If IPv6 is not utilized on AIX server, the autoconf6 daemon must be disabled.
An XCCDF Rule
Description
<VulnDiscussion>"autoconf6" is used to automatically configure IPv6 interfaces at boot time. Running this service may allow other hosts on the same physical subnet to connect via IPv6, even when the network does not support it. Disable this unless you use IPv6 on the server.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-215357r513945_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
In "/etc/rc.tcpip", comment out the "autoconf6" entry by running command:
# chrctcp -d autoconf6