Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
IBM Hardware Management Console (HMC) Security Technical Implementation Guide
Profiles
III - Administrative Classified
III - Administrative Classified
An XCCDF Profile
Details
Items
Prose
34 rules organized in 34 groups
SRG-OS-000324-GPOS-00125
1 Rule
<GroupDescription></GroupDescription>
Sign-on to the ESCD Application Console must be restricted to only authorized personnel.
Medium Severity
<VulnDiscussion>The ESCD Application Console is used to add, change, and delete port configurations and to dynamically switch paths between devices. Access to the ESCD Application Console is restricted to three classes of personnel: Administrators, service representatives and operators. The administrator sign-on controls passwords at all levels, the service representative sign-on allows access to maintenance procedures, and the operator sign-on allows for configuration changes and use of the Director utilities. Unrestricted use by unauthorized personnel could impact the integrity of the environment. This would result in a loss of secure operations and impact data operating environment integrity. NOTE: Many newer installations no longer support the ESCD Application Console. For installations not supporting the ESCD Application Console, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000062-GPOS-00031
1 Rule
<GroupDescription></GroupDescription>
The ESCON Director Application Console Event log must be enabled.
High Severity
<VulnDiscussion>The ESCON Director Console Event Log is used to record all ESCON Director Changes. Failure to create an ESCON Director Application Console Event log results in the lack of monitoring and accountability of configuration changes. In addition, its use in the execution of a contingency plan could be compromised and security degraded. NOTE: Many newer installations no longer support the ESCON Director Console. For installations not supporting the ESCON Director Console, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000324-GPOS-00125
1 Rule
<GroupDescription></GroupDescription>
The Distributed Console Access Facility (DCAF) Console must be restricted to only authorized personnel.
Medium Severity
<VulnDiscussion>The DCAF Console enables an operator to access the ESCON Director Application remotely. Access to a DCAF Console by unauthorized personnel could result in varying of ESCON Directors online or offline and applying configuration changes. Unrestricted use by unauthorized personnel could lead to bypass of security, unlimited access to the system, and an altering of the environment. This would result in a loss of secure operations and will impact data operating integrity of the environment. NOTE: Many newer installations no longer support the ESCON Director Application. For installations not supporting the ESCON Director Application, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000104-GPOS-00051
1 Rule
<GroupDescription></GroupDescription>
DCAF Console access must require a password to be entered by each user.
Medium Severity
<VulnDiscussion>The DCAF Console enables an operator to access the ESCON Director Application remotely. Access to a DCAF Console by unauthorized personnel could result in varying of ESCON Directors online or offline and applying configuration changes. Unrestricted use by unauthorized personnel could lead to bypass of security, unlimited access to the system, and an altering of the environment. This would result in a loss of secure operations and will impact data operating integrity of the environment. NOTE: Many newer installations no longer support the ESCON Director Application. For installations not supporting the ESCON Director Application, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Unauthorized partitions must not exist on the system complex.
Medium Severity
<VulnDiscussion>The running of unauthorized Logical Partitions (LPARs) could allow a “Trojan horse” version of the operating environment to be introduced into the system complex. This could impact the integrity of the system complex and the confidentiality of the data that resides in it.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
On Classified Systems, Logical Partition must be restricted with read/write access to only its own IOCDS.
Medium Severity
<VulnDiscussion>Unrestricted control over the IOCDS files could result in unauthorized updates and impact the configuration of the environment by allowing unauthorized access to a restricted resource. This could severely damage the integrity of the environment and the system resources.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
Processor Resource/Systems Manager (PR/SM) must not allow unrestricted issuing of control program commands.
Medium Severity
<VulnDiscussion>Unrestricted control over the issuing of system commands by a Logical Partition could result in unauthorized data access and inadvertent updates. This could result in severe damage to system resources.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
Classified Logical Partition (LPAR) channel paths must be restricted.
High Severity
<VulnDiscussion>Restricted LPAR channel paths are necessary to ensure data integrity. Unrestricted LPAR channel path access could result in a compromise of data integrity. When a classified LPAR exists on a mainframe which requires total isolation, all paths to that LPAR must be restricted.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
On Classified Systems the Processor Resource/Systems Manager (PR/SM) must not allow access to system complex data.
Medium Severity
<VulnDiscussion>Allowing unrestricted access to all Logical Partition data could result in the possibility of unauthorized access and updating of data. This could also impact the integrity of the processing environment.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
Central processors must be restricted for classified/restricted Logical Partitions (LPARs).
High Severity
<VulnDiscussion>Allowing unrestricted access to classified processors for all LPARs could cause the corruption and loss of classified data sets, which could compromise classified processing.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
The Hardware Management Console must be located in a secure location.
High Severity
<VulnDiscussion>The Hardware Management Console is used to perform Initial Program Load (IPLs) and control the Processor Resource/System Manager (PR/SM). If the Hardware Management Console is not located in a secure location, unauthorized personnel can bypass security, access the system, and alter the environment. This can lead to loss of secure operations if not corrected immediately.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Dial-out access from the Hardware Management Console Remote Support Facility (RSF) must be restricted to an authorized vendor site.
Medium Severity
<VulnDiscussion>Dial-out access from the Hardware Management Console could impact the integrity of the environment, by enabling the possible introduction of spyware or other malicious code. It is important to note that it should be properly configured to only go to an authorized vendor site. Note: This feature will be activated for Non-Classified Systems only. Also, many newer processors (e.g., zEC12/zBC12 processors) will not have modems. If there is no modem, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Dial-out access from the Hardware Management Console Remote Support Facility (RSF) must be disabled for all classified systems.
High Severity
<VulnDiscussion>This feature will not be activated for any classified systems. Allowing dial-out access from the Hardware Management Console could impact the integrity of the environment by enabling the possible introduction of spyware or other malicious code. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000324-GPOS-00125
1 Rule
<GroupDescription></GroupDescription>
Access to the Hardware Management Console must be restricted to only authorized personnel.
Medium Severity
<VulnDiscussion>Access to the Hardware Management Console if not properly restricted to authorized personnel could lead to a bypass of security, access to the system, and an altering of the environment. This would result in a loss of secure operations and can cause an impact to data operating environment integrity.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
Access to the Hardware Management Console (HMC) must be restricted by assigning users proper roles and responsibilities.
Medium Severity
<VulnDiscussion>Access to the HMC if not properly controlled and restricted by assigning users proper roles and responsibilities, could allow modification to areas outside the need-to-know and abilities of the individual resulting in a bypass of security and an altering of the environment. This would result in a loss of secure operations and can cause an impact to data operating environment integrity.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000324-GPOS-00125
1 Rule
<GroupDescription></GroupDescription>
Automatic Call Answering to the Hardware Management Console must be disabled.
Medium Severity
<VulnDiscussion>Automatic Call Answering to the Hardware Management Console allows unrestricted access by unauthorized personnel and could lead to a bypass of security, access to the system, and an altering of the environment. This would result in a loss of secure operations and impact the integrity of the operating environment, files, and programs. Note: Dial-in access to the Hardware Management Console is prohibited. Also, many newer processors (e.g., zEC12/zBC12 processors) will not have modems. If there is no modem, this check is not applicable.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000062-GPOS-00031
1 Rule
<GroupDescription></GroupDescription>
The Hardware Management Console Event log must be active.
Medium Severity
<VulnDiscussion>The Hardware Management Console controls the operation and availability of the Central Processor Complex (CPC). Failure to create and maintain the Hardware Management Console Event log could result in the lack of monitoring and accountability of CPC control activity. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
The manufacturer’s default passwords must be changed for all Hardware Management Console (HMC) Management software.
High Severity
<VulnDiscussion>The changing of passwords from the HMC default values, blocks malicious users with knowledge of these default passwords, from creating a denial of service or from reconfiguring the HMC topology leading to a compromise of sensitive data. The system administrator will ensure that the manufacturer’s default passwords are changed for all HMC management software.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000080-GPOS-00048
1 Rule
<GroupDescription></GroupDescription>
Predefined task roles to the Hardware Management Console (HMC) must be specified to limit capabilities of individual users.
Medium Severity
<VulnDiscussion>Individual task roles with access to specific resources if not created and restricted, will allow unrestricted access to system functions. The following is an example of some managed resource categories: Tasks are functions that a user can perform, and the managed resource role defines where those tasks might be carried out. The Access Administrator assigns a user ID and user roles to each user of the Hardware Management Console. • OPERATOR OPERATOR • ADVANCED ADVANCED OPERATOR • ACSADMIN ACCESS ADMINISTRTOR • SYSPROG SYSTEM PROGRAMMER • SERVICE SRVICE REPRESENTATIVE Failure to establish this environment may lead to uncontrolled access to system resources.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000104-GPOS-00051
1 Rule
<GroupDescription></GroupDescription>
Individual user accounts with passwords must be maintained for the Hardware Management Console operating system and application.
Medium Severity
<VulnDiscussion>Without identification and authentication, unauthorized users could reconfigure the Hardware Management Console or disrupt its operation by logging in to the system or application and execute unauthorized commands. The System Administrator will ensure individual user accounts with passwords are set up and maintained for the Hardware Management Console. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000077-GPOS-00045
1 Rule
<GroupDescription></GroupDescription>
The PASSWORD History Count value must be set to 10 or greater.
Medium Severity
<VulnDiscussion>History Count specifies the number of previous passwords saved for each USERID and compares it with an intended new password. If there is a match with one of the previous passwords, or with the current password, it will reject the intended new password. The improper setting of any of these fields, individually or in combination with another, can compromise the security of the processing environment.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000076-GPOS-00044
1 Rule
<GroupDescription></GroupDescription>
The PASSWORD expiration day(s) value must be set to equal or less then 60 days.
Medium Severity
<VulnDiscussion>Expiration Day(s) specifies the maximum number of days that each user's password is valid. When a user logs on to the Hardware Management Console it compares the system password interval value specified in the user profile and it uses the lower of the two values to determine if the user's, password has expired. The improper setting of any of these fields, individually or in combination with another, can compromise the security of the processing environment.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000021-GPOS-00005
1 Rule
<GroupDescription></GroupDescription>
Maximum failed password attempts before disable delay must be set to 3 or less.
Medium Severity
<VulnDiscussion>The Maximum failed attempts before disable delay is not set to 3. This specifies the number of consecutive incorrect password attempts the Hardware Management Console allows as 3 times, before setting a 60-minute delay to attempt to retry the password. The improper setting of any of these fields, individually or in combination with another, can compromise the security of the processing environment. Note: The Hardware Management Console does not allow a revoke of a userID. A 60- minute delay time setting is being substituted.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000329-GPOS-00128
1 Rule
<GroupDescription></GroupDescription>
A maximum of 60-minute delay must be specified for the password retry after 3 failed attempts to enter your password
Low Severity
<VulnDiscussion>The Maximum failed attempts before disable delay is not set to 3. This specifies the number of consecutive incorrect password attempts the Hardware Management Console allows as 3 times, before setting a 60-minute delay to attempt to retry the password. The improper setting of any of these fields, individually or in combination with another, can compromise the security of the processing environment. Note: The Hardware Management Console does not allow a revoke of a user ID.A 60-minute delay time setting is being substituted.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000069-GPOS-00037
1 Rule
<GroupDescription></GroupDescription>
The password values must be set to meet the requirements in accordance with DODI 8500.2 for DoD information systems processing sensitive information and above, and CJCSI 6510.01E (INFORMATION ASSURANCE [IA] AND COMPUTER NETWORK DEFENSE [CND]).
Medium Severity
<VulnDiscussion>In accordance with DODI 8500.2 for DOD information systems processing sensitive information and above and CJCSI 6510.01E (INFORMATION ASSURANCE [IA] AND COMPUTER NETWORK DEFENSE [CND]). The following recommendations concerning password requirements are mandatory and apply equally to both classified and unclassified systems: (1) Passwords are to be 14 characters. (2) Passwords are to be a mix of uppercase, lowercase alphabetic, numeric, and special characters, including at least one of each. Special characters include the national characters (i.e., @, #, and $) and other nonalphabetic and nonnumeric characters typically found on a keyboard. The improper setting of any of these fields, individually or in combination with another, can compromise the security of the processing environment. In addition, failure to establish standardized settings for the Hardware Management Console control options introduces the possibility of exposure during the migration process or contingency plan activation.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000029-GPOS-00010
1 Rule
<GroupDescription></GroupDescription>
The terminal or workstation must lock out after a maximum of 15 minutes of inactivity, requiring the account password to resume.
Medium Severity
<VulnDiscussion>If the system, workstation, or terminal does not lock the session after more than15 minutes of inactivity, requiring a password to resume operations, the system or individual data could be compromised by an alert intruder who could exploit the oversight.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000023-GPOS-00006
1 Rule
<GroupDescription></GroupDescription>
The Department of Defense (DoD) logon banner must be displayed prior to any login attempt.
Medium Severity
<VulnDiscussion>Failure to display the required DoD logon banner prior to a login attempt may void legal proceedings resulting from unauthorized access to system resources and may leave the SA, IAO, IAM, and Installation Commander open to legal proceedings for not advising users that keystrokes are being audited.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000366-GPOS-00153
1 Rule
<GroupDescription></GroupDescription>
A private web server must subscribe to certificates, issued from any DOD-authorized Certificate Authority (CA), as an access control mechanism for web users.
Medium Severity
<VulnDiscussion>If the Hardware Management Consoles (HMC) is network-connected, use SSL encryption techniques, through digital certificates to provide message privacy, message integrity and mutual authentication between clients and servers. To maintain data integrity the IBM Certificate distributed with the HMC's is to be replaced by a DOD-authorized Certificate. Note: This check applies only to network-connected HMCs.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000342-GPOS-00133
1 Rule
<GroupDescription></GroupDescription>
Hardware Management Console audit record content data must be backed up.
Medium Severity
<VulnDiscussion>The Hardware Management Console has the ability to backup and display the following data: 1) Critical console data 2) Critical hard disk information 3) Backup of critical CPC data and 4) Security Logs. Failure to backup and archive the listed data could make auditing of system incidents and history unavailable and could impact recovery for failed components. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000037-GPOS-00015
1 Rule
<GroupDescription></GroupDescription>
Audit records content must contain valid information to allow for proper incident reporting.
Medium Severity
<VulnDiscussion>The content of audit data must validate that the information contains: User IDs Successful and unsuccessful attempts to access security files (e.g., audit records, password files, access control files, etc) Date and time of the event Type of event Success or failure of event Successful and unsuccessful logons Denial of access resulting from excessive number of logon attempts Failure to not contain this information may hamper attempts to trace events and not allow proper tracking of incidents during a forensic investigation</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Hardware Management Console management must be accomplished by using the out-of-band or direct connection method.
Medium Severity
<VulnDiscussion>Removing the management traffic from the production network diminishes the security profile of the Hardware Management Console servers by allowing all the management ports to be closed on the production network. The System Administrator will ensure that Hardware Management Console management is accomplished using the out-of-band or direct connection method.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000324-GPOS-00125
1 Rule
<GroupDescription></GroupDescription>
Product engineering access to the Hardware Management Console must be disabled.
High Severity
<VulnDiscussion>The Hardware Management Console has a built-in feature that allows Product Engineers access to the console. With access authority, IBM Product Engineering can log on the Hardware Management Console with an exclusive user identification (ID) that provides tasks and operations for problem determination. Product Engineering access is provided by a reserved password and permanent user ID. You cannot view, discard, or change the password and user ID, but you can control their use for accessing the Hardware Management Console. User IDs and passwords that are hard-coded and cannot be modified are a violation of NIST 800-53 and multiple other compliance regulations. Failure to disable this access would allow unauthorized access and could lead to security violations on the HMC.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Connection to the Internet for IBM remote support must be in compliance with the Remote Access STIGs.
High Severity
<VulnDiscussion>Failure to securely connect to remote sites can leave systems open to multiple attacks and security violations through the network. Failure to securely implement remote support connections can lead to unauthorized access or denial of service attacks on the Hardware Management Console.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-OS-000480-GPOS-00227
1 Rule
<GroupDescription></GroupDescription>
Connection to the Internet for IBM remote support must be in compliance with mitigations specified in the Ports and Protocols and Services Management (PPSM) requirements.
High Severity
<VulnDiscussion>Failure to securely connect to remote sites can leave systems open to multiple attacks and security violations through the network. Failure to securely implement remote support connections can lead to unauthorized access or denial of service attacks on theHardware Management Console.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>