Skip to content
Log In

OSPP - Protection Profile for General Purpose Operating Systems

Rules and Groups employed by this XCCDF Profile

  • Set Boot Loader Password in grub2

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br> <br> Since plaintext passwords are a security risk, generate a hash...
    Rule High Severity
    Show

  • UEFI GRUB2 bootloader configuration

    UEFI GRUB2 bootloader configuration
    Group
    Show

  • Set the UEFI Boot Loader Password

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br> <br> Since plaintext passwords are a security risk, generate a hash...
    Rule High Severity
    Show

  • Configure Syslog

    The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lac...
    Group
    Show

  • Ensure Proper Configuration of Log Files

    The file <code>/etc/rsyslog.conf</code> controls where log message are written. These are controlled by lines called <i>rules</i>, which consist of a <i>selector</i> and an <i>action</i>. These rul...
    Group
    Show

  • Ensure cron Is Logging To Rsyslog

    Cron logging must be implemented to spot intrusions or trace cron job status. If <code>cron</code> is not logging to <code>rsyslog</code>, it can be implemented by adding the following to the <i>RU...
    Rule Medium Severity
    Show

  • Rsyslog Logs Sent To Remote Host

    If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log e...
    Group
    Show

  • Ensure Logs Sent To Remote Host

    To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file, which describes the multiple directives necessary...
    Rule Medium Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking wh...
    Group
    Show

  • firewalld

    The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections an...
    Group
    Show

  • Inspect and Activate Default firewalld Rules

    Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. <code>NetworkManager</code>...
    Group
    Show

  • Verify firewalld Enabled

    The firewalld service can be enabled with the following command: 
    $ sudo systemctl enable firewalld.service
    Rule Medium Severity
    Show

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under the <code>/etc/firewalld/services</code> and <code>...
    Group
    Show

  • Set Default firewalld Zone for Incoming Packets

    To set the default zone to <code>drop</code> for the built-in default zone which processes incoming IPv4 and IPv6 packets, modify the following line in <code>/etc/firewalld/firewalld.conf</code> to...
    Rule Medium Severity
    Show

  • Uncommon Network Protocols

    The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences ca...
    Group
    Show

  • Disable ATM Support

    The Asynchronous Transfer Mode (ATM) is a protocol operating on network, data link, and physical layers, based on virtual circuits and virtual paths. To configure the system to prevent the <code>a...
    Rule Medium Severity
    Show

  • Disable CAN Support

    The Controller Area Network (CAN) is a serial communications protocol which was initially developed for automotive and is now also used in marine, industrial, and medical applications. To configur...
    Rule Medium Severity
    Show

  • Disable IEEE 1394 (FireWire) Support

    The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. To configure the system to prevent the <code>firewire-core</code> kernel module from being loaded, add the...
    Rule Low Severity
    Show

  • Disable TIPC Support

    The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the system to prevent the <code>tipc</code> kernel module...
    Rule Low Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...
    Group
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules