Skip to content
Log In

ANSSI-BP-028 (intermediary)

Rules and Groups employed by this XCCDF Profile

  • System Settings

    Contains rules that check correct system settings.
    Group
    Show

  • Installing and Maintaining Software

    The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
    Group
    Show

  • System and Software Integrity

    System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevent...
    Group
    Show

  • Software Integrity Checking

    Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of ...
    Group
    Show

  • Verify Integrity with AIDE

    AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and t...
    Group
    Show

  • Install AIDE

    The aide package can be installed with the following command: 
    $ sudo yum install aide
    Rule Medium Severity
    Show

  • Build and Test AIDE Database

    Run the following command to generate a new database: <pre>$ sudo /usr/sbin/aide --init</pre> By default, the database will be written to the file <code>/var/lib/aide/aide.db.new.gz</code>. Sto...
    Rule Medium Severity
    Show

  • Disk Partitioning

    To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning sc...
    Group
    Show

  • Ensure /boot Located On Separate Partition

    It is recommended that the <code>/boot</code> directory resides on a separate partition. This makes it easier to apply restrictions e.g. through the <code>noexec</code> mount option. Eventually, th...
    Rule Medium Severity
    Show

  • Ensure /home Located On Separate Partition

    If user home directories will be stored locally, create a separate partition for <code>/home</code> at installation time (or migrate it later using LVM). If <code>/home</code> will be mounted from ...
    Rule Low Severity
    Show

  • Ensure /opt Located On Separate Partition

    It is recommended that the /opt directory resides on a separate partition.
    Rule Medium Severity
    Show

  • Ensure /srv Located On Separate Partition

    If a file server (FTP, TFTP...) is hosted locally, create a separate partition for <code>/srv</code> at installation time (or migrate it later using LVM). If <code>/srv</code> will be mounted from ...
    Rule Unknown Severity
    Show

  • Ensure /tmp Located On Separate Partition

    The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
    Rule Low Severity
    Show

  • Ensure /usr Located On Separate Partition

    It is recommended that the /usr directory resides on a separate partition.
    Rule Medium Severity
    Show

  • Ensure /var Located On Separate Partition

    The <code>/var</code> directory is used by daemons and other system services to store frequently-changing data. Ensure that <code>/var</code> has its own partition or logical volume at installation...
    Rule Low Severity
    Show

  • Ensure /var/log Located On Separate Partition

    System logs are stored in the /var/log directory. Ensure that /var/log has its own partition or logical volume at installation time, or migrate it using LVM.
    Rule Low Severity
    Show

  • Ensure /var/tmp Located On Separate Partition

    The /var/tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
    Rule Medium Severity
    Show

  • Sudo

    <code>Sudo</code>, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups...
    Group
    Show

  • Install sudo Package

    The sudo package can be installed with the following command: 
    $ sudo yum install sudo
    Rule Medium Severity
    Show

  • Ensure sudo Runs In A Minimal Environment - sudo env_reset

    The sudo <code>env_reset</code> tag, when specified, will run the command in a minimal environment, containing the TERM, PATH, HOME, MAIL, SHELL, LOGNAME, USER and SUDO_* variables. On Red Hat Ente...
    Rule Medium Severity
    Show

  • Ensure sudo Ignores Commands In Current Dir - sudo ignore_dot

    The sudo <code>ignore_dot</code> tag, when specified, will ignore the current directory in the PATH environment variable. On Red Hat Enterprise Linux 7, <code>env_reset</code> is enabled by default...
    Rule Medium Severity
    Show

  • Ensure Privileged Escalated Commands Cannot Execute Other Commands - sudo NOEXEC

    The sudo <code>NOEXEC</code> tag, when specified, prevents user executed commands from executing other commands, like a shell for example. This should be enabled by making sure that the <code>NOEXE...
    Rule High Severity
    Show

  • Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo requiretty

    The sudo <code>requiretty</code> tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the <code>requiretty</code> tag ...
    Rule Medium Severity
    Show

  • Ensure sudo umask is appropriate - sudo umask

    The sudo <code>umask</code> tag, when specified, will be added the to the user's umask in the command environment. On Red Hat Enterprise Linux 7, the default <code>umask</code> value is 0022. The ...
    Rule Medium Severity
    Show

  • Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty

    The sudo <code>use_pty</code> tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the <code>use_pty</code> tag exists...
    Rule Medium Severity
    Show

  • Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate

    The sudo <code>!authenticate</code> option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the <code>!authe...
    Rule Medium Severity
    Show

  • Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD

    The sudo <code>NOPASSWD</code> tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the <code>NOPASSWD</code...
    Rule Medium Severity
    Show

  • Explicit arguments in sudo specifications

    All commands in the sudoers file must strictly specify the arguments allowed to be used for a given user. If the command is supposed to be executed only without arguments, pass "" as an argument in...
    Rule Medium Severity
    Show

  • Don't define allowed commands in sudoers by means of exclusion

    Policies applied by sudo through the sudoers file should not involve negation. Each user specification in the <code>sudoers</code> file contains a comma-delimited list of command specifications. T...
    Rule Medium Severity
    Show

  • Updating Software

    The <code>yum</code> command line tool is used to install and update software packages. The system also provides a graphical software update tool in the <b>System</b> menu, in the <b>Administration...
    Group
    Show

  • Ensure gpgcheck Enabled In Main yum Configuration

    The <code>gpgcheck</code> option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the ...
    Rule High Severity
    Show

  • Ensure gpgcheck Enabled for Local Packages

    <code>yum</code> should be configured to verify the signature(s) of local packages prior to installation. To configure <code>yum</code> to verify signatures of local packages, set the <code>localpk...
    Rule High Severity
    Show

  • Ensure gpgcheck Enabled for All yum Package Repositories

    To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form: 
    gpgcheck=0
    Rule High Severity
    Show

  • Ensure Red Hat GPG Key Installed

    To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. T...
    Rule High Severity
    Show

  • Ensure Software Patches Installed

    If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates: <pre>$ sudo yum update</pre> If the system is not configu...
    Rule Medium Severity
    Show

  • Account and Access Control

    In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it mor...
    Group
    Show

  • Protect Accounts by Configuring PAM

    PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it sh...
    Group
    Show

  • Set Up a Private Namespace in PAM Configuration

    To setup a private namespace add the following line to /etc/pam.d/login: 
    session    required     pam_namespace.so
    Rule Low Severity
    Show

  • Set Lockouts for Failed Password Attempts

    The <code>pam_faillock</code> PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in <code>/usr/share/doc/pam-VERSIO...
    Group
    Show

  • Limit Password Reuse

    Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
    Rule Medium Severity
    Show

  • Lock Accounts After Failed Password Attempts

    This rule configures the system to lock out accounts after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple entries in pam files. Th...
    Rule Medium Severity
    Show

  • Configure the root Account for Failed Password Attempts

    This rule configures the system to lock out the <code>root</code> account after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple en...
    Rule Medium Severity
    Show

  • Set Interval For Counting Failed Password Attempts

    Utilizing <code>pam_faillock.so</code>, the <code>fail_interval</code> directive configures the system to lock out an account after a number of incorrect login attempts within a specified time peri...
    Rule Medium Severity
    Show

  • Set Lockout Time for Failed Password Attempts

    This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using <code>pam_faillock.so</code>. Ensure that pam_faillock.so modu...
    Rule Medium Severity
    Show

  • Set Password Quality Requirements

    The default <code>pam_pwquality</code> PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of...
    Group
    Show

  • Set Password Quality Requirements with pam_pwquality

    The <code>pam_pwquality</code> PAM module can be configured to meet requirements for a variety of policies. <br><br> For example, to configure <code>pam_pwquality</code> to require at least one upp...
    Group
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Digit Characters

    The pam_pwquality module's <code>dcredit</code> parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many ...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters

    The pam_pwquality module's <code>lcredit</code> parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Length

    The pam_pwquality module's <code>minlen</code> parameter controls requirements for minimum characters required in a password. Add <code>minlen=<xccdf-1.2:sub idref="xccdf_org.ssgproject.content_val...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Special Characters

    The pam_pwquality module's <code>ocredit=</code> parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be requ...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules