JBoss must be configured to use an approved cryptographic algorithm in conjunction with TLS.
An XCCDF Rule
Description
<VulnDiscussion>Preventing the disclosure or modification of transmitted information requires that application servers take measures to employ approved cryptography in order to protect the information during transmission over the network. This is usually achieved through the use of Transport Layer Security (TLS), SSL VPN, or IPSec tunnel. If data in transit is unencrypted, it is vulnerable to disclosure and modification. If approved cryptographic algorithms are not used, encryption strength cannot be assured. FIPS 140-2 approved TLS versions include TLS V1.2 or greater. TLS must be enabled, and non-FIPS-approved SSL versions must be disabled. NIST SP 800-52 specifies the preferred configurations for government systems.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-213548r615939_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Reference section 4.6 of the JBoss EAP 6.3 Security Guide located on the Red Hat vendor's website for step-by-step instructions on establishing SSL encryption on JBoss.
The overall steps include:
1. Add an HTTPS connector.
2. Configure the SSL encryption certificate and keys.