Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
SDN Using NV Security Technical Implementation Guide
NET-SDN-021
NET-SDN-021
An XCCDF Group - A logical subset of the XCCDF Benchmark
Details
Profiles
Prose
NET-SDN-021
1 Rule
<GroupDescription></GroupDescription>
Virtual Extensible Local Area Network (VXLAN) identifiers must be mapped to the appropriate VLAN identifiers.
Medium Severity
<VulnDiscussion>VXLAN is a Layer 2 network that overlays a Layer 3 network; that is, it creates a Layer 2 adjacency across a routed IP fabric. Each Layer 2 overlay network is known as a VXLAN segment and is identified by a unique segment ID called a VXLAN Network Identifier (VNI). The VXLAN network enables virtual machines with the same VNI deployed on different hosts to communicate with each other. Virtual machines are identified uniquely by the combination of the MAC addresses of their virtual network interface card (NIC) and VNI. Hence, it is possible to have duplicate MAC addresses within the SDN infrastructure while in different VXLAN segments. Within the VXLAN architecture, virtual tunnel endpoints (VTEPs) perform the encapsulation and de-encapsulation of the layer-2 traffic. The VXLAN segments are independent of the underlying network topology; conversely, the underlying IP network between VTEPs is independent of the VXLAN overlay. It routes the encapsulated packets based on the outer IP address header, which has the initiating VTEP as the source IP address and the terminating VTEP as the destination IP address. VTEP-enabled switches will determine the VNI to insert into the VXLAN header based on the 802.1Q VLAN tag of each frame received from the hypervisor host connected via trunk link or the VLAN assignment of an access switchport. The mapping of VLAN to VNI is configured on the switch. Since the VNI is used to segregate all Layer 2 domains, the correct mapping is critical to ensure all traffic for each Layer 2 domain within the SDN infrastructure is forwarded correctly and that broadcast and multicast traffic does not leak into the wrong domain.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>