Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Resources
Documents
Publishers
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
HP FlexFabric Switch L2S Security Technical Implementation Guide
SRG-NET-000362-L2S-000024
The HP FlexFabric Switch must have unknown storm-constrain enabled.
The HP FlexFabric Switch must have unknown storm-constrain enabled.
An XCCDF Rule
Details
Profiles
Prose
The HP FlexFabric Switch must have unknown storm-constrain enabled.
Medium Severity
<VulnDiscussion>Access layer switches use the Content Addressable Memory (CAM) table to direct traffic to specific ports based on the VLAN number and the destination MAC address of the frame. When a router has an ARP entry for a destination host and forwards it to the access layer switch and there is no entry corresponding to the frame's destination MAC address in the incoming VLAN, the frame will be sent to all forwarding ports within the respective VLAN, which causes flooding. Large amounts of flooded traffic can saturate low-bandwidth links, causing network performance issues or complete connectivity outage to the connected devices. Unknown unicast flooding has been a nagging problem in networks that have asymmetric routing and default timers. To mitigate the risk of a connectivity outage, the storm-constrain feature must be implemented on all access layer switches. The storm-constrain feature will block unknown unicast traffic flooding and only permit egress traffic with MAC addresses that are known to exit on the port.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>