Skip to content

The MQ Appliance network device must activate a system alert message, send an alarm, and/or automatically shut down when a component failure is detected.

An XCCDF Rule

Description

<VulnDiscussion>Predictable failure prevention requires organizational planning to address device failure issues. If components key to maintaining the device's security fail to function, the device could continue operating in an insecure state. If appropriate actions are not taken when an MQ Appliance network device failure occurs, a denial of service condition may occur, which could result in mission failure since the network would be operating without a critical security monitoring and prevention function. Upon detecting a failure of MQ Appliance network device security components, the MQ Appliance network device must activate a system alert message, send an alarm, or shut down. With failure notification enabled, an error report can be sent to a designated recipient or uploaded to a specific location after the appliance returns to service from an unscheduled outage. This error report can contain diagnostic details. Intrusion detection will provide a warning and restart in Fail-Safe mode. (See https://ibm.biz/Bd4NJ5)</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-89657r1_rule
Severity
Medium
References
Updated



Remediation - Manual Procedure

Log on to the MQ Appliance CLI as a privileged user. 

Enter: 
co 
failure-notification 
admin-state enabled