Set GNOME3 Screensaver Inactivity Timeout

An XCCDF Rule

Description

The idle time-out value for inactivity in the GNOME3 desktop is configured via the idle-delay setting must be set under an appropriate configuration file(s) in the /etc/dconf/db/local.d directory and locked in /etc/dconf/db/local.d/locks directory to prevent user modification.

For example, to configure the system for a 15 minute delay, add the following to /etc/dconf/db/local.d/00-security-settings:

[org/gnome/desktop/session]
idle-delay=uint32 900

Rationale

A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME3 can be configured to identify when a user's session has idled and take action to initiate a session lock.

ID: xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay
Severity: Medium
References: 1 12 15 16

5.5.5

DSS05.04 DSS05.10 DSS06.10

3.1.10

CCI-000057 CCI-000060

4.3.3.6.1 4.3.3.6.2 4.3.3.6.3 4.3.3.6.4 4.3.3.6.5 4.3.3.6.6 4.3.3.6.7 4.3.3.6.8 4.3.3.6.9

SR 1.1 SR 1.10 SR 1.2 SR 1.5 SR 1.7 SR 1.8 SR 1.9

A.18.1.4 A.9.2.1 A.9.2.4 A.9.3.1 A.9.4.2 A.9.4.3

AC-11(a) CM-6(a)

PR.AC-7

FMT_MOF_EXT.1

Req-8.1.8

8.2.8

SRG-OS-000029-GPOS-00010 SRG-OS-000031-GPOS-00012
Updated: about 1 year ago

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.5
  - NIST-800-171-3.1.10  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
- name: XCCDF Value inactivity_timeout_value # promote to variable
  set_fact:
    inactivity_timeout_value: !!str <xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_inactivity_timeout_value" use="legacy"/>
  tags:
    - always

- name: Set GNOME3 Screensaver Inactivity Timeout
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/session
    option: idle-delay
    value: uint32 {{ inactivity_timeout_value }}
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

inactivity_timeout_value='<xccdf-1.2:sub xmlns:xccdf-1.2="http://checklists.nist.gov/xccdf/1.2" idref="xccdf_org.ssgproject.content_value_inactivity_timeout_value" use="legacy"/>'

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/session\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*idle-delay\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)idle-delay(\s*=)/#\1idle-delay\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/session\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/session]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "uint32 ${inactivity_timeout_value}")"
if grep -q "^\\s*idle-delay\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*idle-delay\\s*=\\s*.*/idle-delay=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/session\\]|a\\idle-delay=${escaped_value}" "${DCONFFILE}"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Set GNOME3 Screensaver Inactivity Timeout

Description

Rationale

Remediation - Ansible

Remediation - Shell Script