Inspect and Activate Default firewalld Rules

Description

Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface's assigned zone can be changed by NetworkManager or via the firewall-config tool.
The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. These are the zones provided by firewalld sorted according to the default trust level of the zones from untrusted to trusted:

• drop
  

  Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.

• block
  

  Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.

• public
  

  For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

• external
  

  For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

• dmz
  

  For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.

• work
  

  For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

• home
  

  For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

• internal
  

  For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.

• trusted
  

  All network connections are accepted.

It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone.
To find out all the settings of a zone, for example the public zone, enter the following command as root:

# firewall-cmd --zone=public --list-all

Example output of this command might look like the following:

# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench

To view the network zones currently active, enter the following command as root:

# firewall-cmd --get-service

The following listing displays the result of this command on common Fedora system:

# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https

Finally to view the network zones that will be active after the next firewalld service reload, enter the following command as root:

# firewall-cmd --get-service --permanent