Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
ISEC7 EMM Suite v6.x Security Technical Implementation Guide
Profiles
I - Mission Critical Sensitive
I - Mission Critical Sensitive
An XCCDF Profile
Details
Items
Prose
34 rules organized in 34 groups
SRG-APP-000148
1 Rule
<GroupDescription></GroupDescription>
ISEC7 EMM Suite must disable or delete local account created during application installation and configuration.
High Severity
<VulnDiscussion>The ISEC7 local account password complexity controls do not meet DoD requirements; therefore, admins have the capability to configure the account out of compliance, which could allow attacker to gain unauthorized access to the server and access to command MDM servers.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000516
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must be configured to leverage the enterprise directory service accounts and groups for ISEC7 EMM Suite server admin identification and authentication.
Medium Severity
<VulnDiscussion>A comprehensive account management process that includes automation helps to ensure the accounts designated as requiring attention are consistently and promptly addressed. If an attacker compromises an account, the entire infrastructure is at risk. Providing automated support functions for the management of accounts will ensure only active accounts will be granted access with the proper authorization levels. These objectives are best achieved by configuring the server to leverage an enterprise authentication mechanism (e.g., Microsoft Active Directory Kerberos).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000516
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must configure the timeout for the console to be 15 minutes or less.
Medium Severity
<VulnDiscussion>A session time-out lock is a temporary action taken when a user (MDM system administrator) stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence. Rather than relying on the user to manually lock their application session prior to vacating the vicinity, applications need to be able to identify when a user's application session has idled and take action to initiate the session lock. The session lock is implemented at the point where session activity can be determined and/or controlled. This is typically at the operating system level and results in a system lock but may be at the application level where the application interface window is secured instead.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000516
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite, Tomcat installation, and ISEC7 Suite monitor must be configured to use the Windows Trust Store for the storage of digital certificates and keys.
Medium Severity
<VulnDiscussion>A trust store provides requisite encryption and access control to protect digital certificates from unauthorized access.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000171
1 Rule
<GroupDescription></GroupDescription>
The Apache Tomcat Manager Web app password must be cryptographically hashed with a DoD approved algorithm.
Medium Severity
<VulnDiscussion>The Apache Tomcat Manager Web app password is stored in plain text in CATALINA_HOME/conf/tomcat-users.xml and should be encrypted so it is not visible to an intruder. Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read and easily compromised. Use of passwords for authentication is intended only for limited situations and should not be used as a replacement for two-factor CAC-enabled authentication. Examples of situations where a user ID and password might be used include: - When the user does not use a CAC and is not a current DoD employee, member of the military, or DoD contractor. - When a user has been officially designated as temporarily unable to present a CAC for some reason (lost, damaged, not yet issued, broken card reader) (i.e., Temporary Exception User) and to satisfy urgent organizational needs must be temporarily permitted to use user ID/password authentication until the problem with CAC use has been remedied. - When the application is publicly available and or hosting publicly releasable data requiring some degree of need-to-know protection. If the password is already encrypted and not a plaintext password, this meets this requirement. Implementation of this requirement requires configuration of FIPS-approved cipher block algorithm and block cipher modes for encryption. This method uses a one-way hashing encryption algorithm with a salt value to validate a user's password without having to store the actual password. Performance and time required to access are factors that must be considered, and the one-way hash is the most feasible means of securing the password and providing an acceptable measure of password security. Verifying the user knows a password is performed using a password verifier. In its simplest form, a password verifier is a computational function that is capable of creating a hash of a password and determining if the value provided by the user matches the hash. A more secure version of verifying a user knowing a password is to store the result of an iterating hash function and a large random salt value as follows: H0 = H(pwd, H(salt)) Hn = H(Hn-1,H(salt)) In the above, "n" is a cryptographically-strong random [*3] number. "Hn" is stored along with the salt. When the application wishes to verify that the user knows a password, it simply repeats the process and compares "Hn" with the stored "Hn". A salt is essentially a fixed-length cryptographically strong random value. Another method is using a keyed-hash message authentication code (HMAC). HMAC calculates a message authentication code via a cryptographic hash function used in conjunction with an encryption key. The key must be protected as with any private key. This requirement applies to all accounts including authentication server, AAA, and local account, including the root account and the account of last resort.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000383
1 Rule
<GroupDescription></GroupDescription>
All Web applications included with Apache Tomcat that are not required must be removed.
Medium Severity
<VulnDiscussion>Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000383
1 Rule
<GroupDescription></GroupDescription>
LockOutRealm must not be removed from Apache Tomcat.
Medium Severity
<VulnDiscussion>LockOutRealm prevents brute force attacks against user passwords. Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000065
1 Rule
<GroupDescription></GroupDescription>
The LockOutRealm must be configured with a login failure count of 3.
Medium Severity
<VulnDiscussion>LockOutRealm prevents brute force attacks against user passwords. Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. Access to LockOutRealm must be configured to control login attempts by local accounts. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000516
1 Rule
<GroupDescription></GroupDescription>
The LockOutRealm must be configured with a login lockout time of 15 minutes.
Medium Severity
<VulnDiscussion>LockOutRealm prevents brute force attacks against user passwords. Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. Access to LockOutRealm must be configured to control login attempts by local accounts. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000439
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must configure Enable HTTPS to use HTTP over SSL in Apache Tomcat.
Medium Severity
<VulnDiscussion>Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. This requirement applies only to those applications that are either distributed or can allow access to data non-locally. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, applications need to leverage transmission protection mechanisms, such as TLS, TLS VPNs, or IPSEC. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000383
1 Rule
<GroupDescription></GroupDescription>
The version number of Apache Tomcat must be removed from the CATALINA_HOME/lib/catalina.jar file.
Medium Severity
<VulnDiscussion>If the version number of Apache Tomcat were visible to an intruder, they could use that information to search for known vulnerabilities of the app. Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000383
1 Rule
<GroupDescription></GroupDescription>
Stack tracing must be disabled in Apache Tomcat.
Medium Severity
<VulnDiscussion>The default error page shows a full stack trace, which is a disclosure of sensitive information. Removal of unneeded or non-secure functions, ports, protocols, and services mitigate the risk of unauthorized connection of devices, unauthorized transfer of information, or other exploitation of these resources. The organization must perform a periodic scan/review of the application (as required by CCI-000384) and disable functions, ports, protocols, and services deemed to be unneeded or non-secure.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000380
1 Rule
<GroupDescription></GroupDescription>
The Apache Tomcat shutdown port must be disabled.
Medium Severity
<VulnDiscussion>Tomcat uses a port (defaults to 8005) as a shutdown port. Someone could Telnet to the machine using this port and send the default command SHUTDOWN. Tomcat and all web apps would shut down in that case, which is a denial of service attack and would cause an unwanted service interruption.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000380
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must remove any unnecessaryusers or groups that have permissions to the server.xml file in Apache Tomcat.
Medium Severity
<VulnDiscussion>Tomcat uses a port (defaults to 8005) as a shutdown port. Someone could Telnet to the machine using this port and send the default command SHUTDOWN. Tomcat and all web apps would shut down in that case, which is a denial of service attack and would cause an unwanted service interruption.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000090
1 Rule
<GroupDescription></GroupDescription>
A manager role must be assigned to the Apache Tomcat Web apps (Manager, Host-Manager).
Medium Severity
<VulnDiscussion>If a manager role is not assigned to the Apache Tomcat web apps, the system administrator will not be able to manage and configure the web apps and security setting may not be configured correctly, with could leave the Apache Tomcat susceptible to attack by an intruder.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000439
1 Rule
<GroupDescription></GroupDescription>
SSL must be enabled on Apache Tomcat.
Medium Severity
<VulnDiscussion>Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. This requirement applies only to those applications that are either distributed or can allow access to data non-locally. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, applications need to leverage transmission protection mechanisms, such as TLS, TLS VPNs, or IPSEC. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000439
1 Rule
<GroupDescription></GroupDescription>
Tomcat SSL must be restricted except for ISEC7 EMM Suite tasks.
Medium Severity
<VulnDiscussion>Restricting the use of SSL helps ensure only authorized users and processes have access to Tomcat Web apps and reduces the attack surface of the ISEC7 EMM Suite. Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. This requirement applies only to those applications that are either distributed or can allow access to data non-locally. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, applications need to leverage transmission protection mechanisms, such as TLS, TLS VPNs, or IPSEC. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000001
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must limit the number of concurrent sessions to an organization-defined number for all accounts and/or account types.
Medium Severity
<VulnDiscussion>Application management includes the ability to control the number of users and user sessions that utilize an application. Limiting the number of allowed users and sessions per user is helpful in limiting risks related to DoS attacks. This requirement may be met via the application or by utilizing information system session control provided by a web server with specialized session management capabilities. If it has been specified that this requirement will be handled by the application, the capability to limit the maximum number of concurrent single user sessions must be designed and built into the application. This requirement addresses concurrent sessions for information system accounts and does not address concurrent sessions by single users via multiple system accounts. The maximum number of concurrent sessions should be defined based upon mission needs and the operational environment for each system.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000003
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must initiate a session lock after a 15-minute period of inactivity.
Medium Severity
<VulnDiscussion>A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system, but does not log out because of the temporary nature of the absence. Rather than relying on the user to manually lock their application session prior to vacating the vicinity, applications need to be able to identify when a user's application session has idled and take action to initiate the session lock. The session lock is implemented at the point where session activity can be determined and/or controlled. This is typically at the operating system-level and results in a system lock, but may be at the application-level where the application interface window is secured instead.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000014
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must use TLS 1.2, at a minimum, to protect the confidentiality of sensitive data during electronic dissemination using remote access.
Medium Severity
<VulnDiscussion>Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol. This requirement applies to Transport Layer Security (TLS) gateways (also known as Secure Sockets Layer [SSL] gateways), web servers, and web applications and is not applicable to virtual private network (VPN) devices. Application protocols such as HTTPS and DNSSEC use TLS as the underlying security protocol and thus are in scope for this requirement. NIST SP 800-52 provides guidance for client negotiation on either DoD-only or on public-facing servers.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000068
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the ISEC7 EMM Suite.
Medium Severity
<VulnDiscussion>Display of the DoD-approved use notification before granting access to the application ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist. The banner must be formatted in accordance with DTM-08-060. Use the following verbiage for applications that can accommodate banners of 1300 characters: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner: "I've read & consent to terms in IS user agreem't."</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000090
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite server must be configured to have at least one user in the following Administrator roles: Security Administrator, Site Administrator, Help Desk User.
Medium Severity
<VulnDiscussion>Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident, or identify those responsible for one. The list of audited events is the set of events for which audits are to be generated. This set of events is typically a subset of the list of all events for which the system is capable of generating audit records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000108
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must alert the ISSO and SA (at a minimum) in the event of an audit processing failure.
Medium Severity
<VulnDiscussion>It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000175
1 Rule
<GroupDescription></GroupDescription>
When using PKI-based authentication for user access, the ISEC7 EMM Suite must validate certificates by constructing a certification path (which includes status information) to an accepted trust anchor.
Medium Severity
<VulnDiscussion>Without path validation, an informed trust decision by the relying party cannot be made when presented with any certificate not already explicitly trusted. To meet this requirement, the information system must create trusted channels between itself and remote trusted authorized IT product (e.g., syslog server) entities that protect the confidentiality and integrity of communications. The information system must create trusted paths between itself and remote administrators and users that protect the confidentiality and integrity of communications. A trust anchor is an authoritative entity represented via a public key and associated data. It is most often used in the context of public key infrastructures, X.509 digital certificates, and DNSSEC. However, applications that do not use a trusted path are not approved for non-local and remote management of DoD information systems. Use of SSHv2 to establish a trusted channel is approved. Use of FTP, TELNET, HTTP, and SNMPV1 is not approved since they violate the trusted channel rule set. Use of web management tools that are not validated by common criteria my also violate trusted channel rule set. When there is a chain of trust, usually the top entity to be trusted becomes the trust anchor; it can be, for example, a Certification Authority (CA). A certification path starts with the subject certificate and proceeds through a number of intermediate certificates up to a trusted root certificate, typically issued by a trusted CA. This requirement verifies that a certification path to an accepted trust anchor is used for certificate validation and that the path includes status information. Path validation is necessary for a relying party to make an informed trust decision when presented with any certificate not already explicitly trusted. Status information for certification paths includes certificate revocation lists or online certificate status protocol responses. Validation of the certificate status information is out of scope for this requirement.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000391
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must accept Personal Identity Verification (PIV) credentials.
Low Severity
<VulnDiscussion>The use of PIV credentials facilitates standardization and reduces the risk of unauthorized access. DoD has mandated the use of the CAC to support identity management and personal authentication for systems covered under HSPD 12, as well as a primary component of layered protection for national security systems.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000395
1 Rule
<GroupDescription></GroupDescription>
Before establishing a local, remote, and/or network connection with any endpoint device, the ISEC7 EMM Suite must use a bidirectional authentication mechanism configured with a FIPS-validated Advanced Encryption Standard (AES) cipher block algorithm to authenticate with the device.
Medium Severity
<VulnDiscussion>Without device-to-device authentication, communications with malicious devices may be established. Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk. Currently, DoD requires the use of AES for bidirectional authentication since it is the only FIPS-validated AES cipher block algorithm. For distributed architectures (e.g., service-oriented architectures), the decisions regarding the validation of authentication claims may be made by services separate from the services acting on those decisions. In such situations, it is necessary to provide authentication decisions (as opposed to the actual authenticators) to the services that need to act on those decisions. A local connection is any connection with a device communicating without the use of a network. A network connection is any connection with a device that communicates through a network (e.g., local area or wide area network; the Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Because of the challenges of applying this requirement on a large scale, organizations are encouraged to apply the requirement only to those limited number (and type) of devices that truly need to support this capability.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000427
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must allow the use of DoD PKI established certificate authorities for verification of the establishment of protected sessions.
Medium Severity
<VulnDiscussion>Untrusted Certificate Authorities (CA) can issue certificates, but they may be issued by organizations or individuals that seek to compromise DoD systems or by organizations with insufficient security controls. If the CA used for verifying the certificate is not a DoD-approved CA, trust of this CA has not been established. The DoD will only accept PKI certificates obtained from a DoD-approved internal or external certificate authority. Reliance on CAs for the establishment of secure sessions includes, for example, the use of TLS certificates. This requirement focuses on communications protection for the application session rather than for the network packet. This requirement applies to applications that utilize communications sessions. This includes, but is not limited to, web-based applications and Service-Oriented Architectures (SOA).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000610
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must use FIPS-validated SHA-2 or higher hash function for digital signature generation and verification (non-legacy use).
Medium Severity
<VulnDiscussion>Without cryptographic integrity protections, information can be altered by unauthorized users without detection. To protect the integrity of the authenticator and authentication mechanism used for the cryptographic module used by the network device, the application, operating system, or protocol must be configured to use one of the following hash functions for hashing the password or other authenticator in accordance with SP 800-131Ar1: SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224, SHA-512/256, SHA3-224, SHA3-256, SHA3-384, and SHA3-512. For digital signature verification, SP800-131Ar1 allows SHA-1 for legacy use where needed.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000635
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must use a FIPS 140-2-validated cryptographic module to implement encryption services for unclassified information requiring confidentiality, generate cryptographic hashes, and to configure web management tools with FIPS-validated Advanced Encryption Standard (AES) cipher block algorithm to protect the confidentiality of maintenance and diagnostic communications for nonlocal maintenance sessions.
Medium Severity
<VulnDiscussion>FIPS 140-2 precludes the use of invalidated cryptography for the cryptographic protection of sensitive or valuable data within Federal systems. Unvalidated cryptography is viewed by NIST as providing no protection to the information or data. In effect, the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, then FIPS 140-2 is applicable. In essence, if cryptography is required, it must be validated. Cryptographic modules that have been approved for classified use may be used in lieu of modules that have been validated against the FIPS 140-2 standard. The cryptographic module used must have one FIPS-validated encryption algorithm (i.e., validated Advanced Encryption Standard [AES]). This validated algorithm must be used for encryption for cryptographic security function within the product being evaluated. EMM Suite is using the standard JCE module coming with OpenJDK 11 (included in installer) or Oracle JRE either legacy 1.8 or latest release. see https://openjdk.java.net/groups/security/ There are two module providers, IBM and RSA. The check/fix are written assuming the RSA module is used. Any FIPS 140-2 compliant JCE module (.jar) can be replaced and configured and used with EMM Suite.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000125
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must back up audit records at least every seven days onto a different system or system component than the system or component being audited, provide centralized management and configuration of the content to be captured in audit records generated by all ISEC7 EMM Suite components, and off-load audit records onto a different system or media than the system being audited.
Medium Severity
<VulnDiscussion>Protection of log data includes assuring log data is not accidentally lost or deleted. Backing up audit records to a different system or onto separate media than the system being audited on an organizationally defined frequency helps to assure in the event of a catastrophic system failure, the audit records will be retained. This helps to ensure a compromise of the information system being audited does not also result in a compromise of the audit records. This requirement only applies to applications that have a native backup capability for audit records. Operating system backup requirements cover applications that do not provide native backup functions. Satisfies: SRG-APP-000125, SRG-APP-000356, SRG-APP-000358</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000439
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must protect the confidentiality and integrity of transmitted information during preparation for transmission and during reception using cryptographic mechanisms.
Medium Severity
<VulnDiscussion>Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. This requirement applies only to those applications that are either distributed or can allow access to data non-locally. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, applications need to leverage transmission protection mechanisms, such as TLS, TLS VPNs, or IPSEC. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. Satisfies: SRG-APP-000439, SRG-APP-000440, SRG-APP-000441, SRG-APP-000442</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000585
1 Rule
<GroupDescription></GroupDescription>
If cipher suites using pre-shared keys are used for device authentication, the ISEC7 EMM Suite must have a minimum security strength of 112 bits or higher, must only be used in networks where both the client and server are Government systems, must prohibit client negotiation to TLS 1.1, TLS 1.0, SSL 2.0, or SSL 3.0 and must prohibit or restrict the use of protocols that transmit unencrypted authentication information or use flawed cryptographic algorithm for transmission.
Medium Severity
<VulnDiscussion>Pre-shared keys are symmetric keys that are already in place prior to the initiation of a Transport Layer Security (TLS) session (e.g., as the result of a manual distribution). In general, pre-shared keys should not be used. However, the use of pre-shared keys may be appropriate for some closed environments that have stung key management best practices. Pre-shared keys may be appropriate for constrained environments with limited processing, memory, or power. If pre-shared keys are appropriate and supported, the following additional guidelines must be followed. Consult 800-52 for recommended pre-shared key cipher suites for pre-shared keys. Pre-shared keys must be distributed in a secure manner, such as a secure manual distribution or using a key establishment certificate. These cipher suites employ a pre-shared key for device authentication (for both the server and the client) and may also use RSA or ephemeral Diffie-Hellman (DHE) algorithms for key establishment. Because these cipher suites require pre-shared keys, these suites are not generally applicable to classic secure website applications and are not expected to be widely supported in TLS clients or TLS servers. NIST suggests that these suites be considered in particular for infrastructure applications, particularly if frequent authentication of the network entities is required. These cipher suites may be used with TLS versions 1.1 or 1.2. Note that cipher suites using GCM, SHA-256, or SHA-384 are only available in TLS 1.2. Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol. This requirement applies to Transport Layer Security (TLS) gateways (also known as Secure Sockets Layer [SSL] gateways), web servers, and web applications. Application protocols such as HTTPS and DNSSEC use TLS as the underlying security protocol and thus are in scope for this requirement. NIST SP 800-52 provides guidance for client negotiation, either on DoD-only or on public-facing servers. If unsecured protocols (lacking cryptographic mechanisms) are used for sessions, the contents of those sessions will be susceptible to manipulation, potentially allowing alteration and hijacking of maintenance sessions. Satisfies: SRG-APP-000585, SRG-APP-000590, SRG-APP-000560, SRG-APP-000645</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000630
1 Rule
<GroupDescription></GroupDescription>
The ISEC7 EMM Suite must use a FIPS-validated cryptographic module to provision digital signatures.
Medium Severity
<VulnDiscussion>Without confidentiality protection mechanisms, unauthorized individuals may gain access to sensitive information via a remote access session. FIPS 140-2 precludes the use of invalidated cryptography for the cryptographic protection of sensitive or valuable data within Federal systems. Unvalidated cryptography is viewed by NIST as providing no protection to the information or data. In effect, the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, then FIPS 140-2 is applicable. In essence, if cryptography is required, it must be validated. Cryptographic modules that have been approved for classified use may be used in lieu of modules that have been validated against the FIPS 140-2 standard. The cryptographic module used must have one FIPS-validated encryption algorithm (i.e., validated Advanced Encryption Standard [AES]). This validated algorithm must be used for encryption for cryptographic security function within the product being evaluated. EMM Suite is using the standard JCE module coming with OpenJDK 11 (included in installer) or Oracle JRE either legacy 1.8 or latest release (see https://openjdk.java.net/groups/security/). There are two module providers, IBM and RSA. The check/fix are written assuming the RSA module is used. Any FIPS 140-2 compliant JCE module (.jar) can be replaced and configured and used with EMM Suite. Satisfies: SRG-APP-000630, SRG-APP-000412, SRG-APP-000514</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-APP-000164
1 Rule
<GroupDescription></GroupDescription>
The Manager Web app password must be configured as follows: -15 or more characters -at least one lower case letter -at least one upper case letter -at least one number -at least one special character
Medium Severity
<VulnDiscussion>The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password. Satisfies: SRG-APP-000164, SRG-APP-000166, SRG-APP-000169</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>