Unclassified Information in Non-federal Information Systems and Organizations (NIST 800-171)

• GnuTLS library
• OpenSSL library
• NSS library
• OpenJDK
• Libkrb5
• BIND
• OpenSSH

$ sudo yum install sudo

$ sudo yum install gnutls-utils

$ sudo yum install openscap-scanner

$ sudo yum install scap-security-guide

$ sudo yum erase abrt-addon-ccpp

$ sudo yum erase abrt-addon-kerneloops

$ sudo yum erase abrt-cli

$ sudo yum erase abrt-plugin-sosreport

$ sudo yum erase gssproxy

$ sudo yum erase iprutils

$ sudo yum erase krb5-workstation

$ sudo yum erase libreport-plugin-logger

$ sudo yum erase libreport-plugin-rhtsupport

$ sudo yum erase python3-abrt-addon

$ sudo yum install dnf-automatic

gpgcheck=1

gpgcheck=0

$ sudo uln_register

$ sudo rpm --import /media/cdrom/RPM-GPG-KEY-oracle

sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

$ sudo systemctl enable dnf-automatic.timer

$ sudo systemctl mask --now debug-shell.service

CtrlAltDelBurstAction=none

ln -sf /dev/null /etc/systemd/system/ctrl-alt-del.target

systemctl mask ctrl-alt-del.target

systemd.confirm_spawn=(1|yes|true|on)

/sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"

grub2-mkconfig -o /boot/grub2/grub.cfg

$ sudo chage -M 180 -m 7 -W 7 USER

* hard maxlogins 

flush = 

## Unsuccessful file access (any other opens) This has to go last.
-a always,exit -F arch=b32 -S open,openat,openat2,open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-access
-a always,exit -F arch=b64 -S open,openat,openat2,open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-access
-a always,exit -F arch=b32 -S open,openat,openat2,open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-access
-a always,exit -F arch=b64 -S open,openat,openat2,open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-access    

augenrules --load

## Successful file access (any other opens) This has to go last.
## These next two are likely to result in a whole lot of events
-a always,exit -F arch=b32 -S open,openat,openat2,open_by_handle_at -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-access
-a always,exit -F arch=b64 -S open,openat,openat2,open_by_handle_at -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-access    

augenrules --load

## First rule - delete all
-D

## Increase the buffers to survive stress events.
## Make this bigger for busy systems
-b 8192

## This determine how long to wait in burst of events
--backlog_wait_time 60000

## Set failure mode to syslog
-f 1    

augenrules --load

## Unsuccessful file creation (open with O_CREAT)
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&0100 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&0100 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b32 -S open -F a1&0100 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S open -F a1&0100 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b32 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&0100 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&0100 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b32 -S open -F a1&0100 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S open -F a1&0100 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b32 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create
-a always,exit -F arch=b64 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-create    

augenrules --load

## Successful file creation (open with O_CREAT)
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&0100 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&0100 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create
-a always,exit -F arch=b32 -S open -F a1&0100 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create
-a always,exit -F arch=b64 -S open -F a1&0100 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create
-a always,exit -F arch=b32 -S creat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create
-a always,exit -F arch=b64 -S creat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-create    

augenrules --load

## Unsuccessful file delete
-a always,exit -F arch=b32 -S unlink,unlinkat,rename,renameat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-delete
-a always,exit -F arch=b64 -S unlink,unlinkat,rename,renameat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-delete
-a always,exit -F arch=b32 -S unlink,unlinkat,rename,renameat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-delete
-a always,exit -F arch=b64 -S unlink,unlinkat,rename,renameat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-delete    

augenrules --load

## Successful file delete
-a always,exit -F arch=b32 -S unlink,unlinkat,rename,renameat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-delete
-a always,exit -F arch=b64 -S unlink,unlinkat,rename,renameat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-delete    

augenrules --load

## Make the loginuid immutable. This prevents tampering with the auid.
--loginuid-immutable    

augenrules --load

## Unsuccessful file modifications (open for write or truncate)
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&01003 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&01003 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b32 -S open -F a1&01003 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S open -F a1&01003 -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b32 -S truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&01003 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&01003 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b32 -S open -F a1&01003 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S open -F a1&01003 -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b32 -S truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification
-a always,exit -F arch=b64 -S truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-modification    

augenrules --load

## Successful file modifications (open for write or truncate)
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&01003 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&01003 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification
-a always,exit -F arch=b32 -S open -F a1&01003 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification
-a always,exit -F arch=b64 -S open -F a1&01003 -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification
-a always,exit -F arch=b32 -S truncate,ftruncate -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification
-a always,exit -F arch=b64 -S truncate,ftruncate -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-modification    

augenrules --load

## These rules watch for kernel module insertion. By monitoring
## the syscall, we do not need any watches on programs.
-a always,exit -F arch=b32 -S init_module,finit_module -F key=module-load
-a always,exit -F arch=b64 -S init_module,finit_module -F key=module-load
-a always,exit -F arch=b32 -S delete_module -F key=module-unload
-a always,exit -F arch=b64 -S delete_module -F key=module-unload    

augenrules --load

## The purpose of these rules is to meet the requirements for Operating
## System Protection Profile (OSPP)v4.2. These rules depends on having
## the following rule files copied to /etc/audit/rules.d:
##
## 10-base-config.rules, 11-loginuid.rules,
## 30-ospp-v42-1-create-failed.rules, 30-ospp-v42-1-create-success.rules,
## 30-ospp-v42-2-modify-failed.rules, 30-ospp-v42-2-modify-success.rules,
## 30-ospp-v42-3-access-failed.rules, 30-ospp-v42-3-access-success.rules,
## 30-ospp-v42-4-delete-failed.rules, 30-ospp-v42-4-delete-success.rules,
## 30-ospp-v42-5-perm-change-failed.rules,
## 30-ospp-v42-5-perm-change-success.rules,
## 30-ospp-v42-6-owner-change-failed.rules,
## 30-ospp-v42-6-owner-change-success.rules
##
## original copies may be found in /usr/share/audit/sample-rules/


## User add delete modify. This is covered by pam. However, someone could
## open a file and directly create or modify a user, so we'll watch passwd and
## shadow for writes
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&03 -F path=/etc/passwd -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&03 -F path=/etc/passwd -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b32 -S open -F a1&03 -F path=/etc/passwd -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b64 -S open -F a1&03 -F path=/etc/passwd -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b32 -S openat,open_by_handle_at -F a2&03 -F path=/etc/shadow -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b64 -S openat,open_by_handle_at -F a2&03 -F path=/etc/shadow -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b32 -S open -F a1&03 -F path=/etc/shadow -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F arch=b64 -S open -F a1&03 -F path=/etc/shadow -F auid>=1000 -F auid!=unset -F key=user-modify

## User enable and disable. This is entirely handled by pam.

## Group add delete modify. This is covered by pam. However, someone could
## open a file and directly create or modify a user, so we'll watch group and
## gshadow for writes
-a always,exit -F path=/etc/passwd -F perm=wa -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F path=/etc/shadow -F perm=wa -F auid>=1000 -F auid!=unset -F key=user-modify
-a always,exit -F path=/etc/group -F perm=wa -F auid>=1000 -F auid!=unset -F key=group-modify
-a always,exit -F path=/etc/gshadow -F perm=wa -F auid>=1000 -F auid!=unset -F key=group-modify


## Use of special rights for config changes. This would be use of setuid
## programs that relate to user accts. This is not all setuid apps because
## requirements are only for ones that affect system configuration.
-a always,exit -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/sbin/usernetctl -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/sbin/seunshare -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/newuidmap -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/newgidmap -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/bin/at -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes
-a always,exit -F path=/usr/sbin/grub2-set-bootflag -F perm=x -F auid>=1000 -F auid!=unset -F key=special-config-changes

## Privilege escalation via su or sudo. This is entirely handled by pam.
## Special case for systemd-run. It is not audit aware, specifically watch it
-a always,exit -F path=/usr/bin/systemd-run -F perm=x -F auid!=unset -F key=maybe-escalation
## Special case for pkexec. It is not audit aware, specifically watch it
-a always,exit -F path=/usr/bin/pkexec -F perm=x -F key=maybe-escalation


## Watch for configuration changes to privilege escalation.
-a always,exit -F path=/etc/sudoers -F perm=wa -F key=special-config-changes
-a always,exit -F dir=/etc/sudoers.d/ -F perm=wa -F key=special-config-changes

## Audit log access
-a always,exit -F dir=/var/log/audit/ -F perm=r -F auid>=1000 -F auid!=unset -F key=access-audit-trail
## Attempts to Alter Process and Session Initiation Information
-a always,exit -F path=/var/run/utmp -F perm=wa -F auid>=1000 -F auid!=unset -F key=session
-a always,exit -F path=/var/log/btmp -F perm=wa -F auid>=1000 -F auid!=unset -F key=session
-a always,exit -F path=/var/log/wtmp -F perm=wa -F auid>=1000 -F auid!=unset -F key=session

## Attempts to modify MAC controls
-a always,exit -F dir=/etc/selinux/ -F perm=wa -F auid>=1000 -F auid!=unset -F key=MAC-policy

## Software updates. This is entirely handled by rpm.

## System start and shutdown. This is entirely handled by systemd

## Kernel Module loading. This is handled in 43-module-load.rules

## Application invocation. The requirements list an optional requirement
## FPT_SRP_EXT.1 Software Restriction Policies. This event is intended to
## state results from that policy. This would be handled entirely by
## that daemon.    

augenrules --load

## Unsuccessful ownership change
-a always,exit -F arch=b32 -S lchown,fchown,chown,fchownat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-owner-change
-a always,exit -F arch=b64 -S lchown,fchown,chown,fchownat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-owner-change
-a always,exit -F arch=b32 -S lchown,fchown,chown,fchownat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-owner-change
-a always,exit -F arch=b64 -S lchown,fchown,chown,fchownat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-owner-change    

augenrules --load

## Successful ownership change
-a always,exit -F arch=b32 -S lchown,fchown,chown,fchownat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-owner-change
-a always,exit -F arch=b64 -S lchown,fchown,chown,fchownat -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-owner-change    

augenrules --load

## Unsuccessful permission change
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-perm-change
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=unsuccessful-perm-change
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-perm-change
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=unsuccessful-perm-change    

augenrules --load

## Successful permission change
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-perm-change
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F success=1 -F auid>=1000 -F auid!=unset -F key=successful-perm-change    

augenrules --load

# grub2-setpassword

echo 'action(type="omfwd" protocol="tcp" Target="<remote system>" port="6514"
    StreamDriver="gtls" StreamDriverMode="1" StreamDriverAuthMode="x509/name" streamdriver.CheckExtendedKeyPurpose="on")' >> /etc/rsyslog.conf

echo 'global(DefaultNetstreamDriverCAFile="/etc/pki/tls/cert.pem")' >> /etc/rsyslog.conf

• drop
  

  Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.

• block
  

  Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.

• public
  

  For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

• external
  

  For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

• dmz
  

  For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.

• work
  

  For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

• home
  

  For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

• internal
  

  For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.

• trusted
  

  All network connections are accepted.

# firewall-cmd --zone=public --list-all

# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench

# firewall-cmd --get-service

# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https

# firewall-cmd --get-service --permanent

install atm /bin/true

blacklist atm

install can /bin/true

blacklist can

install firewire-core /bin/true

blacklist firewire-core

install sctp /bin/true

blacklist sctp

install tipc /bin/true

blacklist tipc

$ sudo sysctl -w fs.protected_hardlinks=1

fs.protected_hardlinks = 1

$ sudo sysctl -w fs.protected_symlinks=1

fs.protected_symlinks = 1

install cramfs /bin/true

blacklist cramfs

$ sudo sysctl -w kernel.core_pattern=|/bin/false

kernel.core_pattern = |/bin/false

$ sudo sysctl -w kernel.dmesg_restrict=1

kernel.dmesg_restrict = 1

$ sudo sysctl -w kernel.kexec_load_disabled=1

kernel.kexec_load_disabled = 1

$ sudo sysctl -w kernel.perf_event_paranoid=2

kernel.perf_event_paranoid = 2

$ sudo sysctl -w kernel.unprivileged_bpf_disabled=1

kernel.unprivileged_bpf_disabled = 1

$ sudo sysctl -w kernel.yama.ptrace_scope=1

kernel.yama.ptrace_scope = 1

$ sudo sysctl -w net.core.bpf_jit_harden=2

net.core.bpf_jit_harden = 2

$ sudo sysctl -w user.max_user_namespaces=0

user.max_user_namespaces = 0

setenv SSH_USE_STRONG_RNG 32

export SSH_USE_STRONG_RNG=32

ClientAliveInterval 

HostbasedAuthentication no

PermitEmptyPasswords no

GSSAPIAuthentication no

KerberosAuthentication no

PermitRootLogin no

StrictModes yes

Banner /etc/issue

RekeyLimit  

SSH_USE_STRONG_RNG=32