Riverbed Optimization System (RiOS) must alert the ISSO and SA (at a minimum) in the event of an audit processing failure.
An XCCDF Rule
Description
<VulnDiscussion>It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-77407r1_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure RiOS to use automated mechanisms to alert security personnel to threats identified by authoritative sources.
Navigate to the device Management Console
Navigate to Configure >> System Settings >> SNMP Basic
Click "Add a New Trap Receiver"
Set "Receiver IP Address" to the address of the trap receiver