Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server

An XCCDF Rule

Description

The rsyslog daemon should not accept remote messages unless the system acts as a log server. To ensure that it is not listening on the network, ensure any of the following lines are not found in rsyslog configuration files. If using legacy syntax:

$ModLoad imtcp
$InputTCPServerRun port
$ModLoad imudp
$UDPServerRun port
$ModLoad imrelp
$InputRELPServerRun port

If using RainerScript syntax:

module(load="imtcp")
module(load="imudp")
input(type="imtcp" port="514")
input(type="imudp" port="514")

Rationale

Any process which receives messages from the network incurs some risk of receiving malicious messages. This risk can be eliminated for rsyslog by configuring it not to listen on the network.

ID: xccdf_org.ssgproject.content_rule_rsyslog_nolisten
Severity: Medium
References: 1 11 12 13 14 15 16 18 3 4 5 6 8 9

APO01.06 APO11.04 APO13.01 BAI03.05 BAI10.01 BAI10.02 BAI10.03 BAI10.05 DSS01.05 DSS03.01 DSS05.02 DSS05.04 DSS05.07 DSS06.02 MEA02.01

CCI-000318 CCI-000366 CCI-000368 CCI-001812 CCI-001813 CCI-001814

4.2.3.4 4.3.3.3.9 4.3.3.4 4.3.3.5.8 4.3.4.3.2 4.3.4.3.3 4.3.4.4.7 4.4.2.1 4.4.2.2 4.4.2.4 4.4.3.3

SR 2.10 SR 2.11 SR 2.12 SR 2.8 SR 2.9 SR 3.1 SR 3.5 SR 3.8 SR 4.1 SR 4.3 SR 5.1 SR 5.2 SR 5.3 SR 7.1 SR 7.6

0988 1405

A.10.1.1 A.11.1.4 A.11.1.5 A.11.2.1 A.12.1.1 A.12.1.2 A.12.4.1 A.12.4.2 A.12.4.3 A.12.4.4 A.12.5.1 A.12.6.2 A.12.7.1 A.13.1.1 A.13.1.2 A.13.1.3 A.13.2.1 A.13.2.2 A.13.2.3 A.13.2.4 A.14.1.2 A.14.1.3 A.14.2.2 A.14.2.3 A.14.2.4 A.6.1.2 A.7.1.1 A.7.1.2 A.7.3.1 A.8.2.2 A.8.2.3 A.9.1.1 A.9.1.2 A.9.2.3 A.9.4.1 A.9.4.4 A.9.4.5

CM-6(a) CM-7(a) CM-7(b)

DE.AE-1 ID.AM-3 PR.AC-5 PR.DS-5 PR.IP-1 PR.PT-1 PR.PT-4

SRG-OS-000480-GPOS-00227

RHEL-07-031010

SV-204575r853986_rule

CCE-80192-8

5.1.1.7
Updated: about 1 year ago

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Define Rsyslog Config Lines Regex in Legacy Syntax
  ansible.builtin.set_fact:
    rsyslog_listen_legacy_regex: ^\s*\$(((Input(TCP|RELP)|UDP)ServerRun)|ModLoad\s+(imtcp|imudp|imrelp))
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for Legacy Config Lines in Rsyslog Main Config File
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: '{{ rsyslog_listen_legacy_regex }}'
  register: rsyslog_listen_legacy_main_file
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for Legacy Config Lines in Rsyslog Include Files
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: '{{ rsyslog_listen_legacy_regex }}'
  register: rsyslog_listen_legacy_include_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Assemble List of Config Files With Listen Lines in Legacy Syntax
  ansible.builtin.set_fact:
    rsyslog_legacy_remote_listen_files: '{{ rsyslog_listen_legacy_main_file.files
      | map(attribute=''path'') | list + rsyslog_listen_legacy_include_files.files
      | map(attribute=''path'') | list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Comment Listen Config Lines Wherever Defined Using Legacy Syntax
  ansible.builtin.replace:
    path: '{{ item }}'
    regexp: '{{ rsyslog_listen_legacy_regex }}'
    replace: '# \1'
  loop: '{{ rsyslog_legacy_remote_listen_files }}'
  register: rsyslog_listen_legacy_comment
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_legacy_remote_listen_files | length > 0
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Define Rsyslog Config Lines Regex in RainerScript Syntax
  ansible.builtin.set_fact:
    rsyslog_listen_rainer_regex: ^\s*(module|input)\((load|type)="(imtcp|imudp)".*$
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for RainerScript Config Lines in Rsyslog Main Config File
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: '{{ rsyslog_listen_rainer_regex }}'
  register: rsyslog_rainer_remote_main_file
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for RainerScript Config Lines in Rsyslog Include Files
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: '{{ rsyslog_listen_rainer_regex }}'
  register: rsyslog_rainer_remote_include_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Assemble List of Config Files With Listen Lines in RainerScript
  ansible.builtin.set_fact:
    rsyslog_rainer_remote_listen_files: '{{ rsyslog_rainer_remote_main_file.files
      | map(attribute=''path'') | list + rsyslog_rainer_remote_include_files.files
      | map(attribute=''path'') | list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Comment Listen Config Lines Wherever Defined Using RainerScript
  ansible.builtin.replace:
    path: '{{ item }}'
    regexp: '{{ rsyslog_listen_rainer_regex }}'
    replace: '# \1'
  loop: '{{ rsyslog_rainer_remote_listen_files }}'
  register: rsyslog_listen_rainer_comment
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_rainer_remote_listen_files | length > 0
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Restart Rsyslog if Any Line Were Commented Out
  ansible.builtin.service:
    name: rsyslog
    state: restarted
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_listen_legacy_comment is changed or rsyslog_listen_rainer_comment is changed
  tags:
  - CCE-80192-8
  - DISA-STIG-RHEL-07-031010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

legacy_regex='^\s*\$(((Input(TCP|RELP)|UDP)ServerRun)|ModLoad\s+(imtcp|imudp|imrelp))'
rainer_regex='^\s*(module|input)\((load|type)="(imtcp|imudp)".*$'
readarray -t legacy_targets < <(grep -l -E -r "${legacy_regex[@]}" /etc/rsyslog.conf /etc/rsyslog.d/)
readarray -t rainer_targets < <(grep -l -E -r "${rainer_regex[@]}" /etc/rsyslog.conf /etc/rsyslog.d/)

config_changed=false
if [ ${#legacy_targets[@]} -gt 0 ]; then
    for target in "${legacy_targets[@]}"; do
        sed -E -i "/$legacy_regex/ s/^/# /" "$target"
    done
    config_changed=true
fi

if [ ${#rainer_targets[@]} -gt 0 ]; then
    for target in "${rainer_targets[@]}"; do
        sed -E -i "/$rainer_regex/ s/^/# /" "$target"
    done
    config_changed=true
fi

if $config_changed; then
    systemctl restart rsyslog.service
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server

Description

Rationale

Remediation - Ansible

Remediation - Shell Script