The HYCU virtual appliance must be configured to synchronize internal information system clocks using redundant authoritative time sources.
An XCCDF Rule
Description
The loss of connectivity to a particular authoritative time source will result in the loss of time synchronization (free-run mode) and increasingly inaccurate time stamps on audit events and other functions. Multiple time sources provide redundancy by including a secondary source. Time synchronization is usually a hierarchy; clients synchronize time to a local source while that source synchronizes its time to a more accurate source. The network device must use an authoritative time server and/or be configured to use redundant authoritative time sources. This requirement is related to the comparison done in CCI-001891. DOD-approved solutions consist of a combination of a primary and secondary time source using a combination or multiple instances of the following: a time server designated for the appropriate DOD network (NIPRNet/SIPRNet); United States Naval Observatory (USNO) time servers; and/or the Global Positioning System (GPS). The secondary time source must be located in a different geographic region than the primary time source. Satisfies: SRG-APP-000920-NDM-000320, SRG-APP-000925-NDM-000330
- ID
- SV-268216r1038348_rule
- Version
- HYCU-ND-000440
- Severity
- Medium
- References
- Updated
Remediation Templates
A Manual Procedure
Start the time synchronization by logging on to the HYCU console and executing the following command:
sudo systemctl restart chronyd
Additional assistance can be found at: https://support.hycu.com/hc/en-us/articles/115005424345-HYCU-system-time