Skip to content
Log In

III - Administrative Public

Rules and Groups employed by this XCCDF Profile

  • MFD/Printer Firewall/Router Rule Perimeter

    Group
    Show

  • A firewall or router rule must block all ingress and egress traffic from the enclave perimeter to the MFD or Network Printer.

    Access to the MFD or printer from outside the enclave network could lead to a denial of service caused by a large number of large print files being sent to the device. Ability for the MFD or printe...
    Rule Medium Severity
    Show

  • MFD Firmware

    Group
    Show

  • The MFD or Network Printer must employ the most current firmware available.

    MFD devices or printers utilizing old firmware can expose the network to known vulnerabilities leading to a denial of service or a compromise of sensitive data. While the MFD must use the most curr...
    Rule Medium Severity
    Show

  • MFD SNMP Community Strings

    Group
    Show

  • The default passwords and SNMP community strings of all management services have not been replaced with complex passwords.

    There are many known vulnerabilities in the SNMP protocol and if the default community strings and passwords are not modified an unauthorized individual could gain control of the MFD or printer. T...
    Rule High Severity
    Show

  • MFD Configuration State After Power Down or Reboot

    Group
    Show

  • The MFD or Network Printer must maintain configuration state (e.g., passwords, service settings) after a power down or restart.

    If the MFD does not maintain it state over a power down or restart, it will expose the network to all of the vulnerabilities that where mitigated by the modifications made to its configuration stat...
    Rule High Severity
    Show

  • MFD Management Protocols

    Group
    Show

  • Management protocols, with the exception of HTTPS and SNMPv3, must be disabled at all times except when necessary.

    Unneeded protocols expose the device and the network to unnecessary vulnerabilities.
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules