At a minimum, the audit system should collect administrator actions
for all users and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the default),
add the following line to a file with suffix .rules in the directory
/etc/audit/rules.d:
-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions
Rationale
The actions taken by system administrators should be audited to keep a record
of what was executed on the system, as well as, for accountability purposes.
ISA-62443-2-1-2009, Security for Industrial Automation and Control Systems Part 2-1: Establishing an Industrial Automation and Control Systems Security Program
- name: Gather the package facts
package_facts:
manager: auto
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Check if watch rule for /etc/sudoers already exists in /etc/audit/audit.rules
find:
paths: /etc/audit/
contains: ^\s*-w\s+/etc/sudoers\s+-p\s+wa(\s|$)+
patterns: audit.rules
register: find_existing_watch_audit_rules
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Add watch rule for /etc/sudoers in /etc/audit/audit.rules
lineinfile:
line: -w /etc/sudoers -p wa -k actions
state: present
dest: /etc/audit/audit.rules
create: true
mode: '0640'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Check if watch rule for /etc/sudoers already exists in /etc/audit/rules.d/
find:
paths: /etc/audit/rules.d
contains: ^\s*-w\s+/etc/sudoers\s+-p\s+wa(\s|$)+
patterns: '*.rules'
register: find_existing_watch_rules_d
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Search /etc/audit/rules.d for other rules with specified key actions
find:
paths: /etc/audit/rules.d
contains: ^.*(?:-F key=|-k\s+)actions$
patterns: '*.rules'
register: find_watch_key
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Use /etc/audit/rules.d/actions.rules as the recipient for the rule
set_fact:
all_files:
- /etc/audit/rules.d/actions.rules
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
is defined and find_existing_watch_rules_d.matched == 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Use matched file as the recipient for the rule
set_fact:
all_files:
- '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
is defined and find_existing_watch_rules_d.matched == 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Add watch rule for /etc/sudoers in /etc/audit/rules.d/
lineinfile:
path: '{{ all_files[0] }}'
line: -w /etc/sudoers -p wa -k actions
create: true
mode: '0640'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Check if watch rule for /etc/sudoers.d/ already exists in /etc/audit/audit.rules
find:
paths: /etc/audit/
contains: ^\s*-w\s+/etc/sudoers.d/\s+-p\s+wa(\s|$)+
patterns: audit.rules
register: find_existing_watch_audit_rules
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Add watch rule for /etc/sudoers.d/ in /etc/audit/audit.rules
lineinfile:
line: -w /etc/sudoers.d/ -p wa -k actions
state: present
dest: /etc/audit/audit.rules
create: true
mode: '0640'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Check if watch rule for /etc/sudoers.d/ already exists in /etc/audit/rules.d/
find:
paths: /etc/audit/rules.d
contains: ^\s*-w\s+/etc/sudoers.d/\s+-p\s+wa(\s|$)+
patterns: '*.rules'
register: find_existing_watch_rules_d
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Search /etc/audit/rules.d for other rules with specified key actions
find:
paths: /etc/audit/rules.d
contains: ^.*(?:-F key=|-k\s+)actions$
patterns: '*.rules'
register: find_watch_key
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Use /etc/audit/rules.d/actions.rules as the recipient for the rule
set_fact:
all_files:
- /etc/audit/rules.d/actions.rules
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
is defined and find_existing_watch_rules_d.matched == 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Use matched file as the recipient for the rule
set_fact:
all_files:
- '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
is defined and find_existing_watch_rules_d.matched == 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
- name: Add watch rule for /etc/sudoers.d/ in /etc/audit/rules.d/
lineinfile:
path: '{{ all_files[0] }}'
line: -w /etc/sudoers.d/ -p wa -k actions
create: true
mode: '0640'
when:
- '"audit" in ansible_facts.packages'
- ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
- find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
== 0
tags:
- CCE-91604-9
- CJIS-5.4.1.1
- NIST-800-171-3.1.7
- NIST-800-53-AC-2(7)(b)
- NIST-800-53-AC-6(9)
- NIST-800-53-AU-12(c)
- NIST-800-53-AU-2(d)
- NIST-800-53-CM-6(a)
- PCI-DSS-Req-10.2.2
- PCI-DSS-Req-10.2.5.b
- PCI-DSSv4-10.2.1.5
- audit_rules_sysadmin_actions
- low_complexity
- low_disruption
- medium_severity
- no_reboot_needed
- restrict_strategy
Remediation - Shell Script
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules | Rule already defined | Audit rules file to inspect |
# -----------------------------------------------------------------------------------------
# auditctl | Doesn't matter | /etc/audit/audit.rules |
# -----------------------------------------------------------------------------------------
# augenrules | Yes | /etc/audit/rules.d/*.rules |
# augenrules | No | /etc/audit/rules.d/$key.rules |
# -----------------------------------------------------------------------------------------
files_to_inspect=()
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')
# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
# Check if audit watch file system object rule for given path already present
if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"
then
# Rule is found => verify yet if existing rule definition contains
# all of the required access type bits
# Define BRE whitespace class shortcut
sp="[[:space:]]"
# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
# Split required access bits string into characters array
# (to check bit's presence for one bit at a time)
for access_bit in $(echo "wa" | grep -o .)
do
# For each from the required access bits (e.g. 'w', 'a') check
# if they are already present in current access bits for rule.
# If not, append that bit at the end
if ! grep -q "$access_bit" <<< "$current_access_bits"
then
# Concatenate the existing mask with the missing bit
current_access_bits="$current_access_bits$access_bit"
fi
done
# Propagate the updated rule's access bits (original + the required
# ones) back into the /etc/audit/audit.rules file for that rule
sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
else
# Rule isn't present yet. Append it at the end of $audit_rules_file file
# with proper key
echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"
fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules | Rule already defined | Audit rules file to inspect |
# -----------------------------------------------------------------------------------------
# auditctl | Doesn't matter | /etc/audit/audit.rules |
# -----------------------------------------------------------------------------------------
# augenrules | Yes | /etc/audit/rules.d/*.rules |
# augenrules | No | /etc/audit/rules.d/$key.rules |
# -----------------------------------------------------------------------------------------
files_to_inspect=()
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers" /etc/audit/rules.d/*.rules)
# For each of the matched entries
for match in "${matches[@]}"
do
# Extract filepath from the match
rulesd_audit_file=$(echo $match | cut -f1 -d ':')
# Append that path into list of files for inspection
files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
# Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
key_rule_file="/etc/audit/rules.d/actions.rules"
# If the actions.rules file doesn't exist yet, create it with correct permissions
if [ ! -e "$key_rule_file" ]
then
touch "$key_rule_file"
chmod 0640 "$key_rule_file"
fi
files_to_inspect+=("$key_rule_file")
fi
# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
# Check if audit watch file system object rule for given path already present
if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"
then
# Rule is found => verify yet if existing rule definition contains
# all of the required access type bits
# Define BRE whitespace class shortcut
sp="[[:space:]]"
# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
# Split required access bits string into characters array
# (to check bit's presence for one bit at a time)
for access_bit in $(echo "wa" | grep -o .)
do
# For each from the required access bits (e.g. 'w', 'a') check
# if they are already present in current access bits for rule.
# If not, append that bit at the end
if ! grep -q "$access_bit" <<< "$current_access_bits"
then
# Concatenate the existing mask with the missing bit
current_access_bits="$current_access_bits$access_bit"
fi
done
# Propagate the updated rule's access bits (original + the required
# ones) back into the /etc/audit/audit.rules file for that rule
sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
else
# Rule isn't present yet. Append it at the end of $audit_rules_file file
# with proper key
echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"
fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules | Rule already defined | Audit rules file to inspect |
# -----------------------------------------------------------------------------------------
# auditctl | Doesn't matter | /etc/audit/audit.rules |
# -----------------------------------------------------------------------------------------
# augenrules | Yes | /etc/audit/rules.d/*.rules |
# augenrules | No | /etc/audit/rules.d/$key.rules |
# -----------------------------------------------------------------------------------------
files_to_inspect=()
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')
# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
# Check if audit watch file system object rule for given path already present
if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"
then
# Rule is found => verify yet if existing rule definition contains
# all of the required access type bits
# Define BRE whitespace class shortcut
sp="[[:space:]]"
# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
# Split required access bits string into characters array
# (to check bit's presence for one bit at a time)
for access_bit in $(echo "wa" | grep -o .)
do
# For each from the required access bits (e.g. 'w', 'a') check
# if they are already present in current access bits for rule.
# If not, append that bit at the end
if ! grep -q "$access_bit" <<< "$current_access_bits"
then
# Concatenate the existing mask with the missing bit
current_access_bits="$current_access_bits$access_bit"
fi
done
# Propagate the updated rule's access bits (original + the required
# ones) back into the /etc/audit/audit.rules file for that rule
sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
else
# Rule isn't present yet. Append it at the end of $audit_rules_file file
# with proper key
echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"
fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules | Rule already defined | Audit rules file to inspect |
# -----------------------------------------------------------------------------------------
# auditctl | Doesn't matter | /etc/audit/audit.rules |
# -----------------------------------------------------------------------------------------
# augenrules | Yes | /etc/audit/rules.d/*.rules |
# augenrules | No | /etc/audit/rules.d/$key.rules |
# -----------------------------------------------------------------------------------------
files_to_inspect=()
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers.d/" /etc/audit/rules.d/*.rules)
# For each of the matched entries
for match in "${matches[@]}"
do
# Extract filepath from the match
rulesd_audit_file=$(echo $match | cut -f1 -d ':')
# Append that path into list of files for inspection
files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
# Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
key_rule_file="/etc/audit/rules.d/actions.rules"
# If the actions.rules file doesn't exist yet, create it with correct permissions
if [ ! -e "$key_rule_file" ]
then
touch "$key_rule_file"
chmod 0640 "$key_rule_file"
fi
files_to_inspect+=("$key_rule_file")
fi
# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
# Check if audit watch file system object rule for given path already present
if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"
then
# Rule is found => verify yet if existing rule definition contains
# all of the required access type bits
# Define BRE whitespace class shortcut
sp="[[:space:]]"
# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
# Split required access bits string into characters array
# (to check bit's presence for one bit at a time)
for access_bit in $(echo "wa" | grep -o .)
do
# For each from the required access bits (e.g. 'w', 'a') check
# if they are already present in current access bits for rule.
# If not, append that bit at the end
if ! grep -q "$access_bit" <<< "$current_access_bits"
then
# Concatenate the existing mask with the missing bit
current_access_bits="$current_access_bits$access_bit"
fi
done
# Propagate the updated rule's access bits (original + the required
# ones) back into the /etc/audit/audit.rules file for that rule
sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
else
# Rule isn't present yet. Append it at the end of $audit_rules_file file
# with proper key
echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"
fi
done
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi