Skip to content
Log In

ANSSI-BP-028 (minimal)

Rules and Groups employed by this XCCDF Profile

  • System Settings

    Contains rules that check correct system settings.
    Group
    Show

  • Installing and Maintaining Software

    The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
    Group
    Show

  • Sudo

    <code>Sudo</code>, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups...
    Group
    Show

  • Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate

    The sudo <code>!authenticate</code> option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the <code>!authe...
    Rule Medium Severity
    Show

  • Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD

    The sudo <code>NOPASSWD</code> tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the <code>NOPASSWD</code...
    Rule Medium Severity
    Show

  • Updating Software

    The <code>yum</code> command line tool is used to install and update software packages. The system also provides a graphical software update tool in the <b>System</b> menu, in the <b>Administration...
    Group
    Show

  • Ensure gpgcheck Enabled In Main yum Configuration

    The <code>gpgcheck</code> option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the ...
    Rule High Severity
    Show

  • Ensure gpgcheck Enabled for Local Packages

    <code>yum</code> should be configured to verify the signature(s) of local packages prior to installation. To configure <code>yum</code> to verify signatures of local packages, set the <code>localpk...
    Rule High Severity
    Show

  • Ensure gpgcheck Enabled for All yum Package Repositories

    To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form: 
    gpgcheck=0
    Rule High Severity
    Show

  • Ensure Red Hat GPG Key Installed

    To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. T...
    Rule High Severity
    Show

  • Ensure Software Patches Installed

    If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates: <pre>$ sudo yum update</pre> If the system is not configu...
    Rule Medium Severity
    Show

  • Account and Access Control

    In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it mor...
    Group
    Show

  • Protect Accounts by Configuring PAM

    PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it sh...
    Group
    Show

  • Set Lockouts for Failed Password Attempts

    The <code>pam_faillock</code> PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in <code>/usr/share/doc/pam-VERSIO...
    Group
    Show

  • Limit Password Reuse

    Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
    Rule Medium Severity
    Show

  • Lock Accounts After Failed Password Attempts

    This rule configures the system to lock out accounts after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple entries in pam files. Th...
    Rule Medium Severity
    Show

  • Configure the root Account for Failed Password Attempts

    This rule configures the system to lock out the <code>root</code> account after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple en...
    Rule Medium Severity
    Show

  • Set Interval For Counting Failed Password Attempts

    Utilizing <code>pam_faillock.so</code>, the <code>fail_interval</code> directive configures the system to lock out an account after a number of incorrect login attempts within a specified time peri...
    Rule Medium Severity
    Show

  • Set Lockout Time for Failed Password Attempts

    This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using <code>pam_faillock.so</code>. Ensure that pam_faillock.so modu...
    Rule Medium Severity
    Show

  • Set Password Quality Requirements

    The default <code>pam_pwquality</code> PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of...
    Group
    Show

  • Set Password Quality Requirements with pam_pwquality

    The <code>pam_pwquality</code> PAM module can be configured to meet requirements for a variety of policies. <br><br> For example, to configure <code>pam_pwquality</code> to require at least one upp...
    Group
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Digit Characters

    The pam_pwquality module's <code>dcredit</code> parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many ...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters

    The pam_pwquality module's <code>lcredit</code> parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Length

    The pam_pwquality module's <code>minlen</code> parameter controls requirements for minimum characters required in a password. Add <code>minlen=<xccdf-1.2:sub idref="xccdf_org.ssgproject.content_val...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Special Characters

    The pam_pwquality module's <code>ocredit=</code> parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be requ...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters

    The pam_pwquality module's <code>ucredit=</code> parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contai...
    Rule Medium Severity
    Show

  • Set Password Hashing Algorithm

    The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.
    Group
    Show

  • Set PAM''s Password Hashing Algorithm

    The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/system-auth", the <code>password</code> section of the file controls which PAM modules ...
    Rule Medium Severity
    Show

  • Protect Accounts by Restricting Password-Based Login

    Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the <code>/etc/passwd</code> and <code>/etc/...
    Group
    Show

  • Set Password Expiration Parameters

    The file <code>/etc/login.defs</code> controls several password-related settings. Programs such as <code>passwd</code>, <code>su</code>, and <code>login</code> consult <code>/etc/login.defs</code> ...
    Group
    Show

  • Set Password Maximum Age

    To specify password maximum age for new accounts, edit the file <code>/etc/login.defs</code> and add or correct the following line: <pre>PASS_MAX_DAYS <xccdf-1.2:sub idref="xccdf_org.ssgproject.con...
    Rule Medium Severity
    Show

  • Set Password Minimum Length in login.defs

    To specify password length requirements for new accounts, edit the file <code>/etc/login.defs</code> and add or correct the following line: <pre>PASS_MIN_LEN <xccdf-1.2:sub idref="xccdf_org.ssgproj...
    Rule Medium Severity
    Show

  • Verify Proper Storage and Existence of Password Hashes

    By default, password hashes for local accounts are stored in the second field (colon-separated) in <code>/etc/shadow</code>. This file should be readable only by processes running with root credent...
    Group
    Show

  • Set number of Password Hashing Rounds - password-auth

    Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the <code>rounds</code> option for the <code>pam_unix</code> PAM module. <br><br> In file <code>...
    Rule Medium Severity
    Show

  • Set number of Password Hashing Rounds - system-auth

    Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the <code>rounds</code> option for the <code>pam_unix</code> PAM module. <br><br> In file <code>...
    Rule Medium Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br><br> Several of th...
    Group
    Show

  • Verify Permissions on Important Files and Directories

    Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verifie...
    Group
    Show

  • Ensure All World-Writable Directories Are Owned by root User

    All directories in local partitions which are world-writable should be owned by root. If any world-writable directories are not owned by root, this should be investigated. Following this, the files...
    Rule Medium Severity
    Show

  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...
    Rule Medium Severity
    Show

  • Ensure All SGID Executables Are Authorized

    The SGID (set group id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SGID files is determine if any were not install...
    Rule Medium Severity
    Show

  • Ensure All SUID Executables Are Authorized

    The SUID (set user id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SUID files is determine if any were not installe...
    Rule Medium Severity
    Show

  • Ensure No World-Writable Files Exist

    It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor f...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a Group

    If any file is not group-owned by a group present in /etc/group, the cause of the lack of group-ownership must be investigated. Following this, those files should be deleted or assigned to an appro...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a User

    If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. Locate the m...
    Rule Medium Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 7 installs on a system and disable softwar...
    Group
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br><br> This guide recommends configuring networ...
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled...
    Group
    Show

  • Uninstall DHCP Server Package

    If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp package can be removed with the following command: 
    $ sudo yum erase dhcp
    Rule Medium Severity
    Show

  • Mail Server Software

    Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...
    Group
    Show

  • Uninstall Sendmail Package

    Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command: 
    $ sudo yum erase sendmail
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules