Disable Host-Based Authentication

An XCCDF Rule

Description

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.
The default SSH configuration disables host-based authentication. The appropriate configuration is used if no value is set for HostbasedAuthentication.
To explicitly disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

ID: xccdf_org.ssgproject.content_rule_disable_host_auth
Severity: Medium
References: 11 12 14 15 16 18 3 5 9

5.5.6

BAI10.01 BAI10.02 BAI10.03 BAI10.05 DSS05.02 DSS05.04 DSS05.05 DSS05.07 DSS06.03 DSS06.06

3.1.12

CCI-000366

164.308(a)(4)(i) 164.308(b)(1) 164.308(b)(3) 164.310(b) 164.312(e)(1) 164.312(e)(2)(ii)

4.3.3.2.2 4.3.3.5.1 4.3.3.5.2 4.3.3.5.3 4.3.3.5.4 4.3.3.5.5 4.3.3.5.6 4.3.3.5.7 4.3.3.5.8 4.3.3.6.1 4.3.3.6.2 4.3.3.6.3 4.3.3.6.4 4.3.3.6.5 4.3.3.6.6 4.3.3.6.7 4.3.3.6.8 4.3.3.6.9 4.3.3.7.1 4.3.3.7.2 4.3.3.7.3 4.3.3.7.4 4.3.4.3.2 4.3.4.3.3

SR 1.1 SR 1.10 SR 1.11 SR 1.12 SR 1.13 SR 1.2 SR 1.3 SR 1.4 SR 1.5 SR 1.6 SR 1.7 SR 1.8 SR 1.9 SR 2.1 SR 2.2 SR 2.3 SR 2.4 SR 2.5 SR 2.6 SR 2.7 SR 7.6

0421 0422 0431 0974 1173 1401 1504 1505 1546 1557 1558 1559 1560 1561

A.12.1.2 A.12.5.1 A.12.6.2 A.14.2.2 A.14.2.3 A.14.2.4 A.6.1.2 A.7.1.1 A.9.1.2 A.9.2.1 A.9.2.3 A.9.4.1 A.9.4.4 A.9.4.5

CIP-003-8 R5.1.1 CIP-003-8 R5.3 CIP-004-6 R2.2.3 CIP-004-6 R2.3 CIP-007-3 R5.1 CIP-007-3 R5.1.2 CIP-007-3 R5.2 CIP-007-3 R5.3.1 CIP-007-3 R5.3.2 CIP-007-3 R5.3.3

AC-17(a) AC-3 CM-6(a) CM-7(a) CM-7(b)

PR.AC-4 PR.AC-6 PR.IP-1 PR.PT-3

FIA_UAU.1

8.3.1

SRG-OS-000480-GPOS-00229
Updated: about 1 year ago

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Find the include keyword, extract from the line the glob expression representing included files.
# And if it is a relative path prepend '/etc/ssh/'
included_files=$(grep -oP "^\s*(?i)include.*" /etc/ssh/sshd_config | sed -e 's/\s*include\s*//I' | sed -e 's|^[^/]|/etc/ssh/&|')for included_file in ${included_files} ; do
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication/Id" "$included_file"
done

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "HostbasedAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Find sshd_config included files
  shell: |-
    included_files=$(grep -oP "^\s*(?i)include.*" /etc/ssh/sshd_config | sed -e 's/\s*Include\s*//i' | sed -e 's|^[^/]|/etc/ssh/&|')
    [[ -n $included_files ]] && ls $included_files || true
  register: sshd_config_included_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Comment conf from included files
  replace:
    path: '{{ item }}'
    regexp: ^(\s*HostbasedAuthentication.*)$
    replace: '# \1'
  loop: '{{ sshd_config_included_files.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable Host-Based Authentication
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      line: HostbasedAuthentication no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Disable Host-Based Authentication

Description

Rationale

Remediation - Shell Script

Remediation - Ansible