Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
Microsoft Defender Antivirus Security Technical Implementation Guide
Profiles
No profile (default benchmark)
No profile (default benchmark)
An XCCDF Profile
Details
Items
Prose
40 rules organized in 40 groups
SRG-APP-000279
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to automatically take action on all detected tasks.
Medium Severity
<VulnDiscussion>This policy setting allows Microsoft Defender configuration to automatically take action on all detected threats. The action to be taken on a particular threat is determined by the combination of the policy-defined action user-defined action and the signature-defined action. If this policy setting is enabled, Microsoft Defender does not automatically take action on the detected threats but prompts users to choose from the actions available for each threat. If this policy setting is disabled or not configured, Microsoft Defender automatically takes action on all detected threats after a nonconfigurable delay of approximately five seconds.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to run and scan for malware and other potentially unwanted software.
High Severity
<VulnDiscussion>This policy setting turns off Microsoft Defender Antivirus. If this policy setting is enabled, Microsoft Defender Antivirus does not run and computers are not scanned for malware or other potentially unwanted software. When the setting is disabled and a third-party antivirus solution is installed, the two applications can both simultaneously try to protect the system. The two AV solutions both attempt to quarantine the same threat and will fight for access to delete the file. Users will see conflicts and the system may lock up until the two solutions finish processing. When the setting is not configured and a third-party antivirus solution is installed, both applications coexist on the system without conflicts. Defender Antivirus will automatically disable itself and will enable if the third-party solution stops functioning. When the setting is not configured and Defender Antivirus is the only AV solution, Defender AV will run (default state) and receive definition updates. An administrator account is needed to turn off the service. A standard user cannot disable the service.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not exclude files for scanning.
Medium Severity
<VulnDiscussion>This policy setting allows disabling of scheduled and real-time scanning for files under the paths specified or for the fully qualified resources specified. Paths should be added under the Options for this setting. Each entry must be listed as a name value pair where the name should be a string representation of a path or a fully qualified resource name. As an example, a path might be defined as: "c:\Windows" to exclude all files in this directory. A fully qualified resource name might be defined as: "C:\Windows\App.exe". The value is not used and it is recommended that this be set to 0. Exceptions can be made to allow file/folders that are impacting enterprise applications to be excluded from being scanned. All exclusions should be documented and approved.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not exclude files opened by specified processes.
Medium Severity
<VulnDiscussion>This policy setting allows the disabling of scheduled and real-time scanning for any file opened by any of the specified processes. The process itself will not be excluded. To exclude the process, use the Path exclusion. Processes should be added under the options for this setting. Each entry must be listed as a name value pair where the name should be a string representation of the path to the process image. Note that only executables can be excluded. For example, a process might be defined as: "c:\windows\app.exe". The value is not used and it is recommended that this be set to 0.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to enable the Automatic Exclusions feature.
Medium Severity
<VulnDiscussion>This setting allows an administrator to specify if Automatic Exclusions feature for Server SKUs should be turned off.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to disable local setting override for reporting to Microsoft MAPS.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration to join Microsoft MAPS. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to check in real time with MAPS before content is run or accessed.
Medium Severity
<VulnDiscussion>This feature ensures the device checks in real time with the Microsoft Active Protection Service (MAPS) before allowing certain content to be run or accessed. If this feature is disabled, the check will not occur, which will lower the protection state of the device. Enabled - The Block at First Sight setting is turned on. Disabled - The Block at First Sight setting is turned off. This feature requires these Group Policy settings to be set as follows: MAPS >> The "Join Microsoft MAPS" must be enabled or the "Block at First Sight" feature will not function. MAPS >> The "Send file samples when further analysis is required" should be set to 1 (Send safe samples) or 3 (Send all samples). Setting to 0 (Always Prompt) will lower the protection state of the device. Setting to 2 (Never send) means the "Block at First Sight" feature will not function. Real-time Protection >> The "Scan all downloaded files and attachments" policy must be enabled or the "Block at First Sight" feature will not function. Real-time Protection >> Do not enable the "Turn off real-time protection" policy or the "Block at First Sight" feature will not function.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to join Microsoft MAPS.
Medium Severity
<VulnDiscussion>This policy setting allows joining Microsoft MAPS. Microsoft MAPS is the online community that helps in choosing how to respond to potential threats. The community also helps stop the spread of new malicious software infections. You can choose to send basic or additional information about detected software. Additional information helps Microsoft create new definitions and protect your computer. This information can include things like location of detected items on your computer if harmful software was removed. The information will be automatically collected and sent. In some instances personal information might unintentionally be sent to Microsoft. However Microsoft will not use this information to identify you or contact you. Possible options are: (0x0) Disabled (default) (0x1) Basic membership (0x2) Advanced membership Basic membership will send basic information to Microsoft about software that has been detected, including where the software came from, the actions that you apply or that are applied automatically, and whether the actions were successful. Advanced membership will send, in addition to basic information, more information to Microsoft about malicious software spyware and potentially unwanted software, including the location of the software file names, how the software operates, and how it has impacted your computer. If this setting is enabled, you will join Microsoft MAPS with the membership specified. If this setting is disabled or do not configured, you will not join Microsoft MAPS. In Windows 10, Basic membership is no longer available, so setting the value to 1 or 2 enrolls the device into Advanced membership.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to only send safe samples for MAPS telemetry.
Medium Severity
<VulnDiscussion>This policy setting configures behavior of samples submission when opt-in for MAPS telemetry is set. Possible options are: (0x0) Always prompt (0x1) Send safe samples automatically (0x2) Never send (0x3) Send all samples automatically</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured for protocol recognition for network protection.
Medium Severity
<VulnDiscussion>This policy setting allows the configuration of protocol recognition for network protection against exploits of known vulnerabilities. If this setting is enabled or not configured, protocol recognition will be enabled. If this setting is disabled, protocol recognition will be disabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000112
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not allow local override of monitoring for file and program activity.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration of monitoring for file and program activity on your computer. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000112
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not allow override of monitoring for incoming and outgoing file activity.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration of monitoring for incoming and outgoing file activity. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000209
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not allow override of scanning for downloaded files and attachments.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration of scanning for all downloaded files and attachments. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to not allow override of behavior monitoring.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration of behavior monitoring. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV Group Policy settings must take priority over the local preference settings.
Medium Severity
<VulnDiscussion>This policy setting configures a local override for the configuration to turn on real-time protection. This setting can only be set by Group Policy. If this setting is enabled, the local preference setting will take priority over Group Policy. If this setting is disabled or not configured, Group Policy will take priority over the local preference setting.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must monitor for incoming and outgoing files.
Medium Severity
<VulnDiscussion>This policy setting allows the configuration of monitoring for incoming and outgoing files without having to turn off monitoring entirely. It is recommended for use on servers that have a lot of incoming and outgoing file activity but for performance reasons need to have scanning disabled for a particular scan direction. The appropriate configuration should be evaluated based on the server role. Note that this configuration is only honored for NTFS volumes. For any other file system type, full monitoring of file and program activity will be present on those volumes. The options for this setting are mutually exclusive: 0 = Scan incoming and outgoing files (default) 1 = Scan incoming files only 2 = Scan outgoing files only Any other value, or if the value does not exist, resolves to the default (0). If this setting is enabled, the specified type of monitoring will be enabled. If this setting is disabled or not configured, monitoring for incoming and outgoing files will be enabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to monitor for file and program activity.
Medium Severity
<VulnDiscussion>This policy setting allows configuration of monitoring for file and program activity. If this setting is enabled or not configured, monitoring for file and program activity will be enabled. If this setting is disabled, monitoring for file and program activity will be disabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000209
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to scan all downloaded files and attachments.
Medium Severity
<VulnDiscussion>This policy setting allows configuration of scanning for all downloaded files and attachments. If this setting is enabled or not configured, scanning for all downloaded files and attachments will be enabled. If this setting is disabled, scanning for all downloaded files and attachments will be disabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to always enable real-time protection.
Medium Severity
<VulnDiscussion>This policy setting turns off real-time protection prompts for known malware detection. Microsoft Defender Antivirus alerts when malware or potentially unwanted software attempts to install itself or to run on your computer. If this policy setting is enabled, Microsoft Defender Antivirus will not prompt users to take actions on malware detections. If this policy setting is disabled or not configured, Microsoft Defender Antivirus will prompt users to take actions on malware detections.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to enable behavior monitoring.
Medium Severity
<VulnDiscussion>This policy setting allows configuration of behavior monitoring. If this setting is enabled or not configured, behavior monitoring will be enabled. If this setting is disabled, behavior monitoring will be disabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to process scanning when real-time protection is enabled.
Medium Severity
<VulnDiscussion>This policy setting allows the configuration of process scanning when real-time protection is turned on. This helps to catch malware, which could start when real-time protection is turned off. If this setting is enabled or not configured, a process scan will be initiated when real-time protection is turned on. If this setting is disabled, a process scan will not be initiated when real-time protection is turned on.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000278
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to scan archive files.
Medium Severity
<VulnDiscussion>This policy setting allows the configuration of scans for malicious software and unwanted software in archive files such as .ZIP or .CAB files. If this setting is enabled or not configured, archive files will be scanned. If this setting is disabled, archive files will not be scanned.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000073
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to scan removable drives.
Medium Severity
<VulnDiscussion>This policy setting allows the management of whether or not to scan for malicious software and unwanted software in the contents of removable drives such as USB flash drives when running a full scan. If this setting is enabled, removable drives will be scanned during any type of scan. If this setting is disabled or not configured, removable drives will not be scanned during a full scan. Removable drives may still be scanned during quick scan and custom scan.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000277
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to perform a weekly scheduled scan.
Medium Severity
<VulnDiscussion>This policy setting allows specifying the day of the week on which to perform a scheduled scan. The scan can also be configured to run every day or to never run at all. This setting can be configured with the following ordinal number values: (0x0) Every Day (0x1) Sunday (0x2) Monday (0x3) Tuesday (0x4) Wednesday (0x5) Thursday (0x6) Friday (0x7) Saturday (0x8) Never (default) If this setting is enabled, a scheduled scan will run at the frequency specified. If this setting is disabled or not configured, a scheduled scan will run at a default frequency.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to turn on e-mail scanning.
Medium Severity
<VulnDiscussion>This policy setting allows the configuration of e-mail scanning. When e-mail scanning is enabled, the engine will parse the mailbox and mail files according to their specific format in order to analyze the mail bodies and attachments. Several e-mail formats are currently supported, for example: pst (Outlook), dbx mbx mime (Outlook Express), binhex (Mac). If this setting is enabled, e-mail scanning will be enabled. If this setting is disabled or not configured, e-mail scanning will be disabled.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000276
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV spyware definition age must not exceed 7 days.
High Severity
<VulnDiscussion>This policy setting allows defining the number of days that must pass before spyware definitions are considered out of date. If definitions are determined to be out of date, this state may trigger several additional actions, including falling back to an alternative update source or displaying a warning icon in the user interface. By default this value is set to 14 days. If this setting is enabled, spyware definitions will be considered out of date after the number of days specified have passed without an update. If this setting is disabled or not configured, spyware definitions will be considered out of date after the default number of days have passed without an update.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000276
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV virus definition age must not exceed 7 days.
High Severity
<VulnDiscussion>This policy setting allows defining the number of days that must pass before virus definitions are considered out of date. If definitions are determined to be out of date, this state may trigger several additional actions, including falling back to an alternative update source or displaying a warning icon in the user interface. By default, this value is set to 14 days. If this setting is enabled, virus definitions will be considered out of date after the number of days specified have passed without an update. If this setting is disabled or not configured, virus definitions will be considered out of date after the default number of days have passed without an update.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000261
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to check for definition updates daily.
Medium Severity
<VulnDiscussion>This policy setting allows specifying the day of the week on which to check for definition updates. The check can also be configured to run every day or to never run at all. This setting can be configured with the following ordinal number values: (0x0) Every Day (default) (0x1) Sunday (0x2) Monday (0x3) Tuesday (0x4) Wednesday (0x5) Thursday (0x6) Friday (0x7) Saturday (0x8) Never If this setting is enabled, the check for definition updates will occur at the frequency specified. If this setting is disabled or not configured, the check for definition updates will occur at a default frequency.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000207
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured for automatic remediation action to be taken for threat alert level Severe.
Medium Severity
<VulnDiscussion>This policy setting allows the customization of which automatic remediation action will be taken for each threat alert level. Threat alert levels should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a threat alert level. The value contains the action ID for the remediation action that should be taken. Valid threat alert levels are: 1 = Low 2 = Medium 4 = High 5 = Severe Valid remediation action values are: 2 = Quarantine 3 = Remove 6 = Ignore</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to block executable content from email client and webmail.
Medium Severity
<VulnDiscussion>This rule blocks the following file types from being run or launched from an email seen in either Microsoft Outlook or webmail (such as Gmail.com or Outlook.com): Executable files (such as .exe, .dll, or .scr) Script files (such as a PowerShell .ps, VisualBasic .vbs, or JavaScript .js file) Script archive files</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured block Office applications from creating child processes.
Medium Severity
<VulnDiscussion>Office apps, such as Word or Excel, will not be allowed to create child processes. This is a typical malware behavior, especially for macro-based attacks that attempt to use Office apps to launch or download malicious executables.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured block Office applications from creating executable content.
Medium Severity
<VulnDiscussion>This rule targets typical behaviors used by suspicious and malicious add-ons and scripts (extensions) that create or launch executable files. This is a typical malware technique. Extensions will be blocked from being used by Office apps. Typically these extensions use the Windows Scripting Host (.wsh files) to run scripts that automate certain tasks or provide user-created add-on features.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to block Office applications from injecting into other processes.
Medium Severity
<VulnDiscussion>Office apps, such as Word, Excel, or PowerPoint, will not be able to inject code into other processes. This is typically used by malware to run malicious code in an attempt to hide the activity from antivirus scanning engines.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to impede JavaScript and VBScript to launch executables.
Medium Severity
<VulnDiscussion>JavaScript and VBScript scripts can be used by malware to launch other malicious apps. This rule prevents these scripts from being allowed to launch apps, thus preventing malicious use of the scripts to spread malware and infect machines.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to block execution of potentially obfuscated scripts.
Medium Severity
<VulnDiscussion>Malware and other threats can attempt to obfuscate or hide their malicious code in some script files. This rule prevents scripts that appear to be obfuscated from running. It uses the AntiMalwareScanInterface (AMSI) to determine if a script is potentially obfuscated and then blocks such a script or blocks scripts when an attempt is made to access them.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to block Win32 imports from macro code in Office.
Medium Severity
<VulnDiscussion>This rule blocks potentially malicious behavior by not allowing macro code to execute routines in the Win 32 dynamic link library (DLL).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000210
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured to prevent user and apps from accessing dangerous websites.
Medium Severity
<VulnDiscussion>Enable Microsoft Defender Exploit Guard network protection to prevent employees from using any application to access dangerous domains that may host phishing scams, exploit-hosting sites, and other malicious content on the internet.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000207
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured for automatic remediation action to be taken for threat alert level High.
Medium Severity
<VulnDiscussion>This policy setting allows the customization of which automatic remediation action will be taken for each threat alert level. Threat alert levels should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a threat alert level. The value contains the action ID for the remediation action that should be taken. Valid threat alert levels are: 1 = Low 2 = Medium 4 = High 5 = Severe Valid remediation action values are: 2 = Quarantine 3 = Remove 6 = Ignore</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000207
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured for automatic remediation action to be taken for threat alert level Medium.
Medium Severity
<VulnDiscussion>This policy setting allows the customization of which automatic remediation action will be taken for each threat alert level. Threat alert levels should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a threat alert level. The value contains the action ID for the remediation action that should be taken. Valid threat alert levels are: 1 = Low 2 = Medium 4 = High 5 = Severe Valid remediation action values are: 2 = Quarantine 3 = Remove 6 = Ignore</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000207
1 Rule
<GroupDescription></GroupDescription>
Microsoft Defender AV must be configured for automatic remediation action to be taken for threat alert level Low.
Medium Severity
<VulnDiscussion>This policy setting allows the customization of which automatic remediation action will be taken for each threat alert level. Threat alert levels should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a threat alert level. The value contains the action ID for the remediation action that should be taken. Valid threat alert levels are: 1 = Low 2 = Medium 4 = High 5 = Severe Valid remediation action values are: 2 = Quarantine 3 = Remove 6 = Ignore</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>