The CIM service must use DoD-approved encryption.
An XCCDF Rule
Description
<VulnDiscussion>Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered. Facilitating the confidentiality and integrity of transmitted information requires the operating system to take measures in preparing information for transmission. This can be accomplished via encryption. This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and DoD data may be compromised.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-237817r647904_rule
- Severity
- High
- References
- Updated
Remediation - Manual Procedure
Disable unsecured CIM ports and enable secured CIM ports with the following command:
cli% setcim -http disable -https enable
Confirm the operation with "y"