Zebra Android 13 must be configured to disable Bluetooth or configured via User Based Enforcement (UBE) to allow Bluetooth for only Headset Profile (HSP), Hands-Free Profile (HFP), and Serial Port Profile (SPP).

An XCCDF Rule

Description

Some Bluetooth profiles provide the capability for remote transfer of sensitive DOD data without encryption or otherwise do not meet DOD IT security policies and therefore must be disabled. SFR ID: FMT_SMF_EXT.1.1/BLUETOOTH BT-8

ID: SV-270155r1053205_rule
Version: ZEBR-13-009400
Severity: Low
References: CCI-000381 CCI-001761
Updated: about 2 months ago

Remediation Templates

Configure the Zebra Android 13 device to disable Bluetooth or if the AO has approved the use of Bluetooth (for example, for car hands-free use), train the user to connect to only authorized Bluetooth devices using only HSP, HFP, or SPP Bluetooth capable devices (UBE).

To disable Bluetooth use the following procedure:

On the EMM Console:
COBO:

1. Open "User restrictions" section.
2. Toggle "Disallow Bluetooth" to "ON".

COPE:

1. Open "User restrictions on parent" section.
2. Toggle "Disallow Bluetooth" to "ON".

The user training requirement is satisfied in requirement ZEBR-13-009800.

Zebra Android 13 must be configured to disable Bluetooth or configured via User Based Enforcement (UBE) to allow Bluetooth for only Headset Profile (HSP), Hands-Free Profile (HFP), and Serial Port Profile (SPP).

Description

Remediation Templates

A Manual Procedure