Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
Firewall Security Requirements Guide
Profiles
I - Mission Critical Classified
I - Mission Critical Classified
An XCCDF Profile
Details
Items
Prose
32 rules organized in 32 groups
SRG-NET-000019
1 Rule
<GroupDescription></GroupDescription>
The firewall must immediately use updates made to policy enforcement mechanisms such as firewall rules, security policies, and security zones.
Medium Severity
<VulnDiscussion>Information flow policies regarding dynamic information flow control include, for example, allowing or disallowing information flows based on changes to the Ports, Protocols, Services Management [PPSM] Category Assurance Levels [CAL] list, vulnerability assessments, or mission conditions. Changing conditions include changes in the threat environment and detection of potentially harmful or adverse events.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000061
1 Rule
<GroupDescription></GroupDescription>
The firewall that filters traffic from the VPN access points must be configured with organization-defined filtering rules that apply to the monitoring of remote access traffic.
Medium Severity
<VulnDiscussion>Remote access devices (such as those providing remote access to network devices and information systems) that lack automated capabilities increase risk and make remote user access management difficult at best. Remote access is access to DoD non-public information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Automated monitoring of remote access sessions allows organizations to detect cyber attacks and also ensure ongoing compliance with remote access policies by auditing connection activities of remote access capabilities from a variety of information system components (e.g., servers, workstations, notebook computers, smart phones, and tablets).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000074
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log entries containing information to establish what type of events occurred.
Medium Severity
<VulnDiscussion>Without establishing what type of event occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Audit event content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked. Associating event types with detected events in the network element logs provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000075
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log entries containing information to establish when (date and time) the events occurred.
Medium Severity
<VulnDiscussion>Without establishing when events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. In order to compile an accurate risk assessment, and provide forensic analysis of network traffic patterns, it is essential for security personnel to know when flow control events occurred (date and time) within the infrastructure. Associating event types with detected events in the network traffic logs provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000076
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log entries containing information to establish the location on the network where the events occurred.
Medium Severity
<VulnDiscussion>Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as network element components, modules, device identifiers, node names, and functionality. Associating information about where the event occurred within the network provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000077
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log entries containing information to establish the source of the events, such as the source IP address at a minimum.
Low Severity
<VulnDiscussion>Without establishing the source of the event, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. In order to compile an accurate risk assessment and provide forensic analysis, security personnel need to know the source of the event. In addition to logging where events occur within the network, the traffic log events must also identify sources of events, such as IP addresses, processes, and node or device names.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000078
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log entries containing information to establish the outcome of the events, such as, at a minimum, the success or failure of the application of the firewall rule.
Medium Severity
<VulnDiscussion>Without information about the outcome of events, security personnel cannot make an accurate assessment as to whether an attack was successful or if changes were made to the security state of the network. Event outcomes can include indicators of event success or failure and event-specific results. They also provide a means to measure the impact of an event and help authorized personnel to determine the appropriate response.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000089
1 Rule
<GroupDescription></GroupDescription>
In the event that communication with the central audit server is lost, the firewall must continue to queue traffic log records locally.
Medium Severity
<VulnDiscussion>It is critical that when the network element is at risk of failing to process traffic logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. Responses to audit failure depend on the nature of the failure mode. In accordance with DoD policy, the traffic log must be sent to a central audit server. When logging functions are lost, system processing cannot be shut down because firewall availability is an overriding concern given the role of the firewall in the enterprise. The system should either be configured to log events to an alternative server or queue log records locally. Upon restoration of the connection to the central audit server, action should be taken to synchronize the local log data with the central audit server. If the central audit server uses User Datagram Protocol (UDP) communications instead of a connection oriented protocol such as TCP, a method for detecting a lost connection must be implemented.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000098
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to use TCP when sending log records to the central audit server.
Medium Severity
<VulnDiscussion>If the default UDP protocol is used for communication between the hosts and devices to the Central Log Server, then log records that do not reach the log server are not detected as a data loss. The use of TCP to transport log records to the log servers improves delivery reliability.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000099
1 Rule
<GroupDescription></GroupDescription>
The firewall must protect the traffic log from unauthorized modification of local log records.
Medium Severity
<VulnDiscussion>If audit data were to become compromised, forensic analysis and discovery of the true source of potentially malicious system activity would be impossible to achieve. To ensure the veracity of audit data, the information system and/or the application must protect audit information from unauthorized modification. This can be achieved through multiple methods, which will depend on system architecture and design. Some commonly employed methods include ensuring log files receive the proper file system permissions and limiting log data locations. Audit information includes all information (e.g., audit records, audit settings, and audit reports) needed to successfully audit information system activity. This does not apply to traffic logs generated on behalf of the device itself (management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000100
1 Rule
<GroupDescription></GroupDescription>
The firewall must protect the traffic log from unauthorized deletion of local log files and log records.
Medium Severity
<VulnDiscussion>If audit data were to become compromised, forensic analysis and discovery of the true source of potentially malicious system activity would be impossible to achieve. To ensure the veracity of audit data, the information system and/or the application must protect audit information from unauthorized modification. This can be achieved through multiple methods, which will depend on system architecture and design. Some commonly employed methods include ensuring log files receive the proper file system permissions and limiting log data locations. Audit information includes all information (e.g., audit records, audit settings, and audit reports) needed to successfully audit information system activity. This requirement does not apply to traffic logs generated on behalf of the device itself (device management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000131
1 Rule
<GroupDescription></GroupDescription>
The firewall must disable or remove unnecessary network services and functions that are not used as part of its role in the architecture.
Medium Severity
<VulnDiscussion>Network devices are capable of providing a wide variety of functions (capabilities or processes) and services. Some of these functions and services are installed and enabled by default. The organization must determine which functions and services are required to perform the content filtering and other necessary core functionality for each component of the firewall. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Some services may be security related but, based on the firewall’s role in the architecture, must not be installed on the same hardware. For example, the device may serve as a router, VPN, or other perimeter services. However, if these functions are not part of the documented role of the firewall in the enterprise or branch architecture, the software and licenses should not be installed on the device. This mitigates the risk of exploitation of unconfigured services or services that are not kept updated with security fixes. If left unsecured, these services may provide a threat vector. Some services are not authorized for combination with the firewall and individual policy must be in place to instruct the administrator to remove these services. Examples of these services are Network Time Protocol (NTP), domain name server (DNS), email server, FTP server, web server, and Dynamic Host Configuration Protocol (DHCP). Only remove unauthorized services. This control is not intended to restrict the use of firewalls with multiple authorized roles.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000192
1 Rule
<GroupDescription></GroupDescription>
The firewall must block outbound traffic containing denial-of-service (DoS) attacks to protect against the use of internal information systems to launch any DoS attacks against other networks or endpoints.
Medium Severity
<VulnDiscussion>DoS attacks can take multiple forms but have the common objective of overloading or blocking a network or host to deny or seriously degrade performance. If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Installation of a firewall at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type. The firewall must include protection against DoS attacks that originate from inside the enclave that can affect either internal or external systems. These attacks may use legitimate or rogue endpoints from inside the enclave. These attacks can be simple "floods" of traffic to saturate circuits or devices, malware that consumes CPU and memory on a device or causes it to crash, or a configuration issue that disables or impairs the proper function of a device. For example, an accidental or deliberate misconfiguration of a routing table can misdirect traffic for multiple networks.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000193
1 Rule
<GroupDescription></GroupDescription>
The firewall implementation must manage excess bandwidth to limit the effects of packet flooding types of denial-of-service (DoS) attacks.
Medium Severity
<VulnDiscussion>A firewall experiencing a DoS attack will not be able to handle production traffic load. The high utilization and CPU caused by a DoS attack will also have an effect on control keep-alives and timers used for neighbor peering resulting in route flapping and will eventually black hole production traffic. The device must be configured to contain and limit a DoS attack's effect on the device's resource utilization. The use of redundant components and load balancing are examples of mitigating "flood-type" DoS attacks through increased capacity.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000202
1 Rule
<GroupDescription></GroupDescription>
The firewall must deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
High Severity
<VulnDiscussion>To prevent malicious or accidental leakage of traffic, organizations must implement a deny-by-default security posture at the network perimeter. Such rulesets prevent many malicious exploits or accidental leakage by restricting the traffic to only known sources and only those ports, protocols, or services that are permitted and operationally necessary. As a managed boundary interface, the firewall must block all inbound and outbound network traffic unless a filter is installed to explicitly allow it. The allow filters must comply with the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and Vulnerability Assessment (VA).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000205
1 Rule
<GroupDescription></GroupDescription>
The perimeter firewall must filter traffic destined to the internal enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL), Vulnerability Assessments (VAs) for that the enclave.
Medium Severity
<VulnDiscussion>The enclave's internal network contains the servers where mission-critical data and applications reside. Malicious traffic can enter from an external boundary or originate from a compromised host internally. Vulnerability assessments must be reviewed by the SA and protocols must be approved by the IA staff before entering the enclave. Firewall filters (e.g., rules, access control lists [ACLs], screens, and policies) are the first line of defense in a layered security approach. They permit authorized packets and deny unauthorized packets based on port or service type. They enhance the posture of the network by not allowing packets to even reach a potential target within the security domain. The filters provided are highly susceptible ports and services that should be blocked or limited as much as possible without adversely affecting customer requirements. Auditing packets attempting to penetrate the network but stopped by the firewall filters will allow network administrators to broaden their protective ring and more tightly define the scope of operation. If the perimeter is in a Deny-by-Default posture and what is allowed through the filter is in accordance with the PPSM CAL and VAs for the enclave, and if the permit rule is explicitly defined with explicit ports and protocols allowed, then all requirements related to the database being blocked would be satisfied.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000235
1 Rule
<GroupDescription></GroupDescription>
The firewall must fail to a secure state upon the failure of the following: system initialization, shutdown, or system abort.
Medium Severity
<VulnDiscussion>Failure to a known safe state helps prevent systems from failing to a state that may cause loss of data or unauthorized access to system resources. Network elements that fail suddenly and with no incorporated failure state planning may leave the hosting system available but with a reduced security protection capability. Preserving the information system state information also facilitates system restart and return to the operational mode of the organization with less disruption to mission-essential processes. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000236
1 Rule
<GroupDescription></GroupDescription>
In the event of a system failure of the firewall function, the firewall must be configured to save diagnostic information, log system messages, and load the most current security policies, rules, and signatures when restarted.
Medium Severity
<VulnDiscussion>Failure to a secure state can address safety or security in accordance with the mission needs of the organization. Failure to a secure state helps prevent a loss of confidentiality, integrity, or availability in the event of a failure of the information system or a component of the system. Preserving state information helps to facilitate the restart of the firewall application and a return to the operational mode with less disruption. This requirement applies to a failure of the firewall function rather than the device or operating system as a whole, which is addressed in the Network Device Management SRG. Since it is usually not possible to test this functionality in a production environment, systems should be validated either in a testing environment or prior to installation. This requirement is usually a function of the design of the firewall. Compliance can be verified by acceptance/validation processes or vendor attestation.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000333
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to send traffic log entries to a central audit server for management and configuration of the traffic log entries.
Medium Severity
<VulnDiscussion>Without the ability to centrally manage the content captured in the traffic log entries, identification, troubleshooting, and correlation of suspicious behavior would be difficult and could lead to a delayed or incomplete analysis of an ongoing attack. The DoD requires centralized management of all network component audit record content. Network components requiring centralized traffic log management must have the ability to support centralized management. The content captured in traffic log entries must be managed from a central location (necessitating automation). Centralized management of traffic log records and logs provides for efficiency in maintenance and management of records, as well as the backup and archiving of those records. Ensure at least one syslog server is configured on the firewall. If the product inherently has the ability to store log records locally, the local log must also be secured. However, this requirement is not met since it calls for a use of a central audit server.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000335
1 Rule
<GroupDescription></GroupDescription>
If communication with the central audit server is lost, the firewall must generate a real-time alert to, at a minimum, the SCA and ISSO.
Medium Severity
<VulnDiscussion>Without a real-time alert (less than a second), security personnel may be unaware of an impending failure of the audit functions and system operation may be adversely impacted. Alerts provide organizations with urgent messages. Automated alerts can be conveyed in a variety of ways, including via a regularly monitored console, telephonically, via electronic mail, via text message, or via websites. Log processing failures include software/hardware errors, failures in the log capturing mechanisms, and log storage capacity being reached or exceeded. Most firewalls use UDP to send audit records to the server and cannot tell if the server has received the transmission, thus the site should either implement a connection-oriented communications solution (e.g., TCP) or implement a heartbeat with the central audit server and send an alert if it is unreachable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000362
1 Rule
<GroupDescription></GroupDescription>
The firewall must employ filters that prevent or limit the effects of all types of commonly known denial-of-service (DoS) attacks, including flooding, packet sweeps, and unauthorized port scanning.
High Severity
<VulnDiscussion>Not configuring a key boundary security protection device such as the firewall against commonly known attacks is an immediate threat to the protected enclave because they are easily implemented by those with little skill. Directions for the attack are obtainable on the Internet and in hacker groups. Without filtering enabled for these attacks, the firewall will allow these attacks beyond the protected boundary. Configure the perimeter and internal boundary firewall to guard against the three general methods of well-known DoS attacks: flooding attacks, protocol sweeping attacks, and unauthorized port scanning. Flood attacks occur when the host receives too much traffic to buffer and slows down or crashes. Popular flood attacks include ICMP flood and SYN flood. A TCP flood attack of SYN packets initiating connection requests can overwhelm the device until it can no longer process legitimate connection requests, resulting in denial of service. An ICMP flood can overload the device with so many echo requests (ping requests) that it expends all its resources responding and can no longer process valid network traffic, also resulting in denial of service. An attacker might use session table floods and SYN-ACK-ACK proxy floods to fill up the session table of a host. In an IP address sweep attack, an attacker sends ICMP echo requests (pings) to multiple destination addresses. If a target host replies, the reply reveals the target’s IP address to the attacker. In a TCP sweep attack, an attacker sends TCP SYN packets to the target device as part of the TCP handshake. If the device responds to those packets, the attacker gets an indication that a port in the target device is open, which makes the port vulnerable to attack. In a UDP sweep attack, an attacker sends UDP packets to the target device. If the device responds to those packets, the attacker gets an indication that a port in the target device is open, which makes the port vulnerable to attack. In a port scanning attack, an unauthorized application is used to scan the host devices for available services and open ports for subsequent use in an attack. This type of scanning can be used as a DoS attack when the probing packets are sent excessively.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must apply ingress filters to traffic that is inbound to the network through any active external interface.
Medium Severity
<VulnDiscussion>Unrestricted traffic to the trusted networks may contain malicious traffic that poses a threat to an enclave or to other connected networks. Additionally, unrestricted traffic may transit a network, which uses bandwidth and other resources. Firewall filters control the flow of network traffic, ensure the flow of traffic is only allowed from authorized sources to authorized destinations. Networks with different levels of trust (e.g., the Internet) must be kept separated.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must apply egress filters to traffic that is outbound from the network through any internal interface.
Medium Severity
<VulnDiscussion>If outbound communications traffic is not filtered, hostile activity intended to harm other networks or packets from networks destined to unauthorized networks may not be detected and prevented. Access control policies and access control lists implemented on devices, such as firewalls, that control the flow of network traffic ensure the flow of traffic is only allowed from authorized sources to authorized destinations. Networks with different levels of trust (e.g., the Internet) must be kept separated. This requirement addresses the binding of the egress filter to the interface/zone rather than the content of the egress filter.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The premise firewall (located behind the premise router) must block all outbound management traffic.
Medium Severity
<VulnDiscussion>The management network must still have its own subnet in order to enforce control and access boundaries provided by Layer 3 network nodes such as routers and firewalls. Management traffic between the managed network elements and the management network is routed via the same links and nodes as that used for production or operational traffic. Safeguards must be implemented to ensure that the management traffic does not leak past the managed network's premise equipment. If a firewall is located behind the premise router, all management traffic must be blocked at that point, with the exception of management traffic destined to premise equipment.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must restrict traffic entering the VPN tunnels to the management network to only the authorized management packets based on destination address.
Medium Severity
<VulnDiscussion>Protect the management network with a filtering firewall configured to block unauthorized traffic. This requirement is similar to the out-of-band management (OOBM) model, when the production network is managed in-band. The management network could also be housed at a Network Operations Center (NOC) that is located locally or remotely at a single or multiple interconnected sites. NOC interconnectivity, as well as connectivity between the NOC and the managed networks’ premise routers, would be enabled using either provisioned circuits or VPN technologies such as IPsec tunnels or MPLS VPN services.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000392
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate an alert that can be forwarded to, at a minimum, the ISSO and ISSM when denial-of-service (DoS) incidents are detected.
Low Severity
<VulnDiscussion>Without an alert, security personnel may be unaware of major detection incidents that require immediate action, and this delay may result in the loss or compromise of information. The firewall generates an alert that notifies designated personnel of the Indicators of Compromise (IOCs), which require real-time alerts. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. These indicators reflect the occurrence of a compromise or a potential compromise. Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema. CJCSM 6510.01B, "Cyber Incident Handling Program", lists nine Cyber Incident and Reportable Event Categories. DoD has determined that categories identified by CJCSM 6510.01B Major Indicators (category 1, 2, 4, or 7 detection events) will require an alert when an event is detected. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The firewall must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000399
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to allow authorized users to record a packet capture based IP, traffic type (TCP, UDP, or ICMP), or protocol.
Medium Severity
<VulnDiscussion>Without the ability to capture, record, and log content related to a user session, investigations into suspicious user activity would be hampered. This configuration ensures the ability to select specific sessions to capture in order to support general auditing/incident investigation or to validate suspected misuse.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000492
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log records when traffic is denied, restricted, or discarded.
Medium Severity
<VulnDiscussion>Without generating log records that log usage of objects by subjects and other objects, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Security objects are data objects that are controlled by security policy and bound to security attributes. The firewall must not forward traffic unless it is explicitly permitted via security policy. Logging for firewall security-related sources such as screens and security policies must be configured separately. To ensure security objects such as firewall filters (i.e., rules, access control lists [ACLs], screens, and policies) send events to a syslog server and local logs, security logging must be configured one each firewall term.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000493
1 Rule
<GroupDescription></GroupDescription>
The firewall must generate traffic log records when attempts are made to send packets between security zones that are not authorized to communicate.
Medium Severity
<VulnDiscussion>Without generating log records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Access for different security levels maintains separation between resources (particularly stored data) of different security domains. The firewall can be configured to use security zones that are configured with different security policies based on risk and trust levels. These zones can be leveraged to prevent traffic from one zone from sending packets to another zone. For example, information from certain IP sources will be rejected if the destination matches specified security zones that are not authorized.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to inspect all inbound and outbound traffic at the application layer.
Medium Severity
<VulnDiscussion>Application inspection enables the firewall to control traffic based on different parameters that exist within the packets such as enforcing application-specific message and field length. Inspection provides improved protection against application-based attacks by restricting the types of commands allowed for the applications. Application inspection all enforces conformance against published RFCs. Some applications embed an IP address in the packet that needs to match the source address that is normally translated when it goes through the firewall. Enabling application inspection for a service that embeds IP addresses, the firewall translates embedded addresses and updates any checksum or other fields that are affected by the translation. Enabling application inspection for a service that uses dynamically assigned ports, the firewall monitors sessions to identify the dynamic port assignments, and permits data exchange on these ports for the duration of the specific session. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to inspect all inbound and outbound IPv6 traffic for unknown or out-of-order extension headers.
Medium Severity
<VulnDiscussion>IPv6 packets with unknown extension headers as well as out-of-order headers can create denial-of-service attacks for other networking components as well as host devices. IPv6 inspection can check conformance to RFC 2460 enforcing the order extension headers. While routers only need to examine the IPv6 destination address and the Hop-by-Hop Options header, firewalls should must recognize and parse through all existing extension headers since the upper-layer protocol information reside in the last header. An attacker is able to chain lots of extension headers in order to pass firewall- & intrusion detections. An attacker can cause a denial of service if an intermediary device or destination host is not capable of processing an extensive or out-of-order chaine of extension headers. Hence it is imperative, that the firewall is configured to drop packets with unknown or out-of-order headers.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000364
1 Rule
<GroupDescription></GroupDescription>
The firewall must be configured to restrict it from accepting outbound packets that contain an illegitimate address in the source address field via an egress filter or by enabling Unicast Reverse Path Forwarding (uRPF).
Medium Severity
<VulnDiscussion>A compromised host in an enclave can be used by a malicious platform to launch cyberattacks on third parties. This is a common practice in "botnets", which are a collection of compromised computers using malware to attack other computers or networks. DDoS attacks frequently leverage IP source address spoofing to send packets to multiple hosts that in turn will then send return traffic to the hosts with the IP addresses that were forged. This can generate significant amounts of traffic. Therefore, protection measures to counteract IP source address spoofing must be taken. When uRPF is enabled in strict mode, the packet must be received on the interface that the device would use to forward the return packet; thereby mitigating IP source address spoofing.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>