The Juniper router must be configured to protect against or limit the effects of denial-of-service (DoS) attacks by employing control plane protection.
An XCCDF Rule
Description
<VulnDiscussion>The Routing Engine (RE) is critical to all network operations because it is the component used to build all forwarding paths for the data plane via control plane processes. It is also instrumental with ongoing network management functions that keep the routers and links available for providing network services. Any disruption to the RE or the control and management planes can result in mission-critical network outages. A DoS attack targeting the RE can result in excessive CPU and memory utilization. To maintain network stability and RE security, the router must be able to handle specific control plane and management plane traffic that is destined to the RE. In the past, one method of filtering was to use ingress filters on forwarding interfaces to filter both forwarding path and receiving path traffic. However, this method does not scale well as the number of interfaces grows and the size of the ingress filters grows. Control plane policing increases the security of routers and multilayer switches by protecting the RE from unnecessary or malicious traffic. Filtering and rate limiting the traffic flow of control plane packets can be implemented to protect routers against reconnaissance and DoS attacks, allowing the control plane to maintain packet forwarding and protocol states despite an attack or heavy load on the router or multilayer switch.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-254031r844126_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Implement control plane protection by classifying traffic types based on importance and configure filters to restrict and rate limit the traffic directed to and processed by the RE according to each class.
set firewall family inet filter <name> term accept-tcp-initial from source-prefix-list management-networks-ipv4
set firewall family inet filter <name> term accept-tcp-initial from destination-prefix-list router-addresses-ipv4
set firewall family inet filter <name> term accept-tcp-initial from protocol tcp
set firewall family inet filter <name> term accept-tcp-initial from destination-port ssh