The DBN-6300 must produce audit records containing information to establish when (date and time) the events occurred.
An XCCDF Rule
Description
<VulnDiscussion>It is essential for security personnel to know what is being done, what was attempted, where it was done, when it was done, and by whom it was done in order to compile an accurate risk assessment. Logging the date and time of each detected event provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured network device. In order to establish and correlate the series of events leading up to an outage or attack, it is imperative the date and time are recorded in all log records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-91631r1_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure the DBN-6300 to be connected to the syslog server. Also configure the DBN-6300 to include audit records in the syslog message feed.
Navigate to Settings >> Advanced >> Syslog.
Enter the syslog connection information (port and IP address) and push the "enabled" button for both "TCP" and "enable".