Skip to content

The EDB Postgres Advanced Server must, by default, shut down upon audit failure, to include the unavailability of space for more audit log records; or must be configurable to shut down upon audit failure.

An XCCDF Rule

Description

<VulnDiscussion>It is critical that when the DBMS is at risk of failing to process audit logs as required, it take action to mitigate the failure. Audit processing failures include: software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode. When the need for system availability does not outweigh the need for a complete audit trail, the DBMS should shut down immediately, rolling back all in-flight transactions. Systems where audit trail completeness is paramount will most likely be at a lower MAC level than MAC I; the final determination is the prerogative of the application owner, subject to Authorizing Official concurrence. In any case, sufficient auditing resources must be allocated to avoid a shutdown in all but the most extreme situations.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-259226r938731_rule
Severity
Medium
References
Updated



Remediation - Manual Procedure

Modify DBMS, OS, or third-party logging application settings to alert appropriate personnel when a specific percentage of log storage capacity is reached.

If PEM is in use, it may be configured to issue an alert, send an email to designated personnel, and shut down the EDB Postgres Advanced Server instance when the audit log mount point is at 99 percent full. Refer to the Supplemental Procedures document supplied with this STIG for guidance on configuring PEM alerts.