Disable SSH Support for .rhosts Files

An XCCDF Rule

Description

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

ID: xccdf_org.ssgproject.content_rule_sshd_disable_rhosts
Severity: Medium
References: 11 12 14 15 16 18 3 5 9

5.5.6

BAI10.01 BAI10.02 BAI10.03 BAI10.05 DSS05.02 DSS05.04 DSS05.05 DSS05.07 DSS06.03 DSS06.06

3.1.12

CCI-000366

4.3.3.2.2 4.3.3.5.1 4.3.3.5.2 4.3.3.5.3 4.3.3.5.4 4.3.3.5.5 4.3.3.5.6 4.3.3.5.7 4.3.3.5.8 4.3.3.6.1 4.3.3.6.2 4.3.3.6.3 4.3.3.6.4 4.3.3.6.5 4.3.3.6.6 4.3.3.6.7 4.3.3.6.8 4.3.3.6.9 4.3.3.7.1 4.3.3.7.2 4.3.3.7.3 4.3.3.7.4 4.3.4.3.2 4.3.4.3.3

SR 1.1 SR 1.10 SR 1.11 SR 1.12 SR 1.13 SR 1.2 SR 1.3 SR 1.4 SR 1.5 SR 1.6 SR 1.7 SR 1.8 SR 1.9 SR 2.1 SR 2.2 SR 2.3 SR 2.4 SR 2.5 SR 2.6 SR 2.7 SR 7.6

A.12.1.2 A.12.5.1 A.12.6.2 A.14.2.2 A.14.2.3 A.14.2.4 A.6.1.2 A.7.1.1 A.9.1.2 A.9.2.1 A.9.2.3 A.9.4.1 A.9.4.4 A.9.4.5

AC-17(a) CM-6(a) CM-7(a) CM-7(b)

PR.AC-4 PR.AC-6 PR.IP-1 PR.PT-3

FIA_UAU.1

2.2.6

SRG-OS-000480-GPOS-00227
Updated: about 1 year ago

- name: Find sshd_config included files
  shell: |-
    included_files=$(grep -oP "^\s*(?i)include.*" /etc/ssh/sshd_config | sed -e 's/\s*Include\s*//i' | sed -e 's|^[^/]|/etc/ssh/&|')
    [[ -n $included_files ]] && ls $included_files || true
  register: sshd_config_included_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts

- name: Comment conf from included files
  replace:
    path: '{{ item }}'
    regexp: ^(\s*IgnoreRhosts.*)$
    replace: '# \1'
  loop: '{{ sshd_config_included_files.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts

- name: Disable SSH Support for .rhosts Files
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      line: IgnoreRhosts yes
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Find the include keyword, extract from the line the glob expression representing included files.
# And if it is a relative path prepend '/etc/ssh/'
included_files=$(grep -oP "^\s*(?i)include.*" /etc/ssh/sshd_config | sed -e 's/\s*include\s*//I' | sed -e 's|^[^/]|/etc/ssh/&|')for included_file in ${included_files} ; do
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts/Id" "$included_file"
done

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "IgnoreRhosts yes" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Disable SSH Support for .rhosts Files

Description

Rationale

Remediation - Ansible

Remediation - Shell Script