The SSMC web server must be configured to use a specified IP address and port.
An XCCDF Rule
Description
<VulnDiscussion>The web server must be configured to listen on a specified IP address and port. Without specifying an IP address and port for the web server to utilize, the web server will listen on all IP addresses available to the hosting server. If the web server has multiple IP addresses, i.e., a management IP address, the web server will also accept connections on the management IP address. Accessing the hosted application through an IP address normally used for nonapplication functions opens the possibility of user access to resources, utilities, files, ports, and protocols that are protected on the desired application IP address.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-255258r879588_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure SSMC web server to listen on a specified network IP address by doing the following:
1. Log on to ssmc appliance as ssmcadmin; escape to general bash shell.
2. Edit (using vi editor) file /ssmc/conf/security_config.properties and set the property ssmc.webserver.service.network=<interface_name>