CIS Red Hat Enterprise Linux 8 Benchmark for Level 2 - Workstation
Rules and Groups employed by this XCCDF Profile
-
System Settings
Contains rules that check correct system settings.Group -
Installing and Maintaining Software
The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of s...Group -
System and Software Integrity
System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software,...Group -
Software Integrity Checking
Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integr...Group -
Verify Integrity with AIDE
AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created imm...Group -
Install AIDE
Theaidepackage can be installed with the following command:$ sudo yum install aide
Rule Medium Severity -
Build and Test AIDE Database
Run the following command to generate a new database: <pre>$ sudo /usr/sbin/aide --init</pre> By default, the database will be written to the fil...Rule Medium Severity -
Configure AIDE to Verify the Audit Tools
The operating system file integrity tool must be configured to protect the integrity of the audit tools.Rule Medium Severity -
Configure Periodic Execution of AIDE
At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line t...Rule Medium Severity -
System Cryptographic Policies
Linux has the capability to centrally configure cryptographic polices. The command <code>update-crypto-policies</code> is used to set the policy ap...Group -
Configure System Cryptography Policy
To configure the system cryptography policy to use ciphers only from the <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_system_...Rule High Severity -
Configure SSH to use System Crypto Policy
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configu...Rule Medium Severity -
Disk Partitioning
To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logic...Group -
Ensure /dev/shm is configured
The <code>/dev/shm</code> is a traditional shared memory concept. One program will create a memory portion, which other processes (if permitted) ca...Rule Low Severity -
Ensure /home Located On Separate Partition
If user home directories will be stored locally, create a separate partition for <code>/home</code> at installation time (or migrate it later using...Rule Low Severity -
Ensure /tmp Located On Separate Partition
The <code>/tmp</code> directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at...Rule Low Severity -
Ensure /var Located On Separate Partition
The <code>/var</code> directory is used by daemons and other system services to store frequently-changing data. Ensure that <code>/var</code> has i...Rule Low Severity -
Ensure /var/log Located On Separate Partition
System logs are stored in the <code>/var/log</code> directory. Ensure that <code>/var/log</code> has its own partition or logical volume at instal...Rule Low Severity -
Ensure /var/log/audit Located On Separate Partition
Audit logs are stored in the <code>/var/log/audit</code> directory. Ensure that <code>/var/log/audit</code> has its own partition or logical volum...Rule Low Severity -
Ensure /var/tmp Located On Separate Partition
The <code>/var/tmp</code> directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volum...Rule Medium Severity -
GNOME Desktop Environment
GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphi...Group -
Make sure that the dconf databases are up-to-date with regards to respective keyfiles
By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by ...Rule High Severity -
Configure GNOME Login Screen
In the default GNOME desktop, the login is displayed after system boot and can display user accounts, allow users to reboot the system, and allow u...Group -
Disable the GNOME3 Login User List
In the default graphical environment, users logging directly into the system are greeted with a login screen that displays all known users. This fu...Rule Medium Severity -
Disable XDMCP in GDM
XDMCP is an unencrypted protocol, and therefore, presents a security risk, see e.g. <a href="https://help.gnome.org/admin/gdm/stable/security.html....Rule High Severity -
GNOME Media Settings
GNOME media settings that apply to the graphical interface.Group -
Disable GNOME3 Automounting
The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are...Rule Medium Severity -
Disable GNOME3 Automount Opening
The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are...Rule Medium Severity -
Disable GNOME3 Automount running
The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are...Rule Low Severity -
Configure GNOME Screen Locking
In the default GNOME3 desktop, the screen can be locked by selecting the user name in the far right corner of the main panel and selecting <b>Lock<...Group -
Set GNOME3 Screensaver Inactivity Timeout
The idle time-out value for inactivity in the GNOME3 desktop is configured via the <code>idle-delay</code> setting must be set under an appropriate...Rule Medium Severity -
Set GNOME3 Screensaver Lock Delay After Activation Period
To activate the locking delay of the screensaver in the GNOME3 desktop when the screensaver is activated, add or set <code>lock-delay</code> to <co...Rule Medium Severity -
Ensure Users Cannot Change GNOME3 Screensaver Settings
If not already configured, ensure that users cannot change GNOME3 screensaver lock settings by adding <code>/org/gnome/desktop/screensaver/lock-del...Rule Medium Severity -
Ensure Users Cannot Change GNOME3 Session Idle Settings
If not already configured, ensure that users cannot change GNOME3 session idle settings by adding <code>/org/gnome/desktop/session/idle-delay</code...Rule Medium Severity -
Sudo
<code>Sudo</code>, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrato...Group -
Install sudo Package
Thesudopackage can be installed with the following command:$ sudo yum install sudo
Rule Medium Severity -
Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty
The sudo <code>use_pty</code> tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by ma...Rule Medium Severity -
Ensure Sudo Logfile Exists - sudo logfile
A custom log sudo file can be configured with the 'logfile' tag. This rule configures a sudo custom logfile at the default location suggested by CI...Rule Low Severity -
Ensure Users Re-Authenticate for Privilege Escalation - sudo
The sudo <code>NOPASSWD</code> and <code>!authenticate</code> option, when specified, allows a user to execute commands using sudo without having t...Rule Medium Severity -
Require Re-Authentication When Using the sudo Command
The sudo <code>timestamp_timeout</code> tag sets the amount of time sudo password prompt waits. The default <code>timestamp_timeout</code> value is...Rule Medium Severity -
Updating Software
The <code>yum</code> command line tool is used to install and update software packages. The system also provides a graphical software update tool i...Group -
Ensure gpgcheck Enabled In Main yum Configuration
The <code>gpgcheck</code> option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check pack...Rule High Severity -
Ensure gpgcheck Enabled for All yum Package Repositories
To ensure signature checking is not disabled for any repos, remove any lines from files in <code>/etc/yum.repos.d</code> of the form: <pre>gpgcheck...Rule High Severity -
Account and Access Control
In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which...Group -
Enable authselect
Configure user authentication setup to use the <code>authselect</code> tool. If authselect profile is selected, the rule will enable the <xccdf-1.2...Rule Medium Severity -
Warning Banners for System Accesses
Each system should expose as little information about itself as possible. <br><br> System banners, which are typically displayed just before a logi...Group -
Modify the System Login Banner
To configure the system login banner edit <code>/etc/issue</code>. Replace the default text with a message compliant with the local site policy or...Rule Medium Severity -
Modify the System Login Banner for Remote Connections
To configure the system login banner edit <code>/etc/issue.net</code>. Replace the default text with a message compliant with the local site policy...Rule Medium Severity -
Modify the System Message of the Day Banner
To configure the system message banner edit <code>/etc/motd</code>. Replace the default text with a message compliant with the local site policy or...Rule Medium Severity -
Verify Group Ownership of System Login Banner
To properly set the group owner of/etc/issue, run the command:$ sudo chgrp root /etc/issue
Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.