The TPS must generate a log record so an alert can be configured to, at a minimum, the system administrator when malicious code is detected.
An XCCDF Rule
Description
<VulnDiscussion>Without an alert, security personnel may be unaware of an impending failure of the audit capability, and the ability to perform forensic analysis and detect rate-based and other anomalies will be impeded. The TPS generates an immediate (within seconds) alert which notifies designated personnel of the incident. Sending a message to an unattended log or console does not meet this requirement since that will not be seen immediately. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. Satisfies: SRG-NET-000248-IDPS-00206, SRG-NET-000249-IDPS-00222, SRG-NET-000385-IDPS-00210</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-242199r754438_rule
- Severity
- High
- References
- Updated
Remediation - Manual Procedure
1. In the Trend Micro SMS, navigate to "Profiles" and "Shared Settings".
2. Under "Action Sets:
a. Select "Block+Notify" and edit.
b. Select Notifications, and check "Remote Syslog".
c. Select "Finish".