Kona Site Defender must immediately use updates made to policy enforcement mechanisms to allow traffic from organizationally defined IP addresses (i.e., IP whitelist).
An XCCDF Rule
Description
<VulnDiscussion>Information flow policies regarding dynamic information flow control include, for example, allowing or disallowing information flows based on changes to the PPSM CAL, vulnerability assessments, or mission conditions. Changing conditions include changes in the threat environment and detection of potentially harmful or adverse events. Changes to the ALG must take effect when made by an authorized administrator and the new configuration is put in place or committed, including upon restart of the application or reboot of the system. With some devices, the changes take effect as the configuration is changed, while with others, the new configuration must be submitted to the device. In any case, the behavior of the ALG must immediately be affected to reflect the configuration change.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-91095r1_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure the Kona Site Defender to allow traffic for organizationally defined IP addresses:
1. Log in to the Akamai Luna Portal (https://control.akamai.com).
2. Click the "Configure" tab.
3. Under the "Security" section, select "Security Configuration".
4. If prompted for which product to use, select "Site Defender" and then "Continue".