Skip to content

The Riverbed NetProfiler must be configured to terminate all network connections associated with a device management session at the end of the session, or the session must be terminated after 10 minutes of inactivity except to fulfill documented and validated mission requirements.

An XCCDF Rule

Description

<VulnDiscussion>Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level or deallocating networking assignments at the application level if multiple application sessions are using a single, operating system-level network connection. This does not mean the device terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-256084r882760_rule
Severity
High
References
Updated



Remediation - Manual Procedure

Go to Configuration >> Appliance Security >> Password Security. 

Under "Inactivity Timeout", check the "Enable Maximum Inactivity Timeout" box and set the timer for 10 minutes.