Skip to content

Motorola Solutions Android 11 must be configured to not allow more than ten consecutive failed authentication attempts.

An XCCDF Rule

Description

<VulnDiscussion>The more attempts an adversary has to guess a password, the more likely the adversary will enter the correct password and gain access to resources on the device. Setting a limit on the number of attempts mitigates this risk. Setting the limit at 10 or less gives authorized users the ability to make a few mistakes when entering the password, but still provides adequate protection against dictionary or brute force attacks on the password. SFR ID: FMT_SMF_EXT.1.1 #2c, FIA_AFL_EXT.1.5</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-251082r803895_rule
Severity
Low
References
Updated



Remediation - Manual Procedure

Configure the Motorola Solutions Android 11 device to allow only ten or fewer consecutive failed authentication attempts.

On the EMM Console:
1. Open "Lock screen restrictions".
2. Select "Personal Profile".
3. Set "Max password failures for local wipe" to a number between 1 and 10.