Juniper Router RTR Security Technical Implementation Guide
Rules, Groups, and Values defined within the XCCDF Benchmark
-
SRG-NET-000205-RTR-000009
<GroupDescription></GroupDescription>Group -
SRG-NET-000193-RTR-000114
<GroupDescription></GroupDescription>Group -
The Juniper perimeter router must be configured to block inbound packets with source Bogon IP address prefixes.
<VulnDiscussion>Packets with Bogon IP source addresses should never be allowed to traverse the IP core. Bogon IP networks are RFC1918 address...Rule Medium Severity -
SRG-NET-000019-RTR-000008
<GroupDescription></GroupDescription>Group -
The Juniper BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).
<VulnDiscussion>Accepting route advertisements belonging to the local AS can result in traffic looping or being black holed, or at a minimum ...Rule Medium Severity -
SRG-NET-000018-RTR-000004
<GroupDescription></GroupDescription>Group -
The Juniper router must be configured to have Gratuitous ARP disabled on all external interfaces.
<VulnDiscussion>A gratuitous ARP is an ARP broadcast in which the source and destination MAC addresses are the same. It is used to inform the...Rule Medium Severity -
SRG-NET-000362-RTR-000113
<GroupDescription></GroupDescription>Group -
SRG-NET-000018-RTR-000001
<GroupDescription></GroupDescription>Group -
The Juniper router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself.
<VulnDiscussion>Fragmented ICMP packets can be generated by hackers for DoS attacks such as Ping O' Death and Teardrop. It is imperative that...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.