The Juniper Multicast Source Discovery Protocol (MSDP) router must be configured to filter source-active multicast advertisements to external MSDP peers to avoid global visibility of local-only multicast sources and groups.
An XCCDF Rule
Description
<VulnDiscussion>To avoid global visibility of local information, there are a number of source-group (S, G) states in a PIM-SM domain that must not be leaked to another domain, such as multicast sources with private address, administratively scoped multicast addresses, and the auto-RP groups (224.0.1.39 and 224.0.1.40). Allowing a multicast distribution tree, local to the core, to extend beyond its boundary could enable local multicast traffic to leak into other autonomous systems and customer networks.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-217096r819169_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure the router with an export policy avoid global visibility of local multicast (S, G) states. The example below will avoid exporting multicast active sources belonging to the private network.
[edit policy-options]
set policy-statement SA_EXPORT term INTERNAL_GROUP from route-filter 239.0.0.0/8 orlonger
set policy-statement SA_EXPORT term INTERNAL_GROUP then reject
set policy-statement SA_EXPORT term INTERNAL_ADDR from source-address-filter 10.0.0.0/8 orlonger