The Cisco switch must be configured to generate an alert for all audit failure events.
An XCCDF Rule
Description
<VulnDiscussion>It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-220497r879733_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure the Cisco switch to send critical to emergency log messages to the syslog server as shown in the example below:
SW4(config)# logging server 10.1.48.10 2
Note: The parameter 2 (critical) can replaced with a lesser severity level 3 through 6 (i.e. error, warning, notice, informational).