Skip to content
Catalogs
XCCDF
Cisco ISE NAC Security Technical Implementation Guide
SRG-NET-000015-NAC-000070
The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used. This is required for compliance with C2C Step 3.
The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used. This is required for compliance with C2C Step 3. An XCCDF Rule
The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used. This is required for compliance with C2C Step 3.
Low Severity
<VulnDiscussion>Notification will let the user know that installation is in progress and may take a while. This notice may deter the user from disconnecting and retrying the connection before the remediation is completed. Premature disconnections may increase network demand and frustrate the user.
Note: This policy does not require remediation to be performed by the Cisco ISE, but will apply if remediation services are used.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>