Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
APACHE 2.2 Server for UNIX Security Technical Implementation Guide
WA000-WWA030
The httpd.conf MaxSpareServers directive must be set properly.
The httpd.conf MaxSpareServers directive must be set properly.
An XCCDF Rule
Details
Profiles
Prose
The httpd.conf MaxSpareServers directive must be set properly.
Low Severity
<VulnDiscussion>These requirements are set to mitigate the effects of several types of denial of service attacks. Although there is some latitude concerning the settings themselves, the requirements attempt to provide reasonable limits for the protection of the web server. If necessary, these limits can be adjusted to accommodate the operational requirement of a given system. From Apache.org:The MaxSpareServers directive sets the desired maximum number of idle child server processes. An idle process is one which is not handling a request. If there are more than MaxSpareServers idle, then the parent process will kill off the excess processes. Tuning of this parameter should only be necessary on very busy sites. Setting this parameter to a large number is almost always a bad idea. If you are trying to set the value equal to or lower than MinSpareServers, Apache will automatically adjust it to MinSpareServers + 1.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility>Web Administrator</Responsibility><IAControls></IAControls>