Do not allow users to reuse recent passwords. This can be accomplished by using the
remember option for the pam_unix or pam_pwhistory PAM modules.
warning alert:
Warning
If the system relies on authselect tool to manage PAM settings, the remediation
will also use authselect tool. However, if any manual modification was made in
PAM files, the authselect integrity check will fail and the remediation will be
aborted in order to preserve intentional changes. In this case, an informative message will
be shown in the remediation report.
warning alert:
Warning
Newer versions of authselect contain an authselect feature to easily and properly
enable pam_pwhistory.so module. If this feature is not yet available in your
system, an authselect custom profile must be used to avoid integrity issues in PAM files.
Rationale
Preventing re-use of previous passwords helps ensure that a compromised password is not
re-used by a user.
ISA-62443-2-1-2009, Security for Industrial Automation and Control Systems Part 2-1: Establishing an Industrial Automation and Control Systems Security Program
- name: Gather the package facts
package_facts:
manager: auto
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
set_fact:
var_password_pam_unix_remember: !!str <xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_var_password_pam_unix_remember" use="legacy"/>
tags:
- always
- name: Limit Password Reuse - Check if system relies on authselect tool
ansible.builtin.stat:
path: /usr/bin/authselect
register: result_authselect_present
when: '"pam" in ansible_facts.packages'
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - Collect the available authselect features
ansible.builtin.command:
cmd: authselect list-features minimal
register: result_authselect_available_features
changed_when: false
when:
- '"pam" in ansible_facts.packages'
- result_authselect_present.stat.exists
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - Enable pam_pwhistory.so using authselect feature
block:
- name: Limit Password Reuse - Check integrity of authselect current profile
ansible.builtin.command:
cmd: authselect check
register: result_authselect_check_cmd
changed_when: false
failed_when: false
- name: Limit Password Reuse - Informative message based on the authselect integrity
check result
ansible.builtin.assert:
that:
- result_authselect_check_cmd.rc == 0
fail_msg:
- authselect integrity check failed. Remediation aborted!
- This remediation could not be applied because an authselect profile was not
selected or the selected profile is not intact.
- It is not recommended to manually edit the PAM files when authselect tool
is available.
- In cases where the default authselect profile does not cover a specific demand,
a custom authselect profile is recommended.
success_msg:
- authselect integrity check passed
- name: Limit Password Reuse - Get authselect current features
ansible.builtin.shell:
cmd: authselect current | tail -n+3 | awk '{ print $2 }'
register: result_authselect_features
changed_when: false
when:
- result_authselect_check_cmd is success
- name: Limit Password Reuse - Ensure "with-pwhistory" feature is enabled using
authselect tool
ansible.builtin.command:
cmd: authselect enable-feature with-pwhistory
register: result_authselect_enable_feature_cmd
when:
- result_authselect_check_cmd is success
- result_authselect_features.stdout is not search("with-pwhistory")
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b
when:
- result_authselect_enable_feature_cmd is not skipped
- result_authselect_enable_feature_cmd is success
when:
- '"pam" in ansible_facts.packages'
- result_authselect_present.stat.exists
- result_authselect_available_features.stdout is search("with-pwhistory")
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - Enable pam_pwhistory.so in appropriate PAM files
block:
- name: Limit Password Reuse - Define the PAM file to be edited as a local fact
ansible.builtin.set_fact:
pam_file_path: /etc/pam.d/system-auth
- name: Limit Password Reuse - Check if system relies on authselect tool
ansible.builtin.stat:
path: /usr/bin/authselect
register: result_authselect_present
- name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
is present
block:
- name: Limit Password Reuse - Check integrity of authselect current profile
ansible.builtin.command:
cmd: authselect check
register: result_authselect_check_cmd
changed_when: false
failed_when: false
- name: Limit Password Reuse - Informative message based on the authselect integrity
check result
ansible.builtin.assert:
that:
- result_authselect_check_cmd.rc == 0
fail_msg:
- authselect integrity check failed. Remediation aborted!
- This remediation could not be applied because an authselect profile was
not selected or the selected profile is not intact.
- It is not recommended to manually edit the PAM files when authselect tool
is available.
- In cases where the default authselect profile does not cover a specific
demand, a custom authselect profile is recommended.
success_msg:
- authselect integrity check passed
- name: Limit Password Reuse - Get authselect current profile
ansible.builtin.shell:
cmd: authselect current -r | awk '{ print $1 }'
register: result_authselect_profile
changed_when: false
when:
- result_authselect_check_cmd is success
- name: Limit Password Reuse - Define the current authselect profile as a local
fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is match("custom/")
- name: Limit Password Reuse - Define the new authselect custom profile as a local
fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: custom/hardening
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is not match("custom/")
- name: Limit Password Reuse - Get authselect current features to also enable
them in the custom profile
ansible.builtin.shell:
cmd: authselect current | tail -n+3 | awk '{ print $2 }'
register: result_authselect_features
changed_when: false
when:
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Check if any custom profile with the same name
was already created
ansible.builtin.stat:
path: /etc/authselect/{{ authselect_custom_profile }}
register: result_authselect_custom_profile_present
changed_when: false
when:
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Create an authselect custom profile based on the
current profile
ansible.builtin.command:
cmd: authselect create-profile hardening -b {{ authselect_current_profile
}}
when:
- result_authselect_check_cmd is success
- authselect_current_profile is not match("custom/")
- not result_authselect_custom_profile_present.stat.exists
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Ensure the authselect custom profile is selected
ansible.builtin.command:
cmd: authselect select {{ authselect_custom_profile }}
register: result_pam_authselect_select_profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Restore the authselect features in the custom profile
ansible.builtin.command:
cmd: authselect enable-feature {{ item }}
loop: '{{ result_authselect_features.stdout_lines }}'
register: result_pam_authselect_restore_features
when:
- result_authselect_profile is not skipped
- result_authselect_features is not skipped
- result_pam_authselect_select_profile is not skipped
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- result_pam_authselect_restore_features is not skipped
- name: Limit Password Reuse - Change the PAM file to be edited according to the
custom authselect profile
ansible.builtin.set_fact:
pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
| basename }}
when:
- result_authselect_present.stat.exists
- name: Limit Password Reuse - Check if expected PAM module line is present in {{
pam_file_path }}
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*
state: absent
check_mode: true
changed_when: false
register: result_pam_line_present
- name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
}}
block:
- name: Limit Password Reuse - Check if required PAM module line is present in
{{ pam_file_path }} with different control
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
state: absent
check_mode: true
changed_when: false
register: result_pam_line_other_control_present
- name: Limit Password Reuse - Ensure the correct control for the required PAM
module line in {{ pam_file_path }}
ansible.builtin.replace:
dest: '{{ pam_file_path }}'
regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
replace: \1requisite \2
register: result_pam_module_edit
when:
- result_pam_line_other_control_present.found == 1
- name: Limit Password Reuse - Ensure the required PAM module line is included
in {{ pam_file_path }}
ansible.builtin.lineinfile:
dest: '{{ pam_file_path }}'
insertafter: ^password.*requisite.*pam_pwquality\.so
line: password requisite pam_pwhistory.so
register: result_pam_module_add
when:
- result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
> 1
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b
when:
- result_authselect_present is defined
- result_authselect_present.stat.exists
- |-
(result_pam_module_add is defined and result_pam_module_add.changed)
or (result_pam_module_edit is defined and result_pam_module_edit.changed)
when:
- result_pam_line_present.found is defined
- result_pam_line_present.found == 0
when:
- '"pam" in ansible_facts.packages'
- |
(result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - Check the presence of /etc/security/pwhistory.conf
file
ansible.builtin.stat:
path: /etc/security/pwhistory.conf
register: result_pwhistory_conf_check
when: '"pam" in ansible_facts.packages'
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in /etc/security/pwhistory.conf
file
block:
- name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter in
/etc/security/pwhistory.conf
ansible.builtin.lineinfile:
path: /etc/security/pwhistory.conf
regexp: ^\s*remember\s*=
line: remember = {{ var_password_pam_unix_remember }}
state: present
- name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter is
removed from PAM files
block:
- name: Limit Password Reuse - Check if /etc/pam.d/system-auth file is present
ansible.builtin.stat:
path: /etc/pam.d/system-auth
register: result_pam_file_present
- name: Limit Password Reuse - Check the proper remediation for the system
block:
- name: Limit Password Reuse - Define the PAM file to be edited as a local fact
ansible.builtin.set_fact:
pam_file_path: /etc/pam.d/system-auth
- name: Limit Password Reuse - Check if system relies on authselect tool
ansible.builtin.stat:
path: /usr/bin/authselect
register: result_authselect_present
- name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
is present
block:
- name: Limit Password Reuse - Check integrity of authselect current profile
ansible.builtin.command:
cmd: authselect check
register: result_authselect_check_cmd
changed_when: false
failed_when: false
- name: Limit Password Reuse - Informative message based on the authselect
integrity check result
ansible.builtin.assert:
that:
- result_authselect_check_cmd.rc == 0
fail_msg:
- authselect integrity check failed. Remediation aborted!
- This remediation could not be applied because an authselect profile
was not selected or the selected profile is not intact.
- It is not recommended to manually edit the PAM files when authselect
tool is available.
- In cases where the default authselect profile does not cover a specific
demand, a custom authselect profile is recommended.
success_msg:
- authselect integrity check passed
- name: Limit Password Reuse - Get authselect current profile
ansible.builtin.shell:
cmd: authselect current -r | awk '{ print $1 }'
register: result_authselect_profile
changed_when: false
when:
- result_authselect_check_cmd is success
- name: Limit Password Reuse - Define the current authselect profile as a
local fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is match("custom/")
- name: Limit Password Reuse - Define the new authselect custom profile as
a local fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: custom/hardening
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is not match("custom/")
- name: Limit Password Reuse - Get authselect current features to also enable
them in the custom profile
ansible.builtin.shell:
cmd: authselect current | tail -n+3 | awk '{ print $2 }'
register: result_authselect_features
changed_when: false
when:
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Check if any custom profile with the same name
was already created
ansible.builtin.stat:
path: /etc/authselect/{{ authselect_custom_profile }}
register: result_authselect_custom_profile_present
changed_when: false
when:
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Create an authselect custom profile based on
the current profile
ansible.builtin.command:
cmd: authselect create-profile hardening -b {{ authselect_current_profile
}}
when:
- result_authselect_check_cmd is success
- authselect_current_profile is not match("custom/")
- not result_authselect_custom_profile_present.stat.exists
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Ensure the authselect custom profile is selected
ansible.builtin.command:
cmd: authselect select {{ authselect_custom_profile }}
register: result_pam_authselect_select_profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Restore the authselect features in the custom
profile
ansible.builtin.command:
cmd: authselect enable-feature {{ item }}
loop: '{{ result_authselect_features.stdout_lines }}'
register: result_pam_authselect_restore_features
when:
- result_authselect_profile is not skipped
- result_authselect_features is not skipped
- result_pam_authselect_select_profile is not skipped
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- result_pam_authselect_restore_features is not skipped
- name: Limit Password Reuse - Change the PAM file to be edited according
to the custom authselect profile
ansible.builtin.set_fact:
pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
| basename }}
when:
- result_authselect_present.stat.exists
- name: Limit Password Reuse - Ensure the "remember" option from "pam_pwhistory.so"
is not present in {{ pam_file_path }}
ansible.builtin.replace:
dest: '{{ pam_file_path }}'
regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
replace: \1\2
register: result_pam_option_removal
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b
when:
- result_authselect_present.stat.exists
- result_pam_option_removal is changed
when:
- result_pam_file_present.stat.exists
when:
- '"pam" in ansible_facts.packages'
- result_pwhistory_conf_check.stat.exists
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in PAM files
block:
- name: Limit Password Reuse - Define the PAM file to be edited as a local fact
ansible.builtin.set_fact:
pam_file_path: /etc/pam.d/system-auth
- name: Limit Password Reuse - Check if system relies on authselect tool
ansible.builtin.stat:
path: /usr/bin/authselect
register: result_authselect_present
- name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
is present
block:
- name: Limit Password Reuse - Check integrity of authselect current profile
ansible.builtin.command:
cmd: authselect check
register: result_authselect_check_cmd
changed_when: false
failed_when: false
- name: Limit Password Reuse - Informative message based on the authselect integrity
check result
ansible.builtin.assert:
that:
- result_authselect_check_cmd.rc == 0
fail_msg:
- authselect integrity check failed. Remediation aborted!
- This remediation could not be applied because an authselect profile was
not selected or the selected profile is not intact.
- It is not recommended to manually edit the PAM files when authselect tool
is available.
- In cases where the default authselect profile does not cover a specific
demand, a custom authselect profile is recommended.
success_msg:
- authselect integrity check passed
- name: Limit Password Reuse - Get authselect current profile
ansible.builtin.shell:
cmd: authselect current -r | awk '{ print $1 }'
register: result_authselect_profile
changed_when: false
when:
- result_authselect_check_cmd is success
- name: Limit Password Reuse - Define the current authselect profile as a local
fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is match("custom/")
- name: Limit Password Reuse - Define the new authselect custom profile as a local
fact
ansible.builtin.set_fact:
authselect_current_profile: '{{ result_authselect_profile.stdout }}'
authselect_custom_profile: custom/hardening
when:
- result_authselect_profile is not skipped
- result_authselect_profile.stdout is not match("custom/")
- name: Limit Password Reuse - Get authselect current features to also enable
them in the custom profile
ansible.builtin.shell:
cmd: authselect current | tail -n+3 | awk '{ print $2 }'
register: result_authselect_features
changed_when: false
when:
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Check if any custom profile with the same name
was already created
ansible.builtin.stat:
path: /etc/authselect/{{ authselect_custom_profile }}
register: result_authselect_custom_profile_present
changed_when: false
when:
- authselect_current_profile is not match("custom/")
- name: Limit Password Reuse - Create an authselect custom profile based on the
current profile
ansible.builtin.command:
cmd: authselect create-profile hardening -b {{ authselect_current_profile
}}
when:
- result_authselect_check_cmd is success
- authselect_current_profile is not match("custom/")
- not result_authselect_custom_profile_present.stat.exists
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Ensure the authselect custom profile is selected
ansible.builtin.command:
cmd: authselect select {{ authselect_custom_profile }}
register: result_pam_authselect_select_profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- authselect_current_profile is not match("custom/")
- authselect_custom_profile is not match(authselect_current_profile)
- name: Limit Password Reuse - Restore the authselect features in the custom profile
ansible.builtin.command:
cmd: authselect enable-feature {{ item }}
loop: '{{ result_authselect_features.stdout_lines }}'
register: result_pam_authselect_restore_features
when:
- result_authselect_profile is not skipped
- result_authselect_features is not skipped
- result_pam_authselect_select_profile is not skipped
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
when:
- result_authselect_check_cmd is success
- result_authselect_profile is not skipped
- result_pam_authselect_restore_features is not skipped
- name: Limit Password Reuse - Change the PAM file to be edited according to the
custom authselect profile
ansible.builtin.set_fact:
pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
| basename }}
when:
- result_authselect_present.stat.exists
- name: Limit Password Reuse - Check if expected PAM module line is present in {{
pam_file_path }}
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*
state: absent
check_mode: true
changed_when: false
register: result_pam_line_present
- name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
}}
block:
- name: Limit Password Reuse - Check if required PAM module line is present in
{{ pam_file_path }} with different control
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
state: absent
check_mode: true
changed_when: false
register: result_pam_line_other_control_present
- name: Limit Password Reuse - Ensure the correct control for the required PAM
module line in {{ pam_file_path }}
ansible.builtin.replace:
dest: '{{ pam_file_path }}'
regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
replace: \1requisite \2
register: result_pam_module_edit
when:
- result_pam_line_other_control_present.found == 1
- name: Limit Password Reuse - Ensure the required PAM module line is included
in {{ pam_file_path }}
ansible.builtin.lineinfile:
dest: '{{ pam_file_path }}'
line: password requisite pam_pwhistory.so
register: result_pam_module_add
when:
- result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
> 1
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b
when:
- result_authselect_present is defined
- result_authselect_present.stat.exists
- |-
(result_pam_module_add is defined and result_pam_module_add.changed)
or (result_pam_module_edit is defined and result_pam_module_edit.changed)
when:
- result_pam_line_present.found is defined
- result_pam_line_present.found == 0
- name: Limit Password Reuse - Check if the required PAM module option is present
in {{ pam_file_path }}
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*\sremember\b
state: absent
check_mode: true
changed_when: false
register: result_pam_module_remember_option_present
- name: Limit Password Reuse - Ensure the "remember" PAM option for "pam_pwhistory.so"
is included in {{ pam_file_path }}
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
backrefs: true
regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so.*)
line: \1 remember={{ var_password_pam_unix_remember }}
state: present
register: result_pam_remember_add
when:
- result_pam_module_remember_option_present.found == 0
- name: Limit Password Reuse - Ensure the required value for "remember" PAM option
from "pam_pwhistory.so" in {{ pam_file_path }}
ansible.builtin.lineinfile:
path: '{{ pam_file_path }}'
backrefs: true
regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
line: \1\2={{ var_password_pam_unix_remember }} \3
register: result_pam_remember_edit
when:
- result_pam_module_remember_option_present.found > 0
- name: Limit Password Reuse - Ensure authselect changes are applied
ansible.builtin.command:
cmd: authselect apply-changes -b
when:
- result_authselect_present.stat.exists
- (result_pam_remember_add is defined and result_pam_remember_add.changed) or
(result_pam_remember_edit is defined and result_pam_remember_edit.changed)
when:
- '"pam" in ansible_facts.packages'
- not result_pwhistory_conf_check.stat.exists
tags:
- CCE-83584-3
- CJIS-5.6.2.1.1
- NIST-800-171-3.5.8
- NIST-800-53-IA-5(1)(e)
- NIST-800-53-IA-5(f)
- PCI-DSS-Req-8.2.5
- PCI-DSSv4-8.3.7
- accounts_password_pam_unix_remember
- configure_strategy
- low_complexity
- medium_disruption
- medium_severity
- no_reboot_needed
Remediation - Shell Script
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then
var_password_pam_unix_remember='<xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_var_password_pam_unix_remember" use="legacy"/>'
if [ -f /usr/bin/authselect ]; then
if authselect list-features minimal | grep -q with-pwhistory; then
if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-pwhistory
authselect apply-changes -b
else
if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
# If not already in use, a custom profile is created preserving the enabled features.
if [[ ! $CURRENT_PROFILE == custom/* ]]; then
ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
authselect create-profile hardening -b $CURRENT_PROFILE
CURRENT_PROFILE="custom/hardening"
authselect apply-changes -b --backup=before-hardening-custom-profile
authselect select $CURRENT_PROFILE
for feature in $ENABLED_FEATURES; do
authselect enable-feature $feature;
done
authselect apply-changes -b --backup=after-hardening-custom-profile
fi
PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"
authselect apply-changes -b
if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
# Line matching group + control + module was not found. Check group + module.
if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
# The control is updated only if one single line matches.
sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
else
LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
if [ ! -z $LAST_MATCH_LINE ]; then
sed -i --follow-symlinks $LAST_MATCH_LINE' a password '"requisite"' pam_pwhistory.so' "$PAM_FILE_PATH"
else
echo 'password '"requisite"' pam_pwhistory.so' >> "$PAM_FILE_PATH"
fi
fi
fi
fi
else
if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/system-auth"; then
# Line matching group + control + module was not found. Check group + module.
if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
# The control is updated only if one single line matches.
sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "/etc/pam.d/system-auth"
else
LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
if [ ! -z $LAST_MATCH_LINE ]; then
sed -i --follow-symlinks $LAST_MATCH_LINE' a password '"requisite"' pam_pwhistory.so' "/etc/pam.d/system-auth"
else
echo 'password '"requisite"' pam_pwhistory.so' >> "/etc/pam.d/system-auth"
fi
fi
fi
fi
PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
regex="^\s*remember\s*="
line="remember = $var_password_pam_unix_remember"
if ! grep -q $regex $PWHISTORY_CONF; then
echo $line >> $PWHISTORY_CONF
else
sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
fi
if [ -e "/etc/pam.d/system-auth" ] ; then
PAM_FILE_PATH="/etc/pam.d/system-auth"
if [ -f /usr/bin/authselect ]; then
if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
# If not already in use, a custom profile is created preserving the enabled features.
if [[ ! $CURRENT_PROFILE == custom/* ]]; then
ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
authselect create-profile hardening -b $CURRENT_PROFILE
CURRENT_PROFILE="custom/hardening"
authselect apply-changes -b --backup=before-hardening-custom-profile
authselect select $CURRENT_PROFILE
for feature in $ENABLED_FEATURES; do
authselect enable-feature $feature;
done
authselect apply-changes -b --backup=after-hardening-custom-profile
fi
PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"
authselect apply-changes -b
fi
if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
fi
if [ -f /usr/bin/authselect ]; then
authselect apply-changes -b
fi
else
echo "/etc/pam.d/system-auth was not found" >&2
fi
else
PAM_FILE_PATH="/etc/pam.d/system-auth"
if [ -f /usr/bin/authselect ]; then
if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
# If not already in use, a custom profile is created preserving the enabled features.
if [[ ! $CURRENT_PROFILE == custom/* ]]; then
ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
authselect create-profile hardening -b $CURRENT_PROFILE
CURRENT_PROFILE="custom/hardening"
authselect apply-changes -b --backup=before-hardening-custom-profile
authselect select $CURRENT_PROFILE
for feature in $ENABLED_FEATURES; do
authselect enable-feature $feature;
done
authselect apply-changes -b --backup=after-hardening-custom-profile
fi
PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"
authselect apply-changes -b
fi
if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
# Line matching group + control + module was not found. Check group + module.
if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
# The control is updated only if one single line matches.
sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
else
echo 'password '"requisite"' pam_pwhistory.so' >> "$PAM_FILE_PATH"
fi
fi
# Check the option
if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_unix_remember"'/' "$PAM_FILE_PATH"
else
sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_unix_remember"' \3/' "$PAM_FILE_PATH"
fi
if [ -f /usr/bin/authselect ]; then
authselect apply-changes -b
fi
fi
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi