Disable X11 Forwarding

An XCCDF Rule

Description

The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the capability to encrypt remote X11 connections when SSH's X11Forwarding option is enabled.
The default SSH configuration disables X11Forwarding. The appropriate configuration is used if no value is set for X11Forwarding.
To explicitly disable X11 Forwarding, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:

X11Forwarding no

Rationale

Disable X11 forwarding unless there is an operational requirement to use X11 applications directly. There is a small risk that the remote X11 servers of users who are logged in via SSH with X11 forwarding could be compromised by other users on the X11 server. Note that even if X11 forwarding is disabled, users can always install their own forwarders.

ID: xccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding
Severity: Medium
References: CCI-000366

CM-6(b)

SRG-OS-000480-GPOS-00227

5.2.12

2.2.6
Updated: 8 months ago

- name: Disable X11 Forwarding
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config      create: false
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter X11Forwarding is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      line: X11Forwarding no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_x11_forwarding

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "X11Forwarding no" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Disable X11 Forwarding

Description

Rationale

Remediation - Ansible

Remediation - Shell Script