Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
A10 Networks ADC ALG Security Technical Implementation Guide
Profiles
III - Administrative Sensitive
III - Administrative Sensitive
An XCCDF Profile
Details
Items
Prose
32 rules organized in 32 groups
SRG-NET-000077-ALG-000046
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used to load balance web applications, must enable external logging for accessing Web Application Firewall data event messages.
Low Severity
<VulnDiscussion>Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. External logging must be enabled for WAF data event messages. Create a server configuration for each log server, and then add a TCP or UDP port to each server configuration, with the port number on which the external log server listens for log messages.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000088-ALG-000054
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must send an alert to, at a minimum, the ISSO and SCA when connectivity to the Syslog servers is lost.
Low Severity
<VulnDiscussion>It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. Possible audit processing failures also include the inability of device to write to the central audit log. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations, (i.e., all audit data storage repositories combined), or both. This does not apply to audit logs generated on behalf of the device itself (management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000131-ALG-000085
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must not have unnecessary scripts installed.
Medium Severity
<VulnDiscussion>Information systems are capable of providing a wide variety of functions (capabilities or processes) and services. Some of these functions and services are installed and enabled by default. The organization must determine which functions and services are required to perform the content filtering and other necessary core functionality for each component of the device. Unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. The A10 Networks ADC can use a TCL-based scripting language called aFleX. Scripts used by an A10 Networks ADC must be documented so that Administrative and Security personnel understand them.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000131-ALG-000086
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must use DNS Proxy mode when Global Server Load Balancing is used.
Medium Severity
<VulnDiscussion>Unrelated or unneeded proxy services increase the attack vector and add excessive complexity to the securing of the device. Multiple application proxies can be installed on many devices. However, proxy types must be limited to related functions. The A10 Networks ADC is capable of DNS-based Global Server Load Balancing (GSLB), which uses Domain Name Service (DNS) to expand load balancing to larger scales, including globally. Global Server Load Balancing can operate in either Proxy mode or Server mode. In Proxy mode, all DNS queries arriving at the DNS Proxy IP address are forwarded to the existing DNS server. In Server mode, the device directly responds to queries for specific service IP addresses in the GSLB zone and can reply with A, AAAA, MX, NS, PTR, SRV, and SOA records. For all other records, the ACOS device will attempt Proxy mode unless configured as fully authoritative.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000132-ALG-000087
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must be configured to prohibit or restrict the use of functions, ports, protocols, and/or services as defined in the PPSM CAL and vulnerability assessments.
Medium Severity
<VulnDiscussion>In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types); organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems. The device must be configured to prevent or restrict the use of prohibited ports, protocols, and services throughout the network by filtering the network traffic and disallowing or redirecting traffic as necessary. Default and updated policy filters from the vendors will disallow older version of protocols and applications and will address most known non-secure ports, protocols, and/or services. However, sources for further policy filters are the IAVMs and the PPSM requirements.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000164-ALG-000100
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC when used for TLS encryption and decryption must validate certificates used for TLS functions by performing RFC 5280-compliant certification path validation.
Medium Severity
<VulnDiscussion>A certificate's certification path is the path from the end entity certificate to a trusted root certification authority (CA). Certification path validation is necessary for a relying party to make an informed decision regarding acceptance of an end entity certificate. Certification path validation includes checks such as certificate issuer trust, time validity and revocation status for each certificate in the certification path. Revocation status information for CA and subject certificates in a certification path is commonly provided via certificate revocation lists (CRLs) or online certificate status protocol (OCSP) responses. The A10 Networks ADC can be configured to use Open Certificate Status Protocol (OCSP) and/or certificate revocation lists (CRLs) to verify the revocation status of certificates. OCSP is preferred since it reduces the overhead associated with CRLs.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000202-ALG-000124
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must not have any unnecessary or unapproved virtual servers configured.
Medium Severity
<VulnDiscussion>A deny-all, permit-by-exception network communications traffic policy ensures that only those connections which are essential and approved are allowed. A virtual server is an instance where the device accepts traffic from outside hosts and redirects traffic to one or more real servers. In keeping with a deny-all, permit-by-exception policy, the services that the device provides to outside hosts must be only those that are necessary, documented, and approved.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000273-ALG-000129
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used to load balance web applications, must strip HTTP response headers.
Medium Severity
<VulnDiscussion>Providing too much information in error messages risks compromising the data and security of the application and system. HTTP response headers can disclose vulnerabilities about a web server. This information can be used by an attacker. The A10 Networks ADC can filter response headers; this removes the web server’s identifying headers in outgoing responses (such as Server, X-Powered-By, and X-AspNet-Version).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000273-ALG-000129
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used to load balance web applications, must replace response codes.
Medium Severity
<VulnDiscussion>Providing too much information in error messages risks compromising the data and security of the application and system. HTTP response codes can be used by an attacker to learn how a web server responds to particular inputs. Certain codes reveal that a security device or the web server defended against a particular attack, which enables the attacker to eliminate that attack as an option. Using ambiguous response codes makes it more difficult for an attacker to determine what defenses are in place. The A10 Networks ADC can be configured to cloak 4xx and 5xx response codes for outbound responses from a web server. The acceptable HTTP response codes are contained in the preconfigured WAF policy file named "allowed_resp_codes".</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000318-ALG-000014
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC must detect and prevent SQL and other code injection attacks launched against data storage objects, including, at a minimum, databases, database records, queries, and fields.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to prevent attacks launched against organizational information from unauthorized data mining may result in the compromise of information. Injection attacks allow an attacker to inject code into a program or query or inject malware onto a computer to execute remote commands that can read or modify a database, or change data on a website. Web applications frequently access databases to store, retrieve, and update information. An attacker can construct inputs that the database will execute. This is most commonly referred to as a code injection attack. This type of attack includes XPath and LDAP injections. The A10 Networks ADC contains a WAF policy file that provides a basic collection of SQL special characters and keywords that are common to SQL injection attacks. The terms in this policy file can trigger commands in the back-end SQL database and allow unauthorized users to obtain sensitive information. If a request contains a term that matches a search definition in the “sqlia_defs” policy file, the device can be configured to sanitize the request of the SQL command or deny the request entirely. The "sanitize" option uses more processor cycles than the preferred option of “drop”.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000318-ALG-000151
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC must detect and prevent code injection attacks launched against application objects including, at a minimum, application URLs and application code.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to prevent attacks launched against organizational information from unauthorized data mining may result in the compromise of information. Injection attacks allow an attacker to inject code into a program or query or inject malware onto a computer to execute remote commands that can read or modify a database, or change data on a website. These attacks include buffer overrun, XML, JavaScript, and HTML injections.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000318-ALG-000152
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC providing content filtering must prevent SQL injection attacks launched against data storage objects, including, at a minimum, databases, database records, and database fields.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to prevent attacks launched against organizational information from unauthorized data mining may result in the compromise of information. SQL injection attacks are the most prevalent attacks against web applications and databases. These attacks inject SQL commands that can read, modify, or compromise the meaning of the original SQL query. An attacker can spoof identity; expose, tamper, destroy, or make existing data unavailable; or gain unauthorized privileges on the database server.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000319-ALG-000015
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC providing content filtering must detect code injection attacks from being launched against data storage objects, including, at a minimum, databases, database records, queries, and fields.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to detect attacks launched against organizational databases may result in the compromise of information. Injection attacks allow an attacker to inject code into a program or query or inject malware onto a computer to execute remote commands that can read or modify a database, or change data on a website. Web applications frequently access databases to store, retrieve, and update information. An attacker can construct inputs that the database will execute. This is most commonly referred to as a code injection attack. This type of attack includes XPath and LDAP injections.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000319-ALG-000020
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC providing content filtering must detect SQL injection attacks launched against data storage objects, including, at a minimum, databases, database records, and database fields.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to detect attacks launched against organizational databases may result in the compromise of information. SQL injection attacks are the most prevalent attacks against web applications and databases. These attacks inject SQL commands that can read, modify, or compromise the meaning of the original SQL query. An attacker can spoof identity; expose, tamper, destroy, or make existing data unavailable; or gain unauthorized privileges on the database server.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000319-ALG-000153
1 Rule
<GroupDescription></GroupDescription>
To protect against data mining, the A10 Networks ADC providing content filtering as part of its intermediary services must detect code injection attacks launched against application objects including, at a minimum, application URLs and application code.
Medium Severity
<VulnDiscussion>Data mining is the analysis of large quantities of data to discover patterns and is used in intelligence gathering. Failure to detect attacks launched against organizational applications may result in the compromise of information. Injection attacks allow an attacker to inject code into a program or query or inject malware onto a computer to execute remote commands that can read or modify a database, or change data on a website. These attacks include buffer overrun, XML, JavaScript, and HTML injections.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000355-ALG-000117
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC being used for TLS encryption and decryption using PKI-based user authentication must only accept end entity certificates issued by DoD PKI or DoD-approved PKI Certificate Authorities (CAs) for the establishment of protected sessions.
Medium Severity
<VulnDiscussion>Non-DoD approved PKIs have not been evaluated to ensure that they have security controls and identity vetting procedures in place which are sufficient for DoD systems to rely on the identity asserted in the certificate. PKIs lacking sufficient security controls and identity vetting procedures risk being compromised and issuing certificates that enable adversaries to impersonate legitimate users. The authoritative list of DoD-approved PKIs is published at http://iase.disa.mil/pki-pke/interoperability. DoD-approved PKI CAs may include Category I, II, and III certificates. Category I DoD-Approved External PKIs are PIV issuers. Category II DoD-Approved External PKIs are Non-Federal Agency PKIs cross certified with the Federal Bridge Certification Authority (FBCA). Category III DoD-Approved External PKIs are Foreign, Allied, or Coalition Partner PKIs. Deploying the device with TLS enabled will require the installation of DoD and/or DoD-Approved CA certificates in the trusted root certificate store of each proxy to be used for TLS traffic. This requirement focuses on communications protection for the application session rather than for the network packet.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000362-ALG-000112
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must protect against TCP and UDP Denial of Service (DoS) attacks by employing Source-IP based connection-rate limiting.
High Severity
<VulnDiscussion>If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Installation of content filtering gateways and application layer firewalls at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type. Detection components that use rate-based behavior analysis can detect attacks when signatures for the attack do not exist or are not installed. These attacks include zero-day attacks which are new attacks for which vendors have not yet developed signatures. Rate-based behavior analysis can detect sophisticated, Distributed DoS (DDoS) attacks by correlating traffic information from multiple network segments or components. This requirement applies to the communications traffic functionality of the device as it pertains to handling communications traffic, rather than to the device itself. The A10 Networks ADC provides Source-IP based connection-rate limiting to mitigate UDP floods and similar attacks. Source-IP based connection-rate limiting protects the system from excessive connection requests from individual clients. If traffic from a client exceeds the configured threshold, the device should be configured to lock out the client for a specified number of seconds. During the lockout period, all connection requests from the client are dropped. The lockout period ranges from 1-3600 seconds (1 hour); there is no default value.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000362-ALG-000120
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must implement load balancing to limit the effects of known and unknown types of Denial of Service (DoS) attacks.
Medium Severity
<VulnDiscussion>Although maintaining high availability is normally an operational consideration, load balancing is also a useful strategy in mitigating network-based DoS attacks. If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Load balancing provides service redundancy which reduces the susceptibility of the enclave to many DoS attacks. Since one of the primary purposes of the Application Delivery Controller is to balance loads across multiple servers, it would be extremely unusual for it to not be configured to perform this function.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000362-ALG-000126
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must enable DDoS filters.
Medium Severity
<VulnDiscussion>If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Installation of content filtering gateways and application layer firewalls at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume, type, or protocol usage. Detection components that use signatures can detect known attacks by using known attack signatures. Signatures are usually obtained from and updated by the vendor.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364-ALG-000122
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used to load balance web applications, must examine incoming user requests against the URI White Lists.
Medium Severity
<VulnDiscussion>Unrestricted traffic may contain malicious traffic, which poses a threat to an enclave or to other connected networks. Additionally, unrestricted traffic may transit a network, which uses bandwidth and other resources. Access control policies and access control lists implemented on devices that control the flow of network traffic (e.g., application level firewalls and Web content filters), ensure the flow of traffic is only allowed from authorized sources to authorized destinations. Networks with different levels of trust (e.g., the Internet or CDS) must be kept separate. The URI White List defines acceptable destination URIs allowed for incoming requests. The White List Check compares the URI of an incoming request against the rules contained in the URI White List policy file. Connection requests are accepted only if the URI matches a rule in the URI White List. Note: A URI Black List can also be configured, which takes priority over a URI White List. However, since deny-all, permit by exception is a fundamental principle, a URI White List is necessary.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000383-ALG-000135
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used to load balance web applications, must enable external logging for WAF data event messages.
Low Severity
<VulnDiscussion>Without coordinated reporting between separate devices, it is not possible to identify the true scale and possible target of an attack. External logging must be enabled for WAF data event messages. External logging is activated once the WAF template that uses the logging template is bound to an HTTP/HTTPS virtual port.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000392-ALG-000141
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must enable logging for packet anomaly events.
Medium Severity
<VulnDiscussion>Without an alert, security personnel may be unaware of major detection incidents that require immediate action and this delay may result in the loss or compromise of information. Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema. These systems must generate an alert when detection events from real-time monitoring occur. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The device must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. The A10 Networks ADC must be configured to generate a log message when IP anomalies are detected.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000392-ALG-000142
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must generate an alert to, at a minimum, the ISSO and ISSM when threats identified by authoritative sources (e.g., IAVMs or CTOs) are detected.
Medium Severity
<VulnDiscussion>Without an alert, security personnel may be unaware of major detection incidents that require immediate action and this delay may result in the loss or compromise of information. The device generates an alert which notifies designated personnel of the Indicators of Compromise (IOCs) which require real-time alerts. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. These indicators reflect the occurrence of a compromise or a potential compromise. Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The device must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000392-ALG-000148
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must enable logging of Denial of Service (DoS) attacks.
Medium Severity
<VulnDiscussion>Without an alert, security personnel may be unaware of major detection incidents that require immediate action, and this delay may result in the loss or compromise of information. CJCSM 6510.01B, "Cyber Incident Handling Program", lists nine Cyber Incident and Reportable Event Categories. DoD has determined that categories identified by CJCSM 6510.01B Major Indicators (category 1, 2, 4, or 7 detection events) will require an alert when an event is detected. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The device must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. The A10 Networks ADC must be configured to generate a log message when IP anomalies and DoS attacks are detected.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000401-ALG-000127
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used for load-balancing web servers, must not allow the HTTP TRACE and OPTIONS methods.
Medium Severity
<VulnDiscussion>HTTP offers a number of methods that can be used to perform actions on the web server. Some of these HTTP methods can be used for nefarious purposes if the web server is misconfigured. The two HTTP methods used for normal requests are GET and POST, so incoming requests should be limited to those methods. Although the HTTP TRACE method is useful for debugging, it enables cross-site scripting attacks. By exploiting certain browser vulnerabilities, an attacker may manipulate the TRACE method. The HEAD, GET, POST, and CONNECT methods are generally regarded as safe. For a WAF template, the GET and POST are the default values and are the safest options, so restriction the methods to GET and POST is recommended.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000402-ALG-000130
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must reveal error messages only to authorized individuals (ISSO, ISSM, and SA).
Medium Severity
<VulnDiscussion>Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can give configuration details about the network element. Limiting access to system logs and administrative consoles to authorized personnel will help to mitigate this risk. However, user feedback and error messages should also be restricted by type and content in accordance with security best practices (e.g., ICMP messages). In the A10 Networks ADC, the audit log is maintained in a separate file separate from the system log. Access to the audit log is role-based. The audit log messages that are displayed for an admin depend upon that administrator’s role (privilege level). Administrators with Root, Read Write, or Read Only privileges who view the audit log can view all the messages, for all system partitions.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000511-ALG-000051
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must, at a minimum, off-load audit log records onto a centralized log server.
Low Severity
<VulnDiscussion>Off-loading ensures audit information does not get overwritten if the limited audit storage capacity is reached and also protects the audit record in case the system/component being audited is compromised. Off-loading is a common process in information systems with limited audit storage capacity. The audit storage on the device is used only in a transitory fashion until the system can communicate with the centralized log server designated for storing the audit records, at which point the information is transferred. However, DoD requires that the log be transferred in real time which indicates that the time from event detection to off-loading is seconds or less. This does not apply to audit logs generated on behalf of the device itself (management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512-ALG-000062
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC, when used for load balancing web servers, must deploy the WAF in active mode.
Medium Severity
<VulnDiscussion>The Web Application Firewall (WAF) supports three operational modes - Learning, Passive, and Active. Active is the standard operational mode and must be used in order to drop or sanitize traffic. Learning mode is used in lab environments to initially set thresholds for certain WAF checks and should not be used in production networks. Passive mode applies enabled WAF checks, but no action is taken upon matching traffic. This mode is useful in identifying false positives for filtering. Only Active mode filters web traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512-ALG-000062
1 Rule
<GroupDescription></GroupDescription>
If the Data Owner requires it, the A10 Networks ADC must be configured to perform CCN Mask, SSN Mask, and PCRE Mask Request checks.
Medium Severity
<VulnDiscussion>If outbound communications traffic is not continuously monitored, hostile activity may not be detected and prevented. Output from application and traffic monitoring serves as input to continuous monitoring and incident response programs. The A10 Networks ADC can be configured to mask data traversing outbound through the device. This is useful in preventing data exfiltration. If any data must be masked before it leaves the enclave (such as Credit Card Numbers, Social Security Numbers, or other sensitive information), a WAF template can be configured with CCN Mask, SSN Mask, and PCRE Mask Request checks. The Mask Request check depends on what information must be masked. This includes using Perl Compatible Regular Expressions (PCRE) for custom masks.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000362-ALG-000112
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must protect against ICMP-based Denial of Service (DoS) attacks by employing ICMP Rate Limiting.
High Severity
<VulnDiscussion>If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Installation of content filtering gateways and application layer firewalls at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type. Detection components that use rate-based behavior analysis can detect attacks when signatures for the attack do not exist or are not installed. These attacks include zero-day attacks which are new attacks for which vendors have not yet developed signatures. Rate-based behavior analysis can detect sophisticated, Distributed DoS (DDoS) attacks by correlating traffic information from multiple network segments or components. The A10 Networks ADC provides an ICMP Rate Limiting feature that monitors the rate of ICMP traffic and drops ICMP packets when the configured thresholds (the normal rate) are exceeded.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512-ALG-000062
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must protect against TCP SYN floods by using TCP SYN Cookies.
Medium Severity
<VulnDiscussion>A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target in an attempt to consume resources, making the device unresponsive to legitimate traffic. TCP SYN Cookies are commonly implemented by the Operating System on endpoints, but are also often implemented on network devices. A10 Networks ADCs provide protection against TCP SYN flood attacks by using SYN cookies. SYN cookies enable the device to continue to serve legitimate clients during a TCP SYN flood attack without allowing illegitimate traffic to consume system resources.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512-ALG-000062
1 Rule
<GroupDescription></GroupDescription>
The A10 Networks ADC must be a FIPS-compliant version.
High Severity
<VulnDiscussion>Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The network element must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated. FIPS compliance is mandated for many functions of network devices. The A10 Networks ADC platforms are either FIPS-compliant versions or non-compliant versions. It is necessary to deploy the FIPS-compliant versions of the model(s). FIPS versions are identified by the designation "FIPS" in the stock keeping unit (SKU).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>