III - Administrative Sensitive
Rules and Groups employed by this XCCDF Profile
-
SRG-NET-000514
Group -
The WLAN inactive/idle session timeout must be set for 30 minutes or less.
A WLAN session that never terminates due to inactivity may allow an opening for an adversary to highjack the session to obtain access to the network.Rule Medium Severity -
SRG-NET-000063
Group -
WLAN components must be Wi-Fi Alliance certified with WPA2 or WPA3.
Wi-Fi Alliance certification ensures compliance with DoD interoperability requirements between various WLAN products.Rule Medium Severity -
SRG-NET-000151
Group -
WLAN components must be FIPS 140-2 or FIPS 140-3 certified and configured to operate in FIPS mode.
If the DoD WLAN components (WLAN AP, controller, or client) are not NIST FIPS 140-2/FIPS 140-3 (Cryptographic Module Validation Program, CMVP) certified, the WLAN system may not adequately protect ...Rule Medium Severity -
SRG-NET-000384
Group -
WLAN signals must not be intercepted outside areas authorized for WLAN access.
Most commercially available WLAN equipment is preconfigured for signal power appropriate to most applications of the WLAN equipment. In some cases, this may permit the signals to be received outsid...Rule Low Severity -
SRG-NET-000063
Group -
The WLAN access point must be configured for Wi-Fi Alliance WPA2 or WPA3 security.
The Wi-Fi Alliance's WPA2/WPA3 certification provides assurance that the device has adequate security functionality and can implement the IEEE 802.11i standard for robust security networks. The pre...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.