The Arista Multilayer Switch must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device.
An XCCDF Rule
Description
<VulnDiscussion>Display of the DoD-approved use notification before granting access to the network device ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-75299r1_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure the switch to display the Standard DoD Notice and Consent banner.
To configure the banner, enter the following commands from the configuration mode interface. Replace the bracketed data with the DoD Banner.
switch(config)#banner login
[DoD Banner]