The Juniper SRX Services Gateway must terminate the console session when the serial cable connected to the console port is unplugged.
An XCCDF Rule
Description
<VulnDiscussion>If a device management session or connection remains open after management is completed, it may be hijacked by an attacker and used to compromise or damage the network device.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-223230r513379_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure this setting by entering the following commands in configuration mode.
[edit]
system ports console set log-out-on-disconnect