Configure Kernel Parameter for Accepting Secure Redirects By Default

An XCCDF Rule

Description

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.secure_redirects = 0

Rationale

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects
Severity: Medium
References: BP28(R22)

1 11 12 13 14 15 16 18 2 3 4 6 7 8 9

APO01.06 APO13.01 BAI04.04 BAI10.01 BAI10.02 BAI10.03 BAI10.05 DSS01.03 DSS01.05 DSS03.01 DSS03.05 DSS05.02 DSS05.04 DSS05.05 DSS05.07 DSS06.02 DSS06.06

3.1.20

CCI-001551

4.2.3.4 4.3.3.4 4.3.3.5.1 4.3.3.5.2 4.3.3.5.3 4.3.3.5.4 4.3.3.5.5 4.3.3.5.6 4.3.3.5.7 4.3.3.5.8 4.3.3.6.1 4.3.3.6.2 4.3.3.6.3 4.3.3.6.4 4.3.3.6.5 4.3.3.6.6 4.3.3.6.7 4.3.3.6.8 4.3.3.6.9 4.3.3.7.1 4.3.3.7.2 4.3.3.7.3 4.3.3.7.4 4.3.4.3.2 4.3.4.3.3 4.4.3.3

SR 1.1 SR 1.10 SR 1.11 SR 1.12 SR 1.13 SR 1.2 SR 1.3 SR 1.4 SR 1.5 SR 1.6 SR 1.7 SR 1.8 SR 1.9 SR 2.1 SR 2.2 SR 2.3 SR 2.4 SR 2.5 SR 2.6 SR 2.7 SR 3.1 SR 3.5 SR 3.8 SR 4.1 SR 4.3 SR 5.1 SR 5.2 SR 5.3 SR 6.2 SR 7.1 SR 7.2 SR 7.6

A.10.1.1 A.11.1.4 A.11.1.5 A.11.2.1 A.12.1.1 A.12.1.2 A.12.1.3 A.12.5.1 A.12.6.2 A.13.1.1 A.13.1.2 A.13.1.3 A.13.2.1 A.13.2.2 A.13.2.3 A.13.2.4 A.14.1.2 A.14.1.3 A.14.2.2 A.14.2.3 A.14.2.4 A.17.2.1 A.6.1.2 A.7.1.1 A.7.1.2 A.7.3.1 A.8.2.2 A.8.2.3 A.9.1.1 A.9.1.2 A.9.2.3 A.9.4.1 A.9.4.4 A.9.4.5

CIP-007-3 R4 CIP-007-3 R4.1 CIP-007-3 R4.2 CIP-007-3 R5.1

CM-7(a) CM-7(b) SC-5 SC-7(a)

DE.AE-1 DE.CM-1 ID.AM-3 PR.AC-5 PR.DS-4 PR.DS-5 PR.IP-1 PR.PT-3 PR.PT-4

SRG-OS-000480-GPOS-00227

3.3.6
Updated: about 1 year ago

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/    contains: ^[\s]*net.ipv4.conf.default.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str <xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_sysctl_net_ipv4_conf_default_secure_redirects_value" use="legacy"/>
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.default.secure_redirects%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_default_secure_redirects.conf
        overwrite: true

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do
  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_secure_redirects_value='<xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_sysctl_net_ipv4_conf_default_secure_redirects_value" use="legacy"/>'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce=""
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Configure Kernel Parameter for Accepting Secure Redirects By Default

Description

Rationale

Remediation - Ansible

Remediation - Kubernetes Patch

Remediation - Shell Script