Skip to content
ATO Pathways
  Log In

Juniper Router RTR Security Technical Implementation Guide

Rules, Groups, and Values defined within the XCCDF Benchmark

  • SRG-NET-000205-RTR-000009

    <GroupDescription></GroupDescription>
    Group
    Show

  • SRG-NET-000193-RTR-000114

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper perimeter router must be configured to block inbound packets with source Bogon IP address prefixes.

    &lt;VulnDiscussion&gt;Packets with Bogon IP source addresses should never be allowed to traverse the IP core. Bogon IP networks are RFC1918 address...
    Rule Medium Severity
    Show

  • SRG-NET-000019-RTR-000008

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).

    &lt;VulnDiscussion&gt;Accepting route advertisements belonging to the local AS can result in traffic looping or being black holed, or at a minimum ...
    Rule Medium Severity
    Show

  • SRG-NET-000018-RTR-000004

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to have Gratuitous ARP disabled on all external interfaces.

    &lt;VulnDiscussion&gt;A gratuitous ARP is an ARP broadcast in which the source and destination MAC addresses are the same. It is used to inform the...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000113

    <GroupDescription></GroupDescription>
    Group
    Show

  • SRG-NET-000018-RTR-000001

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself.

    &lt;VulnDiscussion&gt;Fragmented ICMP packets can be generated by hackers for DoS attacks such as Ping O' Death and Teardrop. It is imperative that...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000111

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies.

    &lt;VulnDiscussion&gt;Information flow control regulates where information is allowed to travel within a network and between interconnected network...
    Rule Medium Severity
    Show

  • SRG-NET-000230-RTR-000001

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to implement message authentication for all control plane protocols.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule Medium Severity
    Show

  • SRG-NET-000230-RTR-000003

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to use keys with a duration not exceeding 180 days for authenticating routing protocol messages.

    &lt;VulnDiscussion&gt;If the keys used for routing protocol authentication are guessed, the malicious user could create havoc within the network by...
    Rule Medium Severity
    Show

  • SRG-NET-000168-RTR-000077

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to use encryption for routing protocol authentication.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule Medium Severity
    Show

  • SRG-NET-000168-RTR-000078

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Juniper router must be configured to authenticate all routing protocol messages using NIST-validated FIPS 140-2 message authentication code algorithm.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules