The Cisco switch must be configured to use at least two authentication servers to authenticate users prior to granting administrative access.
An XCCDF Rule
Description
<VulnDiscussion>Centralized management of user accounts and authentication increases the administrative access to the switch. This control is particularly important protection against the insider threat. With robust centralized management, audit records for administrator account access to the organization's network devices can be more readily analyzed for trends and anomalies. The alternative method of defining administrator accounts on each device exposes the device configuration to remote access authentication attacks and system administrators with multiple authenticators for each network device.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-220617r939989_rule
- Severity
- High
- References
- Updated
Remediation - Manual Procedure
Step 1: Configure the Cisco switch to use at least two authentication servers as shown in the example below:
SW4(config)#radius host 10.1.48.2 key xxxxxx
SW4(config)#radius host 10.1.48.3 key xxxxxx
Step 2: Configure the authentication order to use the authentication servers as the primary source for authentication as shown in the example below: