The Cisco multicast Designated switch (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization.
An XCCDF Rule
Description
<VulnDiscussion>Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (i.e., someone doing a file download here or there), whereas multicast can have broader impact on bandwidth consumption, resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups hosts are allowed to join via IGMP or MLD.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-221139r856653_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Step 1: Configure the report policy to filter IGMP Membership Report messages as shown in the example below:
SW1(config-route-map)# route-map ALLOWED_SOURCES permit 10
SW1(config-route-map)# match ip multicast source x.1.2.6/32
SW1(config-route-map)# route-map ALLOWED_SOURCES permit 20
SW1(config-route-map)# match ip multicast source x.1.2.7/32