Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
An XCCDF Rule
Description
To set the runtime status of the net.ipv6.conf.default.accept_source_route
kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0To make sure that the setting is persistent, add the following line to a file in the directory
/etc/sysctl.d
: net.ipv6.conf.default.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
- ID
- xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
- Severity
- Medium
- References
- Updated
Remediation - Ansible
- name: List /etc/sysctl.d/*.conf files
find:
paths:
- /etc/sysctl.d/
- /run/sysctl.d/
- /usr/local/lib/sysctl.d/