Message size restrictions must be controlled on Send connectors.
An XCCDF Rule
Description
<VulnDiscussion>Email system availability depends in part on best practices strategies for setting tuning configurations. For message size restrictions, multiple places exist to set or override inbound or outbound message size. Failure to control the configuration strategy can result in loss of data or system availability. This setting enables the administrator to control the maximum message size on a send connector. Using connectors to control size limits may necessitate the need to apply message size limitations in multiple places, with the potential of introducing conflicts and impediments in the mail flow. Changing this setting at the connector overrides the global one. Therefore, if operational needs require it, the connector value may be set lower than that of the global value with the rationale and documented in the EDSP.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-44007r3_rule
- Severity
- Low
- Updated
Remediation - Manual Procedure
Open the Exchange Management Shell and enter the following command:
Set-SendConnector -Identity <'SendConnector'> -MaxMessageSize <MaxSendSize>
If an alternate value is desired from the global value MaxSendSize, obtain signoff with risk acceptance and document in the EDSP.